Français - English - Intranet
Unité Matériaux et Transformations empty space

Unité Matériaux et Transformations
CNRS UMR 8207 - Université de Lille

UMET - Publications

2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010

UMET publications in LillOA (Lille Open Archive)

Publications in international research journals

  1. S. Klaimy, C. Ciotonea, J. Dhainaut, S. Royer, M. Casetta, S. Duquesne, G. Tricot, J. Lamonier, Flash Catalytic Pyrolysis of Polyethylene over (Alumino)silicate Materials, ChemCatChem 12;4, 1109-1116 (2020), [doi: 10.1002/cctc.201901819, LillOA]
  2. M. Lebrini, F. Suedile, P. Salvin, C. Roos, A. Zarrouk, F. Bentiss, c. Jama, Bagassa guianensis ethanol extract used as sustainable eco-friendly inhibitor for zinc corrosion in 3% NaCl: Electrochemical and XPS studies, Surfaces and Interfaces 100588 (2020), [doi: 10.1016/j.surfin.2020.100588, LillOA]
  3. M. Lebrini, F. Suedile, P. Salvin, C. Roos, A. Zarrouk, c. Jama, Bagassa guianensis ethanol extract used as sustainable eco-friendly inhibitor for zinc corrosion in 3% NaCl: Electrochemical and XPS studies, Surfaces and Interfaces 100588 (2020), [doi: 10.1016/j.surfin.2020.100588, LillOA]
  4. J.-F. Brun, C. Binet, J.-F. Tahon, A. Addad, P. Tranchard, S. Barrau, Thermoelectric properties of bulk multi-walled carbon nanotube - poly(vinylidene fluoride) nanocomposites: Study of the structure/property relationships, Synthetic Metals 116525 (2020), [doi: 10.1016/j.synthmet.2020.116525, LillOA]
  5. A. Ramgobin, G. Fontaine, S. Bourbigot, A Case Study of Polyether Ether Ketone (I): Investigating the Thermal and Fire Behavior of a High-Performance Material, Polymers 12;8, 1789 (2020), [doi: 10.3390/polym12081789, LillOA]
  6. A. Ramgobin, G. Fontaine, S. Bourbigot, Oxygen concentration and modeling thermal decomposition of a high‐performance material: A case study of polyimide (Cirlex), Polymers for Advanced Technologies (2020), [doi: 10.1002/pat.5060, LillOA]
  7. W. Tang, Z. Qin, F. Liu, S. Gong, C. Peng, X. Gu, S. Zhang, X. Wang, X. Jin, S. Bourbigot, Influence of two kinds of low dimensional nano-sized silicate clay on the flame retardancy of polypropylene, Materials Chemistry and Physics 256, 123743 (2020), [doi: 10.1016/j.matchemphys.2020.123743, LillOA]
  8. S. Merkel, A. Lincot, S. Petitgirard, Microstructural effects and mechanism of bcc-hcp-bcc transformations in polycrystalline iron, Physical Review B 102, 104103 (2020), [doi: 10.1103/PhysRevB.102.104103, LillOA]
  9. M.-N. Avettand-Fènoël, T. Nagaoka, M. Marinova, R. Taillard, Upon the effect of Zn during friction stir welding of aluminum-copper and aluminum-brass systems, Journal of Manufacturing Processes 58, 259-278 (2020), [doi: 10.1016/j.jmapro.2020.08.006, LillOA]
  10. A. Sriba, J.-B. Vogt, Galvanic Coupling Effect on Pitting Corrosion of 316L Austenitic Stainless Steel Welded Joints, Metals and Materials International (2020), [doi: 10.1007/s12540-020-00789-4, LillOA]
  11. J. Junthip, N. Tabary, M. Maton, S. Ouerghemmi, J.-N. STAELENS, F. Cazaux, C. Neut, N. Blanchemain, B. Martel, Release-killing properties of a textile modified by a layer-by-layer coating based on two oppositely charged cyclodextrin polyelectrolytes, International Journal of Pharmaceutics 587, 119730 (2020), [doi: 10.1016/j.ijpharm.2020.119730, LillOA]
  12. S. Kossman, L.B. Coelho, A. Mejias, A. Montagne, A. Van Gorp, T. Coorevits, M. Touzin, M. Poorteman, M.-G. Olivier, A. Iost, M.H. Staia, Impact of industrially applied surface finishing processes on tribocorrosion performance of 316L stainless steel, Wear 203341 (2020), [doi: 10.1016/j.wear.2020.203341, LillOA]
  13. S. Bourbigot, J. Sarazin, T. Bensabath, Intumescent polypropylene in extreme fire conditions, Fire Safety Journal 103082 (2020), [doi: 10.1016/j.firesaf.2020.103082, LillOA]
  14. L. Geoffroy, A.-L. Davesne, S. Bellayer, F. Blanchard, E. Richard, F. Samyn, M. Jimenez, S. Bourbigot, 3D printed sandwich materials filled with hydrogels for extremely low heat release rate, Polymer Degradation and Stability 179, 109269 (2020), [doi: 10.1016/j.polymdegradstab.2020.109269, LillOA]
  15. A. Ramgobin, G. Fontaine, S. Bourbigot, Investigation of the thermal stability and fire behavior of high performance polymer: A case study of polyimide, Fire Safety Journal 103060 (2020), [doi: 10.1016/j.firesaf.2020.103060, LillOA]
  16. A. Attou, M. Tourabi, A. Benikdes, O. Benali, H. Ouici, F. Benhiba, A. Zarrouk, c. Jama, F. Bentiss, Experimental studies and computational exploration on the 2-amino-5-(2-methoxyphenyl)-1,3,4-thiadiazole as novel corrosion inhibitor for mild steel in acidic environment, Colloids and Surfaces A: Physicochemical and Engineering Aspects 125320 (2020), [doi: 10.1016/j.colsurfa.2020.125320, LillOA]
  17. M. El Faydy, F. Benhiba, A. Berisha, Y. Kerroum, c. Jama, B. Lakhrissi, A. Guenbour, I. Warad, A. Zarrouk, An experimental-coupled empirical investigation on the corrosion inhibitory action of 7-alkyl-8-Hydroxyquinolines on C35E steel in HCl electrolyte, Journal of Molecular Liquids 113973 (2020), [doi: 10.1016/j.molliq.2020.113973, LillOA]
  18. A. Ramgobin, G. Fontaine, S. Bourbigot, A Case Study of Polyetheretherketone (II): Playing with Oxygen Concentration and Modeling Thermal Decomposition of a High-Performance Material, Polymers 12;7, 1577 (2020), [doi: 10.3390/polym12071577, LillOA]
  19. G.-F. Bouobda Moladje, L. Thuinet, C. Becquart, A. Legris, A phase field model for dislocation climb under irradiation: Formalism and applications to pure bcc iron and ferritic alloys, International Journal of Plasticity 102810 (2020), [doi: 10.1016/j.ijplas.2020.102810, LillOA]
  20. M. Lebrini, W. Benkayba, c. Jama, F. Bentiss, C. Roos, 2-Amino-1-(4-aminophenyl)-1H-pyrrolo(2,3-b)quinoxaline-3- carbonitrile as an efficient inhibitor for the corrosion of C38 steel in hydrochloric acid solution, International Journal of Electrochemical Science 2326-2334 (2020), [doi: 10.20964/2020.03.46, LillOA]
  21. M. Rbaa, F. Benhiba, M. Galai, A.S. Abousalem, M. Ouakki, C.-H. Lai, B. Lakhrissi, c. Jama, I. Warad, M. Ebn Touhami, A. Zarrouk, Synthesis and characterization of novel Cu (II) and Zn (II) complexes of 5-{[(2-Hydroxyethyl) sulfanyl] methyl}-8-hydroxyquinoline as effective acid corrosion inhibitor by experimental and computational testings, Chemical Physics Letters 137771 (2020), [doi: 10.1016/j.cplett.2020.137771, LillOA]
  22. P. Hirel, P. Carrez, P. Cordier, Ferroelasticity in MgSiO3 bridgmanite: Assessing the intrinsic structure and motion of (-110) twin walls with atomic-scale simulations, Scripta Materialia 188, 102-106 (2020), [doi: 10.1016/j.scriptamat.2020.07.016, LillOA]
  23. S. Fadlallah, J. Jothieswaran, I. Del Rosal, L. Maron, F. Bonnet, M. Visseaux, Rationalizing the Reactivity of Mixed Allyl Rare-Earth Borohydride Complexes with DFT Studies, Catalysts 10, 820 (2020), [doi: 10.3390/catal10080820, LillOA]
  24. B. Christiaen, C. Domain, L. Thuinet, A. Ambard, A. Legris, Influence of vacancy diffusional anisotropy: Understanding the growth of zirconium alloys under irradiation and their microstructure evolution, Acta Materialia 631-644 (2020), [doi: 10.1016/j.actamat.2020.06.004, LillOA]
  25. G.-F. Bouobda Moladje, L. Thuinet, C. Domain, C. Becquart, A. Legris, Phase-field calculations of sink strength in Al, Ni, and Fe: A detailed study of elastic effects, Computational Materials Science 109905 (2020), [doi: 10.1016/j.commatsci.2020.109905, LillOA]
  26. S. Ritterbex, P. Carrez, P. Cordier, Deformation across the mantle transition zone: A theoretical mineral physics view, Earth and Planetary Science Letters 547, 116438 (2020), [doi: 10.1016/j.epsl.2020.116438, LillOA]
  27. M. Rbaa, M. Ouakki, M. Galai, A. Berisha, B. Lakhrissi, c. Jama, I. Warad, A. Zarrouk, Simple preparation and characterization of novel 8-Hydroxyquinoline derivatives as effective acid corrosion inhibitor for mild steel: Experimental and theoretical studies, Colloids and Surfaces A: Physicochemical and Engineering Aspects 125094 (2020), [doi: 10.1016/j.colsurfa.2020.125094, LillOA]
  28. M. El Faydy, B. Lakhrissi, c. Jama, A. Zarrouk, L.O. Olasunkanmi, E.E. Ebenso, F. Bentiss, Electrochemical, surface and computational studies on the inhibition performance of some newly synthesized 8-hydroxyquinoline derivatives containing benzimidazole moiety against the corrosion of carbon steel in phosphoric acid environment, Journal of Materials Research and Technology 9;1, 727-748 (2020), [doi: 10.1016/j.jmrt.2019.11.014, LillOA]
  29. H. Bourazmi, M. Rbaa, R. Benkaddour, F. Bentiss, c. Jama, J. Costa, M. Tabyaoui, A. Zarrouk, Essential Oil of Salvia officinalis as Novel Eco-Friendly Inhibitor for Carbon Steel in HCl Solution: Weight Loss, Electrochemical and XPS Studies, Protection of Metals and Physical Chemistry of Surfaces 56;2, 438-449 (2020), [doi: 10.1134/s2070205120020045, LillOA]
  30. S. Chemchoub, L. Oularbi, A. El Attar, S.A. Younssi, F. Bentiss, c. Jama, M. El Rhazi, Cost-effective non-noble metal supported on conducting polymer composite such as nickel nanoparticles/polypyrrole as efficient anode electrocatalyst for ethanol oxidation, Materials Chemistry and Physics 123009 (2020), [doi: 10.1016/j.matchemphys.2020.123009, LillOA]
  31. E. Louisy, G. Fontaine, V. Gaucher, F. Bonnet, G. Stoclet, Comparative studies of thermal and mechanical properties of macrocyclic versus linear polylactide, Polymer Bulletin (2020), [doi: 10.1007/s00289-020-03290-5, LillOA]
  32. J.-C. Viennet, S. Bernard, C. Le Guillou, V. Sautter, P. Schmitt-Kopplin, O. Beyssac, S. Pont, B. Zanda, R. Hewins, L. Remusat, Tardi-magmatic precipitation of Martian Fe/Mg-rich clay minerals via igneous differentiation, Geochemical Perspectives Letters 47-52 (2020), [doi: 10.7185/geochemlet.2023, LillOA]
  33. S. Dadbakhsh, R. Mertens, K. Vanmeensel, G. Ji, J.-P. Kruth, In situ transformations during SLM of an ultra-strong TiC reinforced Ti composite, Scientific Reports 10;1, (2020), [doi: 10.1038/s41598-020-67434-3, LillOA]
  34. S. Bellayer, M. Jimenez, S. Barrau, A. Marin, J. Sarazin, S. Bourbigot, Formulation of eco-friendly sol–gel coatings to flame-retard flexible polyurethane foam, Green materials 1-11 (2020), [doi: 10.1680/jgrma.19.00059, LillOA]
  35. N. Bricout, F. Chai, J. Sobocinski, A. Hertault, W. Laure, A. Ung, P. Woisel, J. Lyskawa, N. Blanchemain, Immobilisation of an anti-platelet adhesion and anti-thrombotic drug (EP224283) on polydopamine coated vascular stent promoting anti-thrombogenic properties, Materials Science and Engineering: C 110967 (2020), [doi: 10.1016/j.msec.2020.110967, LillOA]
  36. S. Fadlallah, N. Tabary, S. Noel, B. Leger, F. Cazaux, E. Monflier, B. Martel, Synthesis of novel catalytic composite nanofibers containing ruthenium nanoparticles stabilized by a citric acid-β-cyclodextrin polymer, Nanoscale Advances 2;5, 2087-2098 (2020), [doi: 10.1039/c9na00791a, LillOA]
  37. D. Kersani, J. Mougin, M. Lopez, S. Willai, N. Tabary, F. Cazaux, L. Janus, M. Maton, F. Chai, J. Sobocinski, N. Blanchemain, B. Martel, Stent coating by electrospinning with chitosan/poly-cyclodextrin based nanofibers loaded with simvastatin for restenosis prevention, European Journal of Pharmaceutics and Biopharmaceutics 150, 156-167 (2020), [doi: 10.1016/j.ejpb.2019.12.017, LillOA]
  38. L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, Bilayer Intumescent Paint Metal Laminates: A Novel Design for a High-Performance Fire Barrier, Industrial & Engineering Chemistry Research 59;7, 2988-2997 (2020), [doi: 10.1021/acs.iecr.9b06345, LillOA]
  39. X. Liu, X. Meng, J. Sun, W. Tang, S. Chen, X. Peng, X. Gu, B. Fei, S. Bourbigot, S. Zhang, Improving the flame retardant properties of polyester-cotton blend fabrics by introducing an intumescent coating via layer by layer assembly, Journal of Applied Polymer Science 49253 (2020), [doi: 10.1002/app.49253, LillOA]
  40. Q. Sun, Y. Ding, S.I. Stoliarov, J. Sun, G. Fontaine, S. Bourbigot, Development of a pyrolysis model for an intumescent flame retardant system: Poly(lactic acid) blended with melamine and ammonium polyphosphate, Composites Part B: Engineering 108055 (2020), [doi: 10.1016/j.compositesb.2020.108055, LillOA]
  41. H. Yang, B. Yu, X. Xu, S. Bourbigot, H. Wang, P. Song, Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials, Green Chemistry 22;7, 2129-2161 (2020), [doi: 10.1039/d0gc00449a, LillOA]
  42. H. Guo, D. Hourdet, A. Marcellan, F. Stoffelbach, J. Lyskawa, L. De Smet, A. Vebr, R. Hoogenboom, P. Woisel, Dual Responsive Regulation of Host–Guest Complexation in Aqueous Media to Control Partial Release of the Host, Chemistry - A European Journal 26;6, 1292-1297 (2020), [doi: 10.1002/chem.201904287, LillOA]
  43. J. Immoor, H. Marquardt, L.M. Miyagi, S. Speziale, S. Merkel, I. Schwark, A. Ehnes, H.-P. Liermann, An improved setup for radial diffraction experiments at high pressures and high temperatures in a resistive graphite-heated diamond anvil cell, Review of Scientific Instruments 91;4, 045121 (2020), [doi: 10.1063/1.5143293, LillOA]
  44. A. Hamieh, F. Ponchel, S. Barrau, D. Remiens, Synthesis of lead-free (Bi0,5Na0,5)TiO3 thin film by RF magnetron sputtering: Impact of Na on the properties of film, Ferroelectrics 556;1, 79-86 (2020), [doi: 10.1080/00150193.2020.1713345, LillOA]
  45. J. Marin‐Carbonne, V. Busigny, J. Miot, C. Rollion‐Bard, E. Muller, N. Drabon, D. Jacob, S. Pont, M. Robyr, T.R.R. Bontognali, C. François, S. Reynaud, M. Van Zuilen, P. Philippot, In Situ Fe and S isotope analyses in pyrite from the 3.2 Ga Mendon Formation (Barberton Greenstone Belt, South Africa): Evidence for early microbial iron reduction, Geobiology 18;3, 306-325 (2020), [doi: 10.1111/gbi.12385, LillOA]
  46. R. Alexander, L. Proville, C. Becquart, A.M. Goryeava, J. Dérès, C. Lapointe, M.-C. Marinica, Interatomic potentials for irradiation-induced defects in iron, Journal of Nuclear Materials 152141 (2020), [doi: 10.1016/j.jnucmat.2020.152141, LillOA]
  47. Z. Shen, G. Ji, J.-F. Silvain, From 1D to 2D arrangements of graphite flakes in an aluminium matrix composite: Impact on thermal properties, Scripta Materialia 86-90 (2020), [doi: 10.1016/j.scriptamat.2020.03.022, LillOA]
  48. F. Housaer, F. Vanni, M. Touzin, f. béclin, J. Allenou, A. Leenaers, A.M. Yacout, H. Palancher, B. Stepnik, O. Tougait, Morphological characterization of the fresh ZrN coated UMo powders used in EMPIrE irradiation experiment: A practical approach, Journal of Nuclear Materials 152087 (2020), [doi: 10.1016/j.jnucmat.2020.152087, LillOA]
  49. H. Idrissi, V. Samaee, G. Lumbeeck, T. Werf, T. Pardoen, D. Schryvers, P. Cordier, In Situ Quantitative Tensile Testing of Antigorite in a Transmission Electron Microscope, Journal of Geophysical Research: Solid Earth 125;3, e2019JB018383 (2020), [doi: 10.1029/2019jb018383, LillOA]
  50. J.-E. Potaufeux, J. Odent, D. Notta-Cuvier, R. Delille, S. Barrau, E.P. Giannelis, F. Lauro, J.-M. Raquez, Mechanistic insights on ultra-tough polylactide-based ionic nanocomposites, Composites Science and Technology 108075 (2020), [doi: 10.1016/j.compscitech.2020.108075, LillOA]
  51. J.-B. Vogt, I. Costa, A. Addad, J. Bouquerel, Fatigue intrusion-extrusion in a fully pearlitic steel, Materials Letters 127539 (2020), [doi: 10.1016/j.matlet.2020.127539, LillOA]
  52. J.-H. Zhai, P. Hirel, P. Carrez, Atomic-scale properties of jogs along 1/2〈110〉{1¯10} edge dislocations in MgO, Scripta Materialia 181, 66-69 (2020), [doi: 10.1016/j.scriptamat.2020.02.013, LillOA]
  53. R. Delon, S. Demouchy, Y. Marrocchi, M.A. Bouhifd, J. Gasc, P. Cordier, S. Koizumi, P.G. Burnard, Effect of deformation on helium storage and diffusion in polycrystalline forsterite, Geochimica et Cosmochimica Acta 273, 226-243 (2020), [doi: 10.1016/j.gca.2020.01.018, LillOA]
  54. Z. Jing, T. Yu, M. Xu, J. Chantel, Y. Wang, High-Pressure Sound Velocity Measurements of Liquids Using In Situ Ultrasonic Techniques in a Multianvil Apparatus, Minerals 10;2, 126 (2020), [doi: 10.3390/min10020126, LillOA]
  55. I. Proriol Serre, J.-B. Vogt, Liquid metal embrittlement sensitivity of the T91 steel in lead, in bismuth and in lead-bismuth eutectic, Journal of Nuclear Materials 152021 (2020), [doi: 10.1016/j.jnucmat.2020.152021, LillOA]
  56. M. Guerain, P. Derollez, L.-V. Roca Paixao, C. Dejoie, N. T. Correia, F. Affouard, Structure determination of Carbamazepine/DL-TA co-crystal by synchrotron powder X-ray diffraction, Acta Crystallographica Section C Structural Chemistry 76, (2020), [LillOA]
  57. C. Nguyen Thai, S. Barrau, M. Dufay, N. Tabary, A. Da Costa, A. Ferri, R. Lazzaroni, J.-M. Raquez, P. Leclere, On the Nanoscale Mapping of the Mechanical and Piezoelectric Properties of Poly (L-Lactic Acid) Electrospun Nanofibers, Applied Sciences 10;2, 652 (2020), [doi: 10.3390/app10020652, LillOA]
  58. B.C. Nzogang, M. Thieme, A. Mussi, S. Demouchy, P. Cordier, Characterization of recovery onset by subgrain and grain boundary migration in experimentally deformed polycrystalline olivine, European Journal of Mineralogy 32;1, 13-26 (2020), [doi: 10.5194/ejm-32-13-2020, LillOA]
  59. M.L. Montero-Sistiaga, Z. Liu, L. Bautmans, G. Ji, S. Nardone, J.-P. Kruth, J. Van Humbeeck, K. Vanmeensel, Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser melting, Additive Manufacturing 100995 (2020), [doi: 10.1016/j.addma.2019.100995, LillOA]
UMET - Unité Matériaux et Transformations
Université de Lille
Bâtiment C6
59655 Villeneuve d'Ascq
Version 2.0
Mentions Légales - Contacter le webmaster