Français - English
Unité Matériaux et Transformations

Unité Matériaux et Transformations
CNRS UMR 8207 - Université Lille 1

Directeur : Alexandre Legris

Directeur adjoint : Patrice Woisel

Secrétariat Tél : +33 (0) 320 43 49 67
Fax : + 33 (0) 320 43 65 91

Publications de l'UMET

Auteurs () Entre et
Grouper par revues
2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - toutes
  1. F. Auger, C. André, L. Bouvier, A. Redl, M. H. Morel, G. Delaplace, Power Requirement for Mixing Shear-Thinning Fluids with a Planetary Mixer, Chemical Engineering & Technology 38 1543-1549 (2015) [doi: 10.1002/ceat.201400345]
  2. L. Bouillaut, T. Dubois, A. L. Sonenshein, B. Dupuy, Integration of metabolism and virulence in Clostridium difficile, Research in Microbiology 166 375-383 (2015) [doi: 10.1016/j.resmic.2014.10.002]
  3. M. Monot, C. Eckert, A. Lemire, A. Hamiot, T. Dubois, C. Tessier, B. Dumoulard, B. Hamel, A. Petit, V. Lalande, L. Ma, C. Bouchier, F. Barbut, B. Dupuy, Clostridium difficile: New Insights into the Evolution of the Pathogenicity Locus, Scientific Reports 5 15023 (2015) [doi: 10.1038/srep15023]
  4. A. Bouchoux, S. Huet, M. N. Madec, D. Thomas, J. Floury, G. G. Guiziou, Peres, Diffusion and partitioning of macromolecules in casein microgels: evidence for size-dependent attractive interactions in a dense protein system, Langmuir 31 (5), 1755-1765. (2015)
  5. Y. Rokni, Ghabbour, Chihib, P. Thonart, Asehraou, Physico-chemical and microbiological characterization of the natural fermentation of Moroccan picholine green olives variety, Journal of Materials and Environmental Science 6 1740-1751 (2015)
  6. J. Ribis, E. Bordas, P. Trocellier, Y. Serruys, Y. De carlan, A. Legris, Radiation-sustained nanocluster metastability in oxide dispersion strengthened materials, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 365 22-25 (2015) [doi: 10.1016/j.nimb.2015.07.062]
  7. J. Ribis, E. Bordas, P. Trocellier, Y. Serruys, Y. De carlan, A. Legris, Radiation-sustained nanocluster metastability in oxide dispersion strengthened materials, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 365 22-25 (2015) [doi: 10.1016/j.nimb.2015.07.062]
  8. C. Schayes, J. B. Vogt, J. Bouquerel, F. Palleschi, Rotor Design Optimisation through Low Cycle Fatigue Testing, Procedia Engineering 133 233-243 (2015) [doi: 10.1016/j.proeng.2015.12.663]
  9. M. Descamps, A. Aumelas, S. Desprez, J. F. Willart, The amorphous state of pharmaceuticals obtained or transformed by milling: Sub-Tg features and rejuvenation, Journal of Non-Crystalline Solids 407 72-80 (2015) [doi: 10.1016/j.jnoncrysol.2014.08.055]
  10. H. Gasmi, J. F. Willart, F. Danede, M. C. Hamoudi, J. Siepmann, F. Siepmann, Importance of PLGA microparticle swelling for the control of prilocaine release, Journal of Drug Delivery Science and Technology 30 123-132 (2015) [doi: 10.1016/j.jddst.2015.10.009]
  11. M. S. Nieto-bobadilla, F. Siepmann, M. Djouina, L. Dubuquoy, N. Tesse, J. F. Willart, L. Dubreuil, J. Siepmann, C. Neut, Controlled delivery of a new broad spectrum antibacterial agent against colitis: In vitro and in vivo performance, European Journal of Pharmaceutics and Biopharmaceutics 96 152-161 (2015) [doi: 10.1016/j.ejpb.2015.07.012]
  12. A. K. Vynckier, H. Lin, J. A. Zeitler, J. F. Willart, E. Bongaers, J. Voorspoels, J. P. Remon, C. Vervaet, Calendering as a direct shaping tool for the continuous production of fixed-dose combination products via co-extrusion, European Journal of Pharmaceutics and Biopharmaceutics 96 125-131 (2015) [doi: 10.1016/j.ejpb.2015.07.023]
  13. M. H. Staia, E. S. Puchi cabrera, A. Iost, A. Zairi, S. Bellayer, G. A. Van, Tribological response of AA 2024-T3 aluminium alloy coated with a DLC duplex coating, Tribology International 85 74-87 (2015) [doi: 10.1016/j.triboint.2014.12.007]
  14. F. Roussel, R. Chen yu king, M. Kuriakose, M. Depriester, A. Hadj-sahraoui, C. Gors, A. Addad, J. F. Brun, Electrical and thermal transport properties of polyaniline/silver composites and their use as thermoelectric materials, Synthetic Metals 199 196-204 (2015) [doi: 10.1016/j.synthmet.2014.11.020]
  15. R. Islam, A. N. Papathanassiou, R. Chan yu king, J. F. Brun, F. Roussel, Evidence of interfacial charge trapping mechanism in polyaniline/reduced graphene oxide nanocomposites, Applied Physics Letters 107 053102 (2015) [doi: 10.1063/1.4927591]
  16. Y. Jallouli, J. F. Willart, F. Siepmann, M. Descamps, F. Danede, J. Siepmann, Preparation of polymeric fenofibrate formulations with accelerated drug release: Solvent evaporation versus co-grinding, Journal of Drug Delivery Science and Technology 30 397-407 (2015) [doi: 10.1016/j.jddst.2015.07.013]
  17. E. Elisei, M. Filibian, P. Carretta, S. Colombo serra, F. Tedoldi, J. F. Willart, M. Descamps, A. Cesàro, Dynamic nuclear polarization of a glassy matrix prepared by solid state mechanochemical amorphization of crystalline substances, Chemical Communications 51 2080-2083 (2015) [doi: 10.1039/C4CC08348B]
  18. F. Dubois, Y. Derouiche, J. M. Leblond, U. Maschke, R. Douali, Compensated Arrhenius formalism applied to a conductivity study in poly(propylene glycol) diacrylate monomers, Physical Review E 92 032601 (2015) [doi: 10.1103/PhysRevE.92.032601]
  19. T. T. Phan, F. Bentiss, C. Jama, Structural and anticorrosion performance characterization of phosphosilicate sol–gel coatings prepared from 3-(trimethoxysilyl) propyl methacrylate and bis[2-(methacryloyloxy)ethyl] phosphate, Progress in Organic Coatings 89 123-131 (2015) [doi: 10.1016/j.porgcoat.2015.08.011]
  20. K. Anoukou, A. Zaoui, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, Structural and thermodynamics properties of organo-modified montmorillonite clay, Physica E: Low-dimensional Systems and Nanostructures 65 56-60 (2015) [doi: 10.1016/j.physe.2014.07.025]
  21. J. Alongi, F. Cuttica, S. Bourbigot, G. Malucelli, Thermal and flame retardant properties of ethylene vinyl acetate copolymers containing deoxyribose nucleic acid or ammonium polyphosphate, Journal of thermal analysis and calorimetry (2015) [doi: DOI: 10.1007/s10973-015-4808-5]
  22. J. Alongi, F. Cuttica, F. Carosio, S. Bourbigot, How much the fabric grammage may affect cotton combustion?, Cellulose 22 3477-3489 (2015) [doi: DOI: 10.1007/s10570-015-0717-9]
  23. J. Alongi, Z. Han, S. Bourbigot, Intumescence: Tradition versus novelty. A comprehensive review, Progress in Polymer Science (2015) [doi: DOI: 10.1016/j.progpolymsci.2015.04.010]
  24. R. Crétois, N. Follain, E. Dargent, J. Soulestin, S. Bourbigot, S. Marais, L. Lebrun, Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) based nanocomposites: Influence of the microstructure on the barrier properties, Physical Chemistry Chemical Physics 17 11313-11323 (2015) [doi: DOI: 10.1039/c4cp05524a]
  25. R. Dupretz, G. Fontaine, S. Duquesne, S. Bourbigot, Instrumentation of UL-94 test: understanding of mechanisms involved in fire retardancy of polymers, Polymers for Advanced Technologies 26 865-873 (2015) [doi: DOI: 10.1002/pat.3507]
  26. B. Girardin, G. Fontaine, S. Duquesne, M. Försth, S. Bourbigot, Characterization of thermo-physical properties of EVA/ATH: Application to gasification experiments and pyrolysis modeling, Materials 8 7837-7863 (2015) [doi: DOI: 10.3390/ma8115428]
  27. R. Heidar-pour, M. Soheilmoghaddam, A. Hassan, S. Bourbigot, Flammability and thermal properties of polycarbonate /acrylonitrile-butadiene-styrene nanocomposites reinforced with multilayer graphene, Polymer Degradation and Stability 120 88-97 (2015) [doi: DOI: 10.1016/j.polymdegradstab.2015.06.013]
  28. P. Jiang, X. Gu, S. Zhang, J. Sun, R. Xu, S. Bourbigot, S. Duquesne, M. Casetta, Flammability and thermal degradation of poly (lactic acid)/polycarbonate alloys containing a phosphazene derivative and trisilanollsobutyl POSS, Polymer (United Kingdom) 79 221-231 (2015) [doi: DOI: 10.1016/j.polymer.2015.10.029]
  29. B. K. Kandola, P. Luangtriratana, S. Duquesne, S. Bourbigot, The effects of thermophysical properties and environmental conditions on fire performance of intumescent coatings on glass fibre-reinforced epoxy composites, Materials 8 5216-5237 (2015) [doi: DOI: 10.3390/ma8085216]
  30. B. Rimez, H. Rahier, M. Biesemans, S. Bourbigot, B. Vanmele, Flame retardancy and degradation mechanism of poly(vinyl acetate) in combination with intumescent flame retardants: I. Ammonium poly(phosphate), Polymer Degradation and Stability 121 321-330 (2015) [doi: DOI: 10.1016/j.polymdegradstab.2015.09.024]
  31. J. Liu, Q. K. Xia, E. Deloule, J. Ingrin, H. Chen, M. Feng, Water Content and Oxygen Isotopic Composition of Alkali Basalts from the Taihang Mountains, China: Recycled Oceanic Components in the Mantle Source, Journal of Petrology 56 681-702 (2015) [doi: 10.1093/petrology/egv013]
  32. F. Carosio, G. Fontaine, J. Alongi, S. Bourbigot, Starch-Based Layer by Layer Assembly: Efficient and Sustainable Approach to Cotton Fire Protection, ACS Applied Materials & Interfaces 7(22) 12158-12167 (2015) [doi: 10.1021/acsami.5b02507]
  33. A. D. Naik, G. Fontaine, S. Bellayer, S. Bourbigot, Crossing the Traditional Boundaries: Salen-Based Schiff Bases for Thermal Protective Applications, ACS Applied Materials & Interfaces 7(38) 21208-21217 (2015) [doi: 10.1021/acsami.5b05164]
  34. P. Hirel, A. F. Mark, M. Castillo-rodriguez, W. Sigle, M. Mrovec, C. Elsässer, Theoretical and experimental study of the core structure and mobility of dislocations and their influence on the ferroelectric polarization in perovskite KNbO3, Physical Review B 92 (2015) [doi: 10.1103/PhysRevB.92.214101]
  35. P. Hirel, Atomsk: A tool for manipulating and converting atomic data files, Computer Physics Communications 197 212-219 (2015) [doi: 10.1016/j.cpc.2015.07.012]
  36. H. Chen, Q. K. Xia, J. Ingrin, Z. B. Jia, M. Feng, Changing recycled oceanic components in the mantle source of the Shuangliao Cenozoic basalts, NE China: New constraints from water content, Tectonophysics 650 113-123 (2015) [doi: 10.1016/j.tecto.2014.07.022]
  37. L. Palatinus, C. A. Corrêa, G. Steciuk, D. Jacob, P. Roussel, P. Boullay, M. Klementová, M. Gemmi, J. Kopeček, M. C. Domeneghetti, F. Cámara, V. Petříček, Structure refinement using precession electron diffraction tomography and dynamical diffraction: tests on experimental data, Acta Crystallographica Section B Structural Science, Crystal Engineering and Materials 71 740-751 (2015) [doi: 10.1107/S2052520615017023]
  38. E. A. Hodille, X. Bonnin, R. Bisson, T. Angot, C. S. Becquart, J. M. Layet, C. Grisolia, Macroscopic rate equation modeling of trapping/detrapping of hydrogen isotopes in tungsten materials, Journal of Nuclear Materials 467 424-431 (2015) [doi: 10.1016/j.jnucmat.2015.06.041]
  39. J. P. Lorand, R. H. Hewins, L. Remusat, B. Zanda, S. Pont, H. Leroux, M. Marinova, D. Jacob, M. Humayun, A. Nemchin, M. Grange, A. Kennedy, C. Göpel, Nickeliferous pyrite tracks pervasive hydrothermal alteration in Martian regolith breccia: A study in NWA 7533, Meteoritics & Planetary Science 2099-2120 (2015) [doi: 10.1111/maps.12565]
  40. A. Hédoux, L. Paccou, P. Derollez, Y. Guinet, Dehydration mechanism of caffeine hydrate and structural description of driven metastable anhydrates analyzed by micro Raman spectroscopy, International Journal of Pharmaceutics 486 331-338 (2015) [doi: 10.1016/j.ijpharm.2015.04.001]
  41. G. Serghiou, G. Ji, N. Odling, H. J. Reichmann, J. P. Morniroli, R. Boehler, D. J. Frost, J. P. Wright, B. Wunder, Creating Reactivity with Unstable Endmembers using Pressure and Temperature: Synthesis of Bulk Cubic Mg0.4Fe0.6N, Angewandte Chemie International Edition 54 15109-15112 (2015) [doi: 10.1002/anie.201506257]
  42. A. Mussi, M. Nafi, S. Demouchy, P. Cordier, On the deformation mechanism of olivine single crystals at lithospheric temperatures: an electron tomography study, European Journal of Mineralogy 27 707-715 (2015) [doi: 10.1127/ejm/2015/0027-2481]
  43. A. De backer, G. Adjanor, C. Domain, M. L. Lescoat, S. Jublot-leclerc, F. Fortuna, A. Gentils, C. J. Ortiz, A. Souidi, C. S. Becquart, Modeling of helium bubble nucleation and growth in austenitic stainless steels using an Object Kinetic Monte Carlo method, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 352 107-114 (2015) [doi: 10.1016/j.nimb.2014.11.110]
  44. M. T. Ottou abe, N. T. Correia, J. M. B. Ndjaka, F. Affouard, A comparative study of ibuprofen and ketoprofen glass-forming liquids by molecular dynamics simulations, The Journal of Chemical Physics 143 164506 (2015) [doi: 10.1063/1.4933430]
  45. A. M. Goryaeva, P. Carrez, P. Cordier, Modeling defects and plasticity in MgSiO3 post-perovskite: Part 2—screw and edge [100] dislocations, Physics and Chemistry of Minerals 42 793-803 (2015) [doi: 10.1007/s00269-015-0763-8]
  46. A. M. Goryaeva, P. Carrez, P. Cordier, Modeling defects and plasticity in MgSiO3 post-perovskite: Part 1—generalized stacking faults, Physics and Chemistry of Minerals 42 781-792 (2015) [doi: 10.1007/s00269-015-0762-9]
  47. G. Stoclet, G. Gobius du sart, B. Yeniad, S. De vos, J. M. Lefebvre, Isothermal crystallization and structural characterization of poly(ethylene-2,5-furanoate), Polymer 72 165-176 (2015) [doi: 10.1016/j.polymer.2015.07.014]
  48. C. Pirez, G. Stoclet, T. Lebarbé, S. Desset, F. Dumeignil, B. Katryniok, Synthesis and application of fatty acid derived templates for the preparation of mesostructured silica material, RSC Advances 5 82488-82491 (2015) [doi: 10.1039/C5RA19495D]
  49. F. Boioli, A. Tommasi, P. Cordier, S. Demouchy, A. Mussi, Low steady-state stresses in the cold lithospheric mantle inferred from dislocation dynamics models of dislocation creep in olivine, Earth and Planetary Science Letters 432 232-242 (2015) [doi: 10.1016/j.epsl.2015.10.012]
  50. V. Panwar, A. Al-nafiey, A. Addad, B. Sieber, P. Roussel, R. Boukherroub, S. L. Jain, Magnetic Co 3 O 4 /reduced graphene oxide nanocomposite as a superior heterogeneous catalyst for one-pot oxidative esterification of aldehydes to methyl esters, RSC Advances 5 88567-88573 (2015) [doi: 10.1039/C5RA14665H]
  51. M. Ben ali, F. Barka-bouaifel, H. Elhouichet, B. Sieber, A. Addad, L. Boussekey, M. Férid, R. Boukherroub, Hydrothermal synthesis, phase structure, optical and photocatalytic properties of Zn2SnO4 nanoparticles, Journal of Colloid and Interface Science 457 360-369 (2015) [doi: 10.1016/j.jcis.2015.07.015]
  52. N. Labjar, M. Lebrini, C. Jama, F. Bentiss, M. S. Idrissi, S. E. Hajjaji, Evaluation of the inhibitor synergetic effect of aminotris (methylenephosphonic) acid and metallic salts on the corrosion of iron in acidic medium, Journal of Materials and Environmental Science 6 2604-2611 (2015)
  53. D. Puglia, E. Fortunati, D. A. D’amico, V. Miri, G. Stoclet, L. B. Manfredi, V. P. Cyras, J. M. Kenny, Influence of Processing Conditions on Morphological, Thermal and Degradative Behavior of Nanocomposites Based on Plasticized Poly(3-hydroxybutyrate) and Organo-Modified Clay, Journal of Polymers and the Environment (2015) [doi: 10.1007/s10924-015-0744-5]
  54. F. Housaer, F. Beclin, M. Touzin, D. Tingaud, A. Legris, A. Addad, Interfacial characterization in carbon nanotube reinforced aluminum matrix composites, Materials Characterization 110 94-101 (2015) [doi: 10.1016/j.matchar.2015.10.014]
  55. S. Ritterbex, P. Carrez, K. Gouriet, P. Cordier, Modeling dislocation glide in Mg2SiO4 ringwoodite: Towards rheology under transition zone conditions, Physics of the Earth and Planetary Interiors 248 20-29 (2015) [doi: 10.1016/j.pepi.2015.09.001]
  56. K. Gouriet, N. Hilairet, E. Amiguet, N. Bolfan-casanova, Y. Wang, B. Reynard, P. Cordier, Plasticity of the dense hydrous magnesium silicate phase A at subduction zones conditions, Physics of the Earth and Planetary Interiors 248 1-11 (2015) [doi: 10.1016/j.pepi.2015.09.004]
  57. A. Anghelus, M. N. Avettand-fènoël, C. Cordier, R. Taillard, Thermal crystallization of an Al88Ni6Sm6 metallic glass, Journal of Alloys and Compounds 651 454-464 (2015) [doi: 10.1016/j.jallcom.2015.08.102]
  58. Z. Chen, J. Li, A. Borbely, G. Ji, S. Y. Zhong, Y. Wu, M. L. Wang, H. W. Wang, The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing, Materials & Design 88 999-1007 (2015) [doi: 10.1016/j.matdes.2015.09.127]
  59. M. T. Viciosa, G. Santos, A. Costa, F. Danède, L. C. Branco, N. Jordão, N. T. Correia, M. Dionísio, Dipolar motions and ionic conduction in an ibuprofen derived ionic liquid, Physical Chemistry Chemical Physics 17 24108-24120 (2015) [doi: 10.1039/C5CP03715H]
  60. P. Tranchard, F. Samyn, S. Duquesne, M. Thomas, B. Estèbe, J. L. Montès, S. Bourbigot, Fire behaviour of carbon fibre epoxy composite for aircraft: Novel test bench and experimental study, Journal of Fire Sciences 33 247-266 (2015) [doi: doi:10.1177/0734904115584093]
  61. H. Leroux, P. Cuvillier, B. Zanda, R. H. Hewins, GEMS-like material in the matrix of the Paris meteorite and the early stages of alteration of CM chondrites, Geochimica et Cosmochimica Acta 170 247-265 (2015) [doi: 10.1016/j.gca.2015.09.019]
  62. P. Cuvillier, H. Leroux, D. Jacob, P. Hirel, Fe-Mg interdiffusion profiles in rimmed forsterite grains in the Allende matrix: Time–temperature constraints for the parent body metamorphism, Meteoritics & Planetary Science 50 1529-1545 (2015) [doi: 10.1111/maps.12493]
  63. B. Laurent, M. Roskosz, L. Remusat, F. Robert, H. Leroux, H. Vezin, C. Depecker, N. Nuns, J. M. Lefebvre, The deuterium/hydrogen distribution in chondritic organic matter attests to early ionizing irradiation, Nature Communications 6 8567 (2015) [doi: 10.1038/ncomms9567]
  64. N. El hamdani, R. Fdil, M. Tourabi, C. Jama, F. Bentiss, Alkaloids extract of Retama monosperma (L.) Boiss. seeds used as novel eco-friendly inhibitor for carbon steel corrosion in 1 M HCl solution: Electrochemical and surface studies, Applied Surface Science 357 1294-1305 (2015) [doi: 10.1016/j.apsusc.2015.09.159]
  65. S. Radi, S. Tighadouini, M. El massaoudi, M. Bacquet, S. Degoutin, B. Revel, Y. N. Mabkhot, Thermodynamics and Kinetics of Heavy Metals Adsorption on Silica Particles Chemically Modified by Conjugated β-Ketoenol Furan, Journal of Chemical & Engineering Data In press (2015) [doi: 10.1021/acs.jced.5b00281]
  66. M. Jimenez, N. Lesaffre, S. Bellayer, R. Dupretz, M. Vandenbossche, S. Duquesne, S. Bourbigot, Novel flame retardant flexible polyurethane foam: plasma induced graft-polymerization of phosphonates, RSC Advances 5 63853-63865 (2015) [doi: 10.1039/C5RA08289G]
  67. R. G. A. Veiga, H. Goldenstein, M. Perez, C. S. Becquart, Monte Carlo and molecular dynamics simulations of screw dislocation locking by Cottrell atmospheres in low carbon Fe–C alloys, Scripta Materialia 108 19-22 (2015) [doi: 10.1016/j.scriptamat.2015.06.012]
  68. A. D. Rosa, N. Hilairet, S. Ghosh, G. Garbarino, J. Jacobs, J. P. Perrillat, G. Vaughan, S. Merkel, In situ monitoring of phase transformation microstructures at Earth's mantle pressure and temperature using multi-grain XRD, Journal of Applied Crystallography 48 1346-1354 (2015) [doi: 10.1107/S1600576715012765]
  69. S. Davıðsdottir, J. Petit, R. Shabadi, S. Canulescu, K. Almtoft, K. Dirscher, I. Andersen, R. Ambat, Effect of interfacial oxide thickness on the photocatalytic activity of magnetron-sputtered TiO2 coatings on aluminum substrate, physica status solidi (a) 1-11 (2015) [doi: 10.1002/pssa.201532238]
  70. n. Laggoune, F. Delattre, J. Lyskawa, F. Stoffelbach, J. M. Guigner, S. Ruellan, G. Cooke, P. Woisel, Synthesis, binding and self-assembly properties of a well-defined Pillar[5]arene End Functionalised polydimethylacrylamide, Polymer Chemistry 6 7389-7394 (2015) [doi: 10.1039/C5PY01186H]
  71. K. Gouriet, P. Carrez, P. Cordier, A. Guitton, A. Joulain, L. Thilly, C. Tromas, Dislocation modelling in Ti2AlN MAX phase based on the Peierls-Nabarro model, Philosophical Magazine 95 2539-2552 (2015) [doi: 10.1080/14786435.2015.1066938]
  72. P. G. Burnard, S. Demouchy, R. Delon, N. Arnaud, Y. Marrocchi, P. Cordier, A. Addad, The role of grain boundaries in the storage and transport of noble gases in the mantle, Earth and Planetary Science Letters 430 260-270 (2015) [doi: 10.1016/j.epsl.2015.08.024]
  73. J. Gerges, F. Affouard, Predictive Calculation of the Crystallization Tendency of Model Pharmaceuticals in the Supercooled State from Molecular Dynamics Simulations, The Journal of Physical Chemistry B 119 10768-10783 (2015) [doi: 10.1021/acs.jpcb.5b05557]
  74. T. T. Phan, F. Bentiss, C. Jama, Structural and anticorrosion performance characterization of phosphosilicate sol-gel coatings prepared from 3-(trimethoxysilyl)propyl methacrylate and bis-[2-(methacryloyloxy)ethyl] phosphate, Progress in Organic Coatings 89 123–131 (2015) [doi: 10.1016/j.porgcoat.2015.08.011]
  75. H. Bouammali, C. Jama, K. Bekkouch, A. Aouniti, B. Hammouti, F. Bentiss, Anticorrosion potential of diethylenetriaminepentakis (methylphosphonic) acid on carbon steel in hydrochloric acid solution, Journal of Industrial and Engineering Chemistry 26 270-276 (2015) [doi: 10.1016/j.jiec.2014.11.039]
  76. K. Boumhara, M. Tabyaoui, C. Jama, F. Bentiss, Artemisia Mesatlantica essential oil as green inhibitor for carbon steel corrosion in 1M HCl solution: Electrochemical and XPS investigations, Journal of Industrial and Engineering Chemistry 29 146-155 (2015) [doi: 10.1016/j.jiec.2015.03.028]
  77. G. E. Tiznado-orozco, J. Reyes-gasga, F. Elefterie, C. Beyens, U. Maschke, E. Brès, Wettability modification of human tooth surface by water and UV and electron-beam radiation, Materials Science and Engineering: C 57 133-146 (2015) [doi: 10.1016/j.msec.2015.06.054]
  78. M. Bouchakour, Y. Derouiche, Z. Bouberka, C. Beyens, L. Mechernene, F. Riahi, U. Maschke, Optical properties of electron beam- and UV-cured polypropylene-glycoldiacrylate/liquid crystal E7 systems, Liquid Crystals 1-10 (2015) [doi: 10.1080/02678292.2015.1044579]
  79. O. Belaidi, M. Adjim, T. Bouchaour, U. Maschke, FT-IR and FT-Raman spectra of 2-hydroxyethyl methacrylate – A conformational and vibrational analysis, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 148 396-404 (2015) [doi: 10.1016/j.saa.2015.03.101]
  80. R. Y. Morjan, N. H. Al-attar, O. S. Abu-teim, U. Maschke, A. M. Awadallah, A. M. Mkadmh, A. A. Elmanama, J. Raftery, F. M. Abu-awwad, Z. J. Yaseen, A. F. Elqidrea, J. M. Gardiner, Synthesis, antibacterial and QSAR evaluation of 5-oxo and 5-thio derivatives of 1,4-disubstituted tetrazoles, Bioorganic & Medicinal Chemistry Letters 25 4024-4028 (2015) [doi: 10.1016/j.bmcl.2015.04.070]
  81. A. Nadim, Z. Bouberka, Y. Agguine, S. Eddarir, U. Maschke, Abatement of polybrominated molecules by various radiative methods, Encyclopedia of Analytical Chemistry Article sur invitation (2015) [doi: 10.1002/9780470027318]
  82. O. Belaidi, M. Adjim, T. Bouchaour, U. Maschke, MM and QM: Conformational and vibrational spectra analysis of 2- hydroxyethyl acrylate, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 137 50-57 (2015) [doi: 10.1016/j.saa.2014.08.001]
  83. F. Detrez, O. Castelnau, P. Cordier, S. Merkel, P. Raterron, Effective viscoplastic behavior of polycrystalline aggregates lacking four independent slip systems inferred from homogenization methods; application to olivine, Journal of the Mechanics and Physics of Solids 83 199-220 (2015) [doi: 10.1016/j.jmps.2015.05.022]
  84. V. Baptiste, S. Demouchy, S. Keshav, F. Parat, N. Bolfan-casanova, P. Condamine, P. Cordier, Decrease of hydrogen incorporation in forsterite from CO2-H2O-rich kimberlitic liquid, American Mineralogist 100 1912-1920 (2015) [doi: 10.2138/am-2015-5200]
  85. F. Boioli, P. Carrez, P. Cordier, B. Devincre, M. Marquille, Modeling the creep properties of olivine by 2.5-dimensional dislocation dynamics simulations, Physical Review B 92(1) 014115 (2015) [doi: 10.1103/PhysRevB.92.014115]
  86. M. Chiapetto, L. Malerba, C. S. Becquart, Effect of Cr content on the nanostructural evolution of irradiated ferritic/martensitic alloys: An object kinetic Monte Carlo model, Journal of Nuclear Materials 465 326-336 (2015) [doi: 10.1016/j.jnucmat.2015.06.012]
  87. L. Cheng, G. De temmerman, P. A. Zeijlmans van emmichoven, G. Ji, H. B. Zhou, B. Wang, Y. Yuan, Y. Zhang, G. H. Lu, Effect of neon plasma pre-irradiation on surface morphology and deuterium retention of tungsten, Journal of Nuclear Materials 463 1025-1028 (2015) [doi: 10.1016/j.jnucmat.2014.11.110]
  88. J. Bardon, K. Apaydin, A. Laachachi, M. Jimenez, T. Fouquet, F. Hilt, S. Bourbigot, D. Ruch, Characterization of a plasma polymer coating from an organophosphorus silane deposited at atmospheric pressure for fire-retardant purposes, Progress in Organic Coatings 88 39-47 (2015) [doi: doi:10.1016/j.porgcoat.2015.06.005]
  89. Z. Chen, Z. Tan, G. Ji, G. Fan, D. Schryvers, Q. Ouyang, Z. Li, Effect of Interface Evolution on Thermal Conductivity of Vacuum Hot Pressed SiC/Al Composites, Advanced Engineering Materials 17 1076-1084 (2015) [doi: 10.1002/adem.201400412]
  90. P. Zhang, J. Ingrin, C. Depecker, Q. Xia, Kinetics of deuteration in andradite and garnet, American Mineralogist 100 1400-1410 (2015) [doi: 10.2138/am-2015-5149]
  91. H. Awada, L. Mezzasalma, S. Blanc, D. Flahaut, C. Dagron-lartigau, J. Lyskawa, P. Woisel, A. Bousquet, L. Billon, Biomimetic Mussel Adhesive Inspired Anchor to Design ZnO@Poly(3-Hexylthiophene) Hybrid Core@Corona Nanoparticles, Macromolecular Rapid Communications 36 1486–1491 (2015) [doi: 10.1002/marc.201500184]
  92. S. Merkel, N. Hilairet, Multifit-Polydefix: a framework for the analysis of polycrystal deformation using X-rays, Journal of Applied Crystallography 48 1307-1313 (2015) [doi: 10.1107/S1600576715010390]
  93. I. A. Kassaa, D. Hober, M. Hamze, D. Caloone, A. Dewilde, N. e. Chihib, D. Drider, Vaginal Lactobacillus gasseri CMUL57 can inhibit herpes simplex type 2 but not Coxsackievirus B4E2, Archives of Microbiology 197 657-664 (2015) [doi: 10.1007/s00203-015-1101-8]
  94. C. Hoffendahl, S. Duquesne, G. Fontaine, F. Taschner, M. Mezger, S. Bourbigot, The combination of aluminum trihydroxide (ATH) and melamine borate (MB) as fire retardant additives for elastomeric ethylene vinyl acetate (EVM)., Polymer Degradation and Stability 115 77-88 (2015) [doi: 10.1016/j.polymdegradstab.2015.03.001]
  95. F. E. Ngohang, G. Fontaine, L. Gay, S. Bourbigot, Smoke composition using MLC/FTIR/ELPI: Application to flame retarded ethylene vinyl acetate, Polymer Degradation and Stability 115 89-109 (2015) [doi: 10.1016/j.polymdegradstab.2015.03.002]
  96. F. Bonnet, F. Stoffelbach, G. Fontaine, S. Bourbigot, Continuous cyclo-polymerisation of L-lactide by reactive extrusion using atoxic metal-based catalysts: easy access to well-defined polylactide macrocycles, RSC Advances 5 31303-31310 (2015) [doi: 10.1039/C4RA16634E]
  97. D. Battegazzore, J. Alongi, G. Fontaine, A. Frache, S. Bourbigot, G. Malucelli, Bulk vs.surface flame retardancy of fully bio-based polyamide 10,10, RSC Advances 5 39424-39432 (2015) [doi: 10.1039/C5RA04149J]
  98. A. D. Naik, G. Fontaine, S. Bellayer, S. Bourbigot, Salen based Schiff bases to flame retard thermoplastic polyurethane mimicking operational strategies of thermosetting resin, RSC Advances 5 48224-48235 (2015) [doi: 10.1039/C5RA06242J]
  99. S. Degoutin, C. Saffre, D. Ruffin, M. Bacquet, B. Martel, Metallic Pollutant Removal in Leachates Extracted from Sediment by Geotextiles Based on Crosslinked Bio-Sourced Polymers, Revue des sciences de l'eau 28 43 (2015) [doi: 10.7202/1030006ar]
  100. S. Radi, S. Tighadouini, M. Bacquet, S. Degoutin, B. Revel, M. Zaghrioui, Quantitative removal of Zn(II) from aqueous solution and natural water using new silica-immobilized ketoenol–pyridine receptor, Journal of Environmental Chemical Engineering 3 1769-1778 (2015) [doi: 10.1016/j.jece.2015.06.016]
  101. K. Cheng, M. Virginie, V. V. Ordomsky, C. Cordier, P. A. Chernavskii, M. I. Ivantsov, S. Paul, Y. Wang, A. Y. Khodakov, Pore size effects in high-temperature Fischer–Tropsch synthesis over supported iron catalysts, Journal of Catalysis 328 139-150 (2015) [doi: 10.1016/j.jcat.2014.12.007]
  102. C. Alwmark, L. Ferriere, S. Holm-alwmark, J. Ormo, H. Leroux, E. Sturkell, Impact origin for the Hummeln structure (Sweden) and its link to the Ordovician disruption of the L chondrite parent body, Geology 43 279-282 (2015) [doi: 10.1130/G36429.1]
  103. A. Perez anes, M. Gargouri, W. Laure, H. Van den berghe, E. Courcot, J. Sobocinski, N. Tabary, F. Chai, J. F. Blach, A. Addad, P. Woisel, D. Douroumis, B. Martel, N. Blanchemain, J. Lyskawa, Bio-inspired Titanium Drug Eluting Platforms Based on Poly-β-cyclodextrin/chitosan Layer-by- Layer Self Assembly Targeting Infections, ACS Applied Materials & Interfaces 7 12882–12893 (2015) [doi: 10.1021/acsami.5b02402]
  104. S. Radi, A. Attayibat, M. El-massaoudi, M. Bacquet, S. Jodeh, I. Warad, S. S. Al-showiman, Y. N. Mabkhot, C,N-bipyrazole receptor grafted onto a porous silica surface as a novel adsorbent based polymer hybrid, Talanta 143 1-6 (2015) [doi: 10.1016/j.talanta.2015.04.060]
  105. A. Dewaele, C. Denoual, S. Anzellini, F. Occelli, M. Mezouar, P. Cordier, S. Merkel, M. Véron, E. Rausch, Mechanism of the α−ε phase transformation in iron, Physical Review B 91 (2015) [doi: 10.1103/PhysRevB.91.174105]
  106. N. Renaut, M. Jimenez, J. Dutroncy, M. Traisnel, High speed atmospheric plasma deposition of transparent ZnO thin films without post deposition annealing., Thin solid films 589 161-164 (2015) [doi: 10.1016/j.tsf.2015.05.008]
  107. M. Dehurtevent, E. Deveaux, J. C. Hornez, L. Robberecht, N. Tabary, F. Chai, Influence of heat and ultrasonic treatments on the setting and maturation of a glass-ionomer cement, American Journal of Dentistry 28 105-110 (2015)
  108. L. Pittarello, G. Ji, A. Yamaguchi, D. Schryvers, V. Debaille, P. Claeys, From olivine to ringwoodite: a TEM study of a complex process, Meteoritics & Planetary Science 50 944-957 (2015) [doi: 10.1111/maps.12441]
  109. M. Chiapetto, C. S. Becquart, C. Domain, L. Malerba, Nanostructure evolution under irradiation of Fe(C)MnNi model alloys for reactor pressure vessel steels, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 352 56-60 (2015) [doi: 10.1016/j.nimb.2014.11.102]
  110. A. Souidi, M. Hou, C. S. Becquart, C. Domain, A. De backer, Long term simulation of point defect cluster size distributions from atomic displacement cascades in Fe70Cr20Ni10, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 352 51-55 (2015) [doi: 10.1016/j.nimb.2014.11.114]
  111. Y. Song, C. A. Davy, D. Troadec, A. M. Blanchenet, F. Skoczylas, J. Talandier, J. C. Robinet, Multi-scale pore structure of COx claystone: Towards the prediction of fluid transport, Marine and Petroleum Geology 65 63-82 (2015) [doi: 10.1016/j.marpetgeo.2015.04.004]
  112. M. Chiapetto, C. S. Becquart, C. Domain, L. Malerba, Kinetic Monte Carlo simulation of nanostructural evolution under post-irradiation annealing in dilute FeMnNi, physica status solidi (c) 12 20-24 (2015) [doi: 10.1002/pssc.201400143]
  113. M. Chiapetto, L. Malerba, C. S. Becquart, Nanostructure evolution under irradiation in FeMnNi alloys: A “grey alloy” object kinetic Monte Carlo model, Journal of Nuclear Materials 462 91-99 (2015) [doi: 10.1016/j.jnucmat.2015.03.045]
  114. P. Carrez, J. Godet, P. Cordier, Atomistic simulations of ½〈110〉 screw dislocation core in magnesium oxide, Computational Materials Science 103 250-255 (2015) [doi: 10.1016/j.commatsci.2014.10.019]
  115. P. Cordier, News & Views: Strength under pressure, Nature Geoscience 8 255-256 (2015) [doi: 10.1038/ngeo2402]
  116. A. Zaki, J. Xu, G. Stoclet, S. Casale, J. P. Dacquin, P. Granger, Tunable hierarchical porous silica materials using hydrothermal sedimentation-aggregation technique, Microporous and Mesoporous Materials 208 140-151 (2015) [doi: 10.1016/j.micromeso.2015.01.041]
  117. A. C. Phan, P. Béhin, G. Stoclet, N. Dorin ruse, J. F. Nguyen, M. Sadoun, Optimum pressure for the high-pressure polymerization of urethane dimethacrylate, Dental Materials 31 406-412 (2015) [doi: 10.1016/]
  118. S. Ouchiar, G. Stoclet, C. Cabaret, E. Georges, A. Smith, C. Martias, A. Addad, V. Gloaguen, Comparison of the influence of talc and kaolinite as inorganic fillers on morphology, structure and thermomechanical properties of polylactide based composites, Applied Clay Science (2015) [doi: 10.1016/j.clay.2015.03.020]
  119. A. Elmaleh, F. Bourdelle, F. Caste, K. Benzerara, H. Leroux, B. Devouard, Formation and transformations of Fe-rich serpentines by asteroidal aqueous alteration processes: A nanoscale study of the Murray chondrite, Geochimica et Cosmochimica Acta 158 162-178 (2015) [doi: 10.1016/j.gca.2015.03.007]
  120. S. Bellayer, M. Jimenez, B. Gardelle, G. Delaplace, J. Bouquerel, S. Duquesne, S. Bourbigot, The electron microanalyzer (EPMA): a powerful device for the microanalysis of filled polymeric materials, Polymers for Advanced Technologies (2015) [doi: 10.1002/pat.3523]
  121. J. Alongi, A. D. Blasio, J. Milnes, G. Malucelli, S. Bourbigot, B. Kandola, G. Camino, THERMAL DEGRADATION OF DNA, AN ALL-IN-ONE NATURAL INTUMESCENT FLAME RETARDANT, Polymer Degradation and Stability 113 110-118 (2015) [doi:]
  122. A. Witkowski, B. Girardin, M. Försth, F. Hewitt, G. Fontaine, S. Duquesne, S. Bourbigot, T. R. Hull, DEVELOPMENT OF AN ANAEROBIC PYROLYSIS MODEL FOR FIRE RETARDANT CABLE SHEATHING MATERIALS, Polymer Degradation and Stability 113 208-217 (2015) [doi:]
  123. C. Hoffendahl, G. Fontaine, S. Duquesne, F. Taschner, M. Mezger, S. Bourbigot, DECOMPOSITION MECHANISM OF FIRE RETARDED ETHYLENE VINYL ACETATE ELASTOMER (EVA) CONTAINING ALUMINUM TRIHYDROXIDE AND MELAMINE, Polymer Degradation and Stability 113 168-179 (2015) [doi:]
  124. J. Amodeo, B. S. A. Schuberth, H. P. Bunge, P. Carrez, P. Cordier, On the role of thermal heterogeneities on the rheology of MgO under conditions of the Earth’s lower mantle, Physics of the Earth and Planetary Interiors 242 1-8 (2015) [doi: 10.1016/j.pepi.2015.02.008]
  125. J. Junthip, N. Tabary, L. Leclercq, B. Martel, Cationic β-cyclodextrin polymer applied to a dual cyclodextrin polyelectrolyte multilayer system, Carbohydrate Polymers 126 156-167 (2015) [doi: 10.1016/j.carbpol.2015.02.064]
  126. R. Herbois, S. Noël, B. Léger, S. Tilloy, S. Menuel, A. Addad, B. Martel, A. Ponchelab, E. Monflier, Ruthenium-containing β-cyclodextrin polymer globules for the catalytic hydrogenation of biomass-derived furanic compounds, Green Chemistry (2015) [doi: 10.1039/C5GC00005J]
  127. M. Blanchard, N. Dauphas, M. Y. Hu, M. Roskosz, E. E. Alp, D. C. Golden, C. K. Sio, F. L. H. Tissot, J. Zhao, L. Gao, R. V. Morris, M. Fornace, A. Floris, M. Lazzeri, E. Balan, Reduced partition function ratios of iron and oxygen in goethite, Geochimica et Cosmochimica Acta 151 19-33 (2015) [doi: 10.1016/j.gca.2014.12.006]
  128. E. Strukelj, M. Comte, M. Roskosz, P. Richet, Effect of Zirconium on the Structure and Congruent Crystallization of a Supercooled Calcium Aluminosilicate Melt, Journal of the American Ceramic Society n/a-n/a (2015) [doi: 10.1111/jace.13527]
  129. M. Coquelle, S. Duquesne, M. Casetta, J. Sun, X. Gu, S. Zhang, S. Bourbigot, FLAME RETARDANCY OF PA6 USING A GUANIDINE SULFAMATE/MELAMINE POLYPHOSPHATE MIXTURE, Polymers 7 316-332 (2015) [doi: DOI: 10.3390/polym7020316]
  130. S. Duquesne, F. Samyn, P. Ouagne, S. Bourbigot, FLAME RETARDANCY AND MECHANICAL PROPERTIES OF FLAX REINFORCED WOVEN COMPOSITE, journal of industrial textiles 44(5) 665-681 (2015) [doi: DOI: 10.1177/1528083713505633]
  131. K. Apaydin, A. Laachachi, T. Fouquet, M. Jimenez, S. Bourbigot, D. Ruch, LAYER-BY-LAYER DEPOSITION OF A TIO2-FILLED INTUMESCENT COATING AND ITS EFFECT ON THE FLAME RETARDANCY OF POLYAMIDE AND POLYESTER FABRICS, Colloids and Surfaces A: Physicochemical and Engineering Aspects 469 1-10 (2015) [doi: DOI: 10.1016/j.colsurfa.2014.12.021]
  132. A. Celzard, A. Szczurek, P. Jana, V. Fierro, M. C. Basso, S. Bourbigot, M. S. e. A. Pizzi, LATEST PROGRESSES IN THE PREPARATION OF TANNIN-BASED CELLULAR SOLIDS, Journal of Cellular plastics 51 89-102 (2015) [doi: DOI: 10.1177/0021955X14538273]
  133. Y. Tang, Z. Chen, A. Borbély, G. Ji, S. Y. Zhong, D. Schryvers, V. Ji, H. W. Wang, Quantitative study of particle size distribution in an in-situ grown Al–TiB2 composite by synchrotron X-ray diffraction and electron microscopy, Materials Characterization 102 131-136 (2015) [doi: 10.1016/j.matchar.2015.03.003]
  134. A. Lincot, S. Merkel, P. Cardin, Is inner core seismic anisotropy a marker for plastic flow of cubic iron?, Geophysical Research Letters 42 (2015) [doi: 10.1002/2014GL062862]
  135. A. Malfait, F. Coumes, D. Fournier, G. Cooke, P. Woisel, A water-soluble supramolecular polymeric dual sensor for temperature and pH with an associated direct visible readout, European Polymer Journal 69 552–558 (2015) [doi: 10.1016/j.eurpolymj.2015.02.033]
  136. F. Aubert-viard, A. Martin, F. Chai, C. Neut, N. Tabary, B. Martel, N. Blanchemain, Chitosan finishing nonwoven textiles loaded with silver and iodide for antibacterial wound dressing applications, Biomedical Materials 10 015023 (2015) [doi: 10.1088/1748-6041/10/1/015023]
  137. M. Roskosz, H. Leroux, A significant amount of crystalline silica in returned cometary samples : Bridging the gap between astrophysical and meteoritical observations, The Astrophysical Journal 801 L7 (2015) [doi: 10.1088/2041-8205/801/1/L7]
  138. M. Souada, B. Piro, S. Reisberg, G. Anquetin, V. Noël, M. C. Pham, Label-freeelectrochemicaldetectionofprostate-specific antigenbased on nucleicacidaptamer, Biosensors and Bioelectronics 68 49-54 (2015) [doi: 10.1016/j.bios.2014.12.033]
  139. A. Mussi, P. Cordier, S. Demouchy, Characterization of dislocation interactions in olivine using electron tomography, Philosophical Magazine 95 335-345 (2015) [doi: 10.1080/14786435.2014.1000996]
  140. A. Anghelus, M. N. Avettand-fènoël, C. Cordier, R. Taillard, Microstructural evolution of aluminium/Al–Ni–Sm glass forming alloy laminates obtained by Controlled Accumulative Roll Bonding, Journal of Alloys and Compounds 631 209-218 (2015) [doi: 10.1016/j.jallcom.2014.12.231]
  141. E. Olmos, K. Loubiere, C. Martin, G. Delaplace, A. Marc, Critical agitation for microcarrier suspension in orbital shaken bioreactors: Experimental study and dimensional analysis, Chemical Engineering Science 122 545-554 (2015) [doi: 10.1016/j.ces.2014.08.063]
  142. C. Cunault, C. Faille, L. Bouvier, H. Föste, W. Augustin, S. Scholl, P. Debreyne, T. Benezech, A novel set-up and a CFD approach to study the biofilm dynamics as a function of local flow conditions encountered in fresh-cut food processing equipments, Food and Bioproducts Processing 93 217-223 (2015) [doi: 10.1016/j.fbp.2014.07.005]
  143. N. Collier, D. Callens, P. Campistron, B. Nongaillard, M. Jimenez, G. Alogaili, P. Debreyne, G. Delaplace, Ultrasonic Adhesion Measurement of Whey Protein Fouling, Heat Transfer Engineering 36 771-779 (2015) [doi: 10.1080/01457632.2015.954963]
  144. J. Petit, S. Méjean, P. Accart, L. Galet, P. Schuck, C. Le floch-fouéré, G. Delaplace, R. Jeantet, A dimensional analysis approach for modelling the size of droplets formed by bi-fluid atomisation, Journal of Food Engineering 149 237-247 (2015) [doi: 10.1016/j.jfoodeng.2014.10.022]
  145. M. Khaldi, P. Blanpain-avet, R. Guérin, G. Ronse, L. Bouvier, C. André, S. Bornaz, T. Croguennec, R. Jeantet, G. Delaplace, Effect of calcium content and flow regime on whey protein fouling and cleaning in a plate heat exchanger, Journal of Food Engineering 147 68-78 (2015) [doi: 10.1016/j.jfoodeng.2014.09.020]
  146. Khaldi, P. Blanpain-avet, R. Guérin, G. Ronse, L. Bouvier, C. André, S. Bornaz, T. Croguennec, R. Jeantet, G. Delaplace, Effect of calcium content and flow regime on whey protein fouling and cleaning in a plate heat exchanger, Journal of Food Engineering 147 68-78 (2015) [doi: 10.1016/j.jfoodeng.2014.09.020]
  147. J. Potier, S. Menuel, J. Lyskawa, D. Fournier, F. Stoffelbach, E. Monflier, P. Woisel, F. Hapiot, Thermoresponsive self-assembled cyclodextrin-end-decorated PNIPAM for aqueous catalysis, Chemical Communications 51 2328-2330 (2015) [doi: 10.1039/C4CC09052G]
  148. H. Rouchette, L. Thuinet, A. Legris, A. Ambard, C. Domain, Numerical evaluation of dislocation loop sink strengths: A phase-field approach, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms (2015) [doi: 10.1016/j.nimb.2015.01.006]
  149. G. Serghiou, G. Ji, N. Odling, H. J. Reichmann, D. J. Frost, J. P. Wright, Synthesis and high-resolution study distinguishing between very similar interstitial iron nitride structures, High Pressure Research 1-9 (2015) [doi: 10.1080/08957959.2014.996561]
  150. R. Besson, M. N. Avettand-fènoël, L. Thuinet, J. Kwon, A. Addad, P. Roussel, A. Legris, Mechanisms of formation of Al4Cu9 during mechanical alloying: An experimental study, Acta Materialia 87 216-224 (2015) [doi: 10.1016/j.actamat.2014.12.050]
  151. C. Zhou, D. Chen, X. B. Zhang, Z. Chen, S. Y. Zhong, Y. Wu, G. Ji, H. W. Wang, The roles of geometry and topology structures of graphite fillers on thermal conductivity of the graphite/aluminum composites, Physics Letters A 379 452-457 (2015) [doi: 10.1016/j.physleta.2014.10.048]
  152. N. Garvik, P. Carrez, S. Garruchet, P. Cordier, Numerical modeling of the core structure of [100] dislocations in Fe3C cementite, Scripta Materialia 99 61-64 (2015) [doi: 10.1016/j.scriptamat.2014.11.028]
  153. C. Bollinger, S. Merkel, P. Cordier, P. Raterron, Deformation of forsterite polycrystals at mantle pressure: Comparison with Fe-bearing olivine and the effect of iron on its plasticity, Physics of the Earth and Planetary Interiors 240 95-104 (2015) [doi: 10.1016/j.pepi.2014.12.002]
  154. M. N. Avettand-fenoel, R. Taillard, Heterogeneity of the Nugget Microstructure in a Thick 2050 Al Friction-Stirred Weld, Metallurgical and Materials Transactions A 46 300-314 (2015) [doi: 10.1007/s11661-014-2638-x]
  155. M. Vandenbossche, D. Derozier, M. Casetta, M. Jimenez, S. Bellayer, M. Traisnel, An innovative method to functionalize textiles for the remediation of polluted media, Applied surface science 330 111-117 (2015) [doi:]
  156. C. Zhou, W. Huang, Z. Chen, G. Ji, M. L. Wang, D. Chen, H. W. Wang, In-plane thermal enhancement behaviors of Al matrix composites with oriented graphite flake alignment, Composites Part B: Engineering 70 256-262 (2015) [doi: 10.1016/j.compositesb.2014.11.018]
  157. A. Zarrouk, B. Hammouti, T. Lakhlifi, M. Traisnel, H. Vezin, F. Bentiss, New 1H-pyrrole-2,5-dione derivatives as efficient organic inhibitors of carbonsteel corrosion in hydrochloric acid medium: Electrochemical, XPS and DFT studies, Corrosion Science 90 572-584 (2015) [doi: 10.1016/j.corsci.2014.10.052]
  158. M. Vandenbossche, M. Casetta, M. Jimenez, M. Traisnel, Remediation of Heavy Metals in wastewaters by Biomolecules - A Review, Critical Reviews in Environmental Science and Technology 45(15) 1644-1704 (2015) [doi: 10.1080/10643389.2014.966425]
  159. M. T. Ottou abe, N. T. Correia, L. C. Valdes, J. M. B. Ndjaka, F. Affouard, Local molecular organizations of ibuprofen, flurbiprofen and ketoprofen in the liquid phase: Insights from molecular dynamics simulations, Journal of Molecular Liquids 205 74 (2015) [doi: 10.1016/j.molliq.2014.08.015]
Unité Matériaux et Transformations, CNRS UMR 8207, Université Lille1, Bâtiment C6, 59655 Villeneuve d'Ascq, France
Mentions Légales - Contacter le webmaster
Valid CSSValid HTML 4.01 Transitional