Serge BOURBIGOT

Professeur des universités

Bâtiment C7 - 008
Unité Matériaux et Transformations
Université de Lille
École Nationale Supérieure de Chimie de Lille
Avenue Dimitri Mendeleïev - Bât. C7a
BP 90108
59652 Villeneuve d'Ascq
France
Tel: +33 (0) 320 43 48 88
Fax: +33 (0) 320 43 65 84
Courriel: serge.bourbigot@ensc-lille.fr

Equipe: Ingénierie des systèmes polymères

Thèses en cours

• Alexandre GOSSIAUX, Thermal and fire degradation of rigid polyurethane foam . Thèse débutée en 2018. Co-directeur: Sophie DUQUESNE.
• Thomas NAZé, Fabrication additive de matériaux polymères à faible réaction au feu . Thèse débutée en 2018. Co-directeurs: Maude JIMENEZ, Fanny BONNET, POUTCH Franck.
• Fei XIAO, Flame Redardancy of bioplastics . Thèse débutée en 2018. Co-directeur: Gaëlle FONTAINE.
• Anne Lise DAVESNE, Design de films minces pour la protection au feu. Thèse débutée en 2017. Co-directeur: Maude JIMENEZ.
• Laura GEOFFROY, Conception de multimatériaux ayant de bonnes propriètés de résistance au feu . Thèse débutée en 2017. Co-directeur: Maude JIMENEZ.
• Roland ADANMENOU, Smart measurements at the reduced scale mimicking fire scenarios. Thèse débutée en 2016. Co-directeur: Fabienne SAMYN.
• Aditya RAMGOBIN, Design and synthesis of conceptualized flame retardants . Thèse débutée en 2016. Co-directeur: Gaëlle FONTAINE.
• Sarah CHATENET, Réaction au feu de câbles électriques . Thèse débutée en 2016. Co-directeur: Gaëlle FONTAINE.
• Tatenda NYAZIKA, Conceptualization of a fire barrier : fundamentals and experimental approach . Thèse débutée en 2016. Co-directeur: Fabienne SAMYN.

Thèses soutenues

• Chi HU, Flame retardancy of polybutylene succinate by multiple approaches . Thèse soutenue en 2018. Co-directeur: Gaëlle FONTAINE.
• Nittaya Hansupo, Aspects fondamentaux des systèmes intumescents pour la protection au feu des structures d'acier. Thèse soutenue en 2018. Co-directeur: Fabienne SAMYN.
• Benjamin Prieur, Lignines modifiées comme additif retardateur de flamme pour matériaux polymères. Thèse soutenue en 2016. Co-directeur: Gaëlle FONTAINE.
• Bertrand Girardin, Contribution à l’étude du comportement au feu de câbles électriques par simulation numérique et par développement d’un banc d’essai à échelle réduite. Thèse soutenue en 2016. Co-directeur: Sophie DUQUESNE.
• Pauline TRANCHARD, Modelling the behaviour of a carbon/epoxy composite submitted to fire. Thèse soutenue en 2015. Co-directeur: Fabienne SAMYN. Situation actuelle: Chargé de mission chez SAFRAN/Zodiac à Iteville.
• Renaud Dupretz, Synthèse de nouveaux retardateurs de flamme pour le poly(terephthalate de butylene) et le polyamide 6. Thèse soutenue en 2015. Co-directeur: Sophie DUQUESNE. Situation actuelle: CDI au CERIB Centre d'Etudes et de Recherche de l'Industrie du Béton.
• Kadir Apaydin, Développement, caractérisation et mécanisme de revêtements anti-feu élaborés par voie humide et par voie sèche. Thèse soutenue en 2014. Co-directeur: Maude JIMENEZ. Situation actuelle: Recherche d'emploi.
• Franck-Estimé Ngohang, Couplage Mass loss cone, Spectrométrie Infrarouge à Transformée Fourier, Impacteur basse pression pour la caractérisation du comportement au feu des matériaux. Thèse soutenue en 2014. Co-directeur: Gaëlle FONTAINE. Situation actuelle: Recherche d'emploi - Retour au Gabon Courant Octobre 2014.
• Carmen Hoffendahl , Procédé de polymères EVM ignifugés à faible émission de fumées. Thèse soutenue en 2014. Co-directeur: Gaëlle FONTAINE. Situation actuelle: CDI chez Harke Chemicals à "Mülheim an der Ruhr" en Allemagne Technical Sales Manager.
• Bastien Gardelle, éveloppement et résistance au feu de revêtement intumescent à base de silicone : protection de l'acier en cas d'incendie. Thèse soutenue en 2013. Co-directeur: Sophie DUQUESNE. Situation actuelle: Ingénieur développement en sciences des matériaux chez chez Dassault Aviation.
• Jérémy Louisy, Synthèse de nouveaux sels de phosphinate et développement de formulations pour l’ignifugation du PolybutyleneTerephthalate renforcé par des fibres de verre. Thèse soutenue en 2012. Co-directeur: Sophie DUQUESNE. Situation actuelle: Ingénieur R&D Gerflor.
• Maryska Muller, Approche systémique des effets de synergie dans les procédés d’ignifugation de polyuréthanes intumescents. Thèse soutenue en 2012. Co-directeur: Sophie DUQUESNE.
• Antoine Gallos, Polylactides stéréocomplexés et ignifugés : élaboration par extrusion réactive et caractérisations. Thèse soutenue en 2011. Co-directeur: Gaëlle FONTAINE.
• Caroline Gérard, Apport des nanoparticules à l'ignifugation de résines époxydes. Thèse soutenue en 2011. Co-directeur: Gaëlle FONTAINE.
• Jérémy Ciret, Contribution à l’étude de l’intumescence pour la protection au feu : application au jet-fire. Thèse soutenue en 2010. Co-directeur: Sophie DUQUESNE.
• Oriane Cerin, Investigation et compréhension des procédés d’ignifugation d’un elastomère. Thèse soutenue en 2010. Co-directeur: Sophie DUQUESNE.
• Louis Garnier, procédés, caractérisation et modélisation d’alliage de polymères élastiques aptes au filage. Thèse soutenue en 2009. Co-directeur: Sophie DUQUESNE.
• Virginie Boucher, Polycarbonate nanocomposite : étude de la transparence pour applications automobile et lunetterie. Thèse soutenue en 2008. Co-directeur: Sophie DUQUESNE. Situation actuelle: Post-doctorat au Donostia International Physics Center, (DIPC), à San Sebastian (Espagne).
• Damien Delaval, Elaboration et étude du comportement au feu de polypropylène recycle. Thèse soutenue en 2008. Co-directeur: Michel TRAISNEL.
• Sébih Z., Compréhension des procédés d'ignifugation du polyamide-6 - Apport des nanocomposites aux systèmes retardateurs de flamme phosphorés. Thèse soutenue en 2007. Co-directeur: René Delobel.
• Fabienne Samyn, Compréhension des procédés d’ignifugation du polyamide 6, Apport des nanocomposites aux systèmes retardateurs de flamme phosphorés, . Thèse soutenue en 2007. Co-directeur: Charafeddine JAMA.
• Maude JIMENEZ, Etude des mécanismes de protection et de réaction au feu dans les revêtements intumescents. Thèse soutenue en 2006. Co-directeur: Sophie DUQUESNE. Situation actuelle: Professeur au laboratoire.
• Séverine BELLAYER, Elaboration de nouveaux polymeres a structure nanocomposite. Thèse soutenue en 2005. Co-directeur: X. Flambard . Situation actuelle: Ingénieur de Recherche à l’ENSCL.
• Belva F., Synthèse et caractérisation de matériaux hybrides polyuréthane/polydiméthylsiloxane – Compréhension de leur comportement au feu. Thèse soutenue en 2005. Co-directeur: M. Le Bras .

Brevets

11. 2016 - B. Ohl, G. Michaux, M. Casetta, S. Duquesne, S. Bourbigot: ELEMENT DE BOITIER D’APPAREILLAGE ELECTRIQUE COMPRENANT UNE COMPOSITION IGNIFUGE SPECIFIQUE.
    WO2016026967 A1 par la société Schneider Electric
10. 2015 - S. Priemen, P. Bachelet, F. Samyn, S. Duquesne, S. Bourbigot: POLYISOCYANATE-BASED INTUMESCENT COATING .
    WO2015052148 A1,par la société Huntsman
9. 2013 - S. Bourbigot, S. Duquesne, B. Gardelle, P. Vandereecken: PROTECTING SUBSTRATES AGAINST DAMAGE BY FIRE .
   WO 2013/150121 - par la société Dow Corning
8. 2011 - S. Bourbigot, S. Duquesne, F. Samyn, M. Muller, C. Lindsay, R. Klein, G. Giannini: FORMULATION SUITABLE TO PROVIDE FLAME RETARDANCY TO POLYURETHANE .
   EP11156519.8 - par la société Huntsman
7. 2011 - H. Gallou, M. Jimenez, S. Duquesne, C. Jama, R. Delobel, S. Bourbigot, X. Couillens: Fire retardant polyamide cast item including an intumescent coating .
   WO/2011/045426, par la société Rhodia
6. 2010 - V. Boucher, S. Duquesne, S. Bourbigot, S. Y. Didier, M. Lacroix, A. Roos, N. Cornet, L. Meynie: Procédé De Préparation D'Un Matériau Polymère Transparent Comprenant Des Nanoparticules Minérales Ayant Un Facteur De Forme Strictement Supérieur à 1.0.
   FR2009/052320, Solvay SA, Essilor International (Compagnie Générale d'Optique),Renault s.a.s.
5. 2010 - A. Roos, G. Bergmann, M. L. Rosa, O. Cerin, G. Fontaine, S. Duquesne, S. Bourbigot: Flame-Proofed Polymer Compositions .
   US2013123398 (A1)- par la société Lanxess Deutschland GmbH
4. 2009 - N. Clavel, O. Cerin, S. Bourbigot: BITUMEN COMPOSITIONS.
   EPC/09305561.4-2102 - par Shell Internationale Research Maatschappij
3. 2008 - S. Solarski, E. Devaux, M. Ferreira, G. Fontaine, S. Bourbigot, R. Delobel, M. Alexandre, M. Murariu, P. Dubois: Polylactide-based compositions.
   PCT/EP2008/051295 – par Materia Nova / ENSAIT / ENSCL, 2008
2. 2007 - V. Boucher, A. Roos, S. Duquesne, S. Bourbigot, L. Meynie, K. Cavalier, S. Y. Didier, M. Lacroix: Method of preparing a transparent polymer material comprising a thermoplastic polycarbonate and mineral nanoparticles. .
   US2011034588 (A1) – par Essilor International (Compagnie Générale d’Optique), Renault s.a.s, Solvay SA
1. 2006 - F. Salaün, E. Devaux, S. Bourbigot, P. Rumeau: Microcapsules comprenant des matériaux notament à changement de phase.
   PCT/FR2005/02986, 41 pages, CODEN: FRXXBL FR 2879112 A1 20060616 CAN 145:34305 AN 2006:57985 – par IFTH / ENSAIT, 2006

Communications et séminaires récents

16 seminaires. 203 communication(s) orale(s), dont 75 invité(e)s, 2 plénière(s). 30 communication(s) par affiche. Liste détaillée.

Publications de vulgarisation, éditoriaux

4. M. Jimenez, C. Reti, M. Casetta, S. Duquesne, S. Bourbigot, Nuove Techniche di lavorazione dei rivestimenti ritardanti di Fiamma, Part II, Pitture e Vernici-European Coatings 4 7-12 (2011)
3. M. Jimenez, C. Reti, M. Casetta, S. Duquesne, S. Bourbigot, Nuove Techniche di lavorazione dei rivestimenti ritardanti di Fiamma, Part I, Pitture e Vernici-European Coatings 3 25-29 (2011)
2. M. Jimenez, C. Reti, M. Casetta, S. Duquesne, S. Bourbigot, Nuove Techniche di lavorazione dei rivestimenti ritardanti di Fiamma, Part II, Via Mare By Sea 11 23-30 (2011)
1. M. Jimenez, C. Reti, M. Casetta, S. Duquesne, S. Bourbigot, Nuove Techniche di lavorazione dei rivestimenti ritardanti di Fiamma, Part I,, Via Mare By Sea 2 (2011)

Chapitres d'ouvrage

2. B. Gardelle, S. Duquesne, P. Vandereecken, S. Bourbigot, in Fire and Polymers VI: New Advances in Flame Retardant Chemistry and Science [A. B. Morgan, C. A. Wilkie, G. L. Nelson (Eds)], American Chemical Society, Chapter 15, pp 205-221 (2012) [doi: 10.1021/bk-2012-1118.ch015]
1. S. Duquesne, M. Jimenez, S. Bourbigot, in Royal Society of Chemistry book: Fire retardancy of Polymers - new strategies and mechanisms [Eds: R. Hull, B. Kandola], Chap.16: p.240-252 (2008)

Publications dans des revues internationales

• 2019
  205. E. Louisy, F. Samyn, S. Bourbigot, G. Fontaine, F. Bonnet, Preparation of Glass Fabric/Poly(L-lactide) Composites by Thermoplastic Resin Transfer Molding, Polymers 11 339 (2019) [doi: 10.3390/polym11020339]
  204. A. Ramgobin, G. Fontaine, S. Bourbigot, Thermal Degradation and Fire Behavior of High Performance Polymers, Polymer Reviews 15 1-69 (2019) [doi: 10.1080/15583724.2018.1546736]
  203. G. Okyay, A. D. Naik, F. Samyn, M. Jimenez, S. Bourbigot, Fractal conceptualization of intumescent fire barriers, toward simulations of virtual morphologies, Scientific Reports 9 1003 (2019) [doi: 10.1038/s41598-019-38515-9]
  202. S. Bourbigot, J. Sarazin, F. Samyn, M. Jimenez, Intumescent ethylene-vinyl acetate copolymer: Reaction to fire and mechanistic aspects, Polymer Degradation and Stability 161 235-244 (2019) [doi: 10.1016/j.polymdegradstab.2019.01.029]
• 2018
  201. C. I. Idumah, A. Hassan, S. Bourbigot, Synergistic effect of exfoliated graphene nanoplatelets and non-halogen flame retardants on flame retardancy and thermal properties of kenaf flour-PP nanocomposites, Journal of Thermal Analysis and Calorimetry 134 1681-1703 (2018) [doi: 10.1007/s10973-018-7833-3]
  200. T. Nyazika, M. Jimenez, F. Samyn, S. Bourbigot, Modeling heat transfers across a silicone-based intumescent coating, Journal of Physics: Conference Series 1107 032012 (2018) [doi: 10.1088/1742-6596/1107/3/032012]
  199. C. Hu, G. Fontaine, P. Tranchard, T. Delaunay, M. Collinet, S. Marcille, S. Bourbigot, In-situ investigation of temperature evolution of drippings via an optimized UL-94 instrumentation: Application to flame retarded polybutylene succinate, Polymer Degradation and Stability 155 145-152 (2018) [doi: 10.1016/j.polymdegradstab.2018.07.015]
  198. S. Bourbigot, J. Sarazin, F. Samyn, M. Jimenez, Maze running into intumescence: mechanistic aspects in polypropylene, Journal of Physics: Conference Series 1107 032001 (2018) [doi: 10.1088/1742-6596/1107/3/032001]
  197. A. D. Naik, S. Bourbigot, S. Bellayer, N. Touati, K. Ben Tayeb, H. Vezin, G. Fontaine, Salen Complexes as Fire Protective Agents for Thermoplastic Polyurethane: Deep Electron Paramagnetic Resonance Spectroscopy Investigation, ACS Applied Materials & Interfaces 10 24860-24875 (2018) [doi: 10.1021/acsami.8b07323]
  196. L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, Intumescent Polymer Metal Laminates for Fire Protection, Polymers 10 995 (2018) [doi: doi:10.3390/polym10090995]
  195. S. Lazar, F. Carosio, A. L. Davesne, M. Jimenez, S. Bourbigot, J. C. Grunlan, Extreme Heat Shielding of Clay/Chitosan Nanobrick Wall on Flexible Foam, ACS Applied Materials & Interfaces (2018) [doi: 10.1021/acsami.8b10227]
  194. G. Okyay, S. Bellayer, F. Samyn, M. Jimenez, S. Bourbigot, Characterization of in-flame soot from balsa composite combustion during mass loss cone calorimeter tests, Polymer Degradation and Stability 154 304-311 (2018) [doi: 10.1016/j.polymdegradstab.2018.06.013]
  193. C. Delgado-Sánchez, J. Sarazin, F. J. Santiago-Medina, V. Fierro, A. Pizzi, S. Bourbigot, A. Celzard, Impact of the formulation of biosourced phenolic foams on their fire properties, Polymer Degradation and Stability 153 1-14 (2018) [doi: 10.1016/j.polymdegradstab.2018.04.006]
  192. D. Vadas, T. Igricz, J. Sarazin, S. Bourbigot, G. Marosi, K. Bocz, Flame retardancy of microcellular poly(lactic acid) foams prepared by supercritical CO 2 -assisted extrusion, Polymer Degradation and Stability 153 100-108 (2018) [doi: 10.1016/j.polymdegradstab.2018.04.021]
  191. N. Hansupo, G. Tricot, S. Bellayer, P. Roussel, F. Samyn, S. Duquesne, M. Jimenez, M. Hollman, P. Catala, S. Bourbigot, Getting a better insight into the chemistry of decomposition of complex flame retarded formulation: New insights using solid state NMR, Polymer Degradation and Stability 153 145-154 (2018) [doi: 10.1016/j.polymdegradstab.2018.04.028]
  190. L. Murer, S. Chatenet, G. Fontaine, S. Bourbigot, O. Authier, Influence of model assumptions on charring polymer decomposition in the cone calorimeter, Journal of Fire Sciences 073490411876164 (2018) [doi: 10.1177/0734904118761641]
  189. M. Casetta, G. Michaux, B. Ohl, S. Duquesne, S. Bourbigot, Key role of magnesium hydroxide surface treatment in the flame retardancy of glass fiber reinforced polyamide 6, Polymer Degradation and Stability 148 95-103 (2018) [doi: 10.1016/j.polymdegradstab.2018.01.007]
  188. S. Bellayer, M. Jimenez, B. Prieur, B. Dewailly, A. Ramgobin, J. Sarazin, B. Revel, G. Tricot, S. Bourbigot, Fire retardant sol-gel coated polyurethane foam: Mechanism of action, Polymer Degradation and Stability 147 159-167 (2018) [doi: 10.1016/j.polymdegradstab.2017.12.005]
• 2017
  187. X. Jin, J. Sun, J. S. Zhang, X. Gu, S. Bourbigot, H. Li, W. Tang, S. Zhang, Preparation of a Novel Intumescent Flame Retardant Based on Supramolecular Interactions and Its Application in Polyamide 11, ACS Applied Materials & Interfaces 9 24964-24975 (2017) [doi: 10.1021/acsami.7b06250]
  186. X. Jin, X. Gu, C. Chen, W. Tang, H. Li, X. Liu, S. Bourbigot, Z. Zhang, J. Sun, S. Zhang, The fire performance of polylactic acid containing a novel intumescent flame retardant and intercalated layered double hydroxides, Journal of Materials Science 52 12235-12250 (2017) [doi: 10.1007/s10853-017-1354-5]
  185. A. Ramgobin, G. Fontaine, C. Penverne, S. Bourbigot, Thermal Stability and Fire Properties of Salen and Metallosalens as Fire Retardants in Thermoplastic Polyurethane (TPU), Materials 10 665 (2017) [doi: 10.3390/ma10060665]
  184. P. Tranchard, S. Duquesne, F. Samyn, B. Estebe, S. Bourbigot, Kinetic analysis of the thermal decomposition of a carbon fibre-reinforced epoxy resin laminate, Journal of Analytical and Applied Pyrolysis (2017) [doi: 10.1016/j.jaap.2017.07.002]
  183. B. Prieur, M. Meub, M. Wittemann, R. Klein, S. Bellayer, G. Fontaine, S. Bourbigot, Phosphorylation of lignin: characterization and investigation of the thermal decomposition, RSC Adv. 7 16866-16877 (2017) [doi: 10.1039/C7RA00295E]
  182. J. Sarazin, P. Bachelet, S. Bourbigot, Fire behavior of simulated low voltage intumescent cables with and without electric current, Journal of Fire Sciences 35 179-194 (2017) [doi: 10.1177/0734904117698843]
  181. P. Tranchard, F. Samyn, S. Duquesne, B. Estèbe, S. Bourbigot, Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part I—Characterisation of Thermophysical Properties., Materials 10 494 (2017) [doi: 10.3390/ma10050494]
  180. P. Tranchard, F. Samyn, S. Duquesne, B. Estèbe, S. Bourbigot, Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part II—Comparison with Experimental Results., Materials 10 470 (2017) [doi: 10.3390/ma10050470]
  179. N. Lesaffre, S. Bellayer, H. Vezin, G. Fontaine, M. Jimenez, S. Bourbigot, Recent advances on the ageing of flame retarded PLA: Effect of UV-light and/or relative humidity, Polymer Degradation and Stability 139 143-164 (2017) [doi: 10.1016/j.polymdegradstab.2017.04.007]
  178. B. Girardin, G. Fontaine, S. Duquesne, M. Försth, S. Bourbigot, Measurement of kinetics and thermodynamics of the thermal degradation for flame retarded materials: Application to EVA/ATH/NC, Journal of Analytical and Applied Pyrolysis 124 130-148 (2017) [doi: 10.1016/j.jaap.2016.12.034]
  177. C. I. Idumah, A. Hassan, S. Bourbigot, Influence of exfoliated graphene nanoplatelets on flame retardancy of kenaf flour polypropylene hybrid nanocomposites, Journal of Analytical and Applied Pyrolysis 123 65-72 (2017) [doi: 10.1016/j.jaap.2017.01.006]
  176. B. Rimez, H. Rahier, M. Biesemans, S. Bourbigot, B. Van Mele, Modelled decomposition mechanism of flame retarded poly(vinyl acetate) by melamine isocyanurate, Journal of Thermal Analysis and Calorimetry 127 2315-2324 (2017) [doi: 10.1007/s10973-016-5783-1]
• 2016
  175. A. D. Naik, S. Duquesne, S. Bourbigot, Hydrocarbon time–temperature curve under airjet perturbation: An in situ method to probe char stability and integrity in reactive fire protection coatings, Journal of Fire Sciences 34 385-397 (2016) [doi: 10.1177/0734904116658049]
  174. Y. Ding, M. B. Mckinnon, S. I. Stoliarov, G. Fontaine, S. Bourbigot, Determination of kinetics and thermodynamics of thermal decomposition for polymers containing reactive flame retardants: Application to poly(lactic acid) blended with melamine and ammonium polyphosphate, Polymer Degradation and Stability 129 347-362 (2016) [doi: 10.1016/j.polymdegradstab.2016.05.014]
  173. B. Rimez, G. Van Assche, S. Bourbigot, H. Rahier, Modelled decomposition kinetics of flame retarded poly(vinyl acetate), Polymer Degradation and Stability 130 245-256 (2016) [doi: 10.1016/j.polymdegradstab.2016.06.021]
  172. B. Girardin, G. Fontaine, S. Duquesne, S. Bourbigot, Fire tests at reduced scale as powerful tool to fasten the development of flame-retarded material: Application to cables, Journal of Fire Sciences 34 240-264 (2016) [doi: 10.1177/0734904116642618]
  171. B. K. Cirpici, Y. C. Wang, B. D. Rogers, S. Bourbigot, A theoretical model for quantifying expansion of intumescent coating under different heating conditions, Polymer Engineering & Science 56 798-809 (2016) [doi: 10.1002/pen.24308]
  170. B. Prieur, M. Meub, M. Wittemann, R. Klein, S. Bellayer, G. Fontaine, S. Bourbigot, Phosphorylation of lignin to flame retard acrylonitrile butadiene styrene (ABS), Polymer Degradation and Stability 127 32-43 (2016) [doi: 10.1016/j.polymdegradstab.2016.01.015]
  169. S. Zhang, W. Tang, X. Gu, P. Jiang, J. Sun, S. Duquesne, S. Bourbigot, M. Casetta, Flame retardancy and thermal and mechanical performance of intercalated, layered double hydroxide composites of polyamide 11, aluminum phosphinate, and sulfamic acid, Journal of Applied Polymer Science 133 (2016) [doi: 10.1002/app.43370]
  168. M. Jimenez, S. Bellayer, A. Naik, P. Bachelet, S. Duquesne, S. Bourbigot, Topcoats versus Durability of an Intumescent Coating, Industrial and Engineering Chemistry Research 55 9625-9632 (2016) [doi: 10.1021/acs.iecr.6b02484]
  167. M. Jimenez, T. Guin, S. Bellayer, R. Dupretz, S. Bourbigot, J. C. Grunlan, Microintumescent mechanism of flame retardant water-based chitosan-ammonium polyphosphate multinlayer nanocoating on cotton fabric, Journal of Applied Polymer Science 133 43783 (2016) [doi: 10.1002/app.43783]
  166. S. Bellayer, M. Jimenez, S. Barrau, S. Bourbigot, Fire retardant sol-gel coatings for flexible polyurethane foams, RSC Advances 6 28543-28554 (2016) [doi: 10.1039/C6RA02094A]
  165. N. Lesaffre, S. Bellayer, G. Fontaine, M. Jimenez, S. Bourbigot, Revealing the impact of ageing on a flame retarded PLA, Polymer Degradation and Stability 127 88-97 (2016) [doi: 10.1016/j.polymdegradstab.2015.10.019]
• 2015
  164. J. Alongi, F. Cuttica, S. Bourbigot, G. Malucelli, Thermal and flame retardant properties of ethylene vinyl acetate copolymers containing deoxyribose nucleic acid or ammonium polyphosphate, Journal of thermal analysis and calorimetry (2015) [doi: DOI: 10.1007/s10973-015-4808-5]
  163. J. Alongi, F. Cuttica, F. Carosio, S. Bourbigot, How much the fabric grammage may affect cotton combustion?, Cellulose 22 3477-3489 (2015) [doi: DOI: 10.1007/s10570-015-0717-9]
  162. J. Alongi, Z. Han, S. Bourbigot, Intumescence: Tradition versus novelty. A comprehensive review, Progress in Polymer Science (2015) [doi: DOI: 10.1016/j.progpolymsci.2015.04.010]
  161. R. Crétois, N. Follain, E. Dargent, J. Soulestin, S. Bourbigot, S. Marais, L. Lebrun, Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) based nanocomposites: Influence of the microstructure on the barrier properties, Physical Chemistry Chemical Physics 17 11313-11323 (2015) [doi: DOI: 10.1039/c4cp05524a]
  160. R. Dupretz, G. Fontaine, S. Duquesne, S. Bourbigot, Instrumentation of UL-94 test: understanding of mechanisms involved in fire retardancy of polymers, Polymers for Advanced Technologies 26 865-873 (2015) [doi: DOI: 10.1002/pat.3507]
  159. B. Girardin, G. Fontaine, S. Duquesne, M. Försth, S. Bourbigot, Characterization of thermo-physical properties of EVA/ATH: Application to gasification experiments and pyrolysis modeling, Materials 8 7837-7863 (2015) [doi: DOI: 10.3390/ma8115428]
  158. R. Heidar-Pour, M. Soheilmoghaddam, A. Hassan, S. Bourbigot, Flammability and thermal properties of polycarbonate /acrylonitrile-butadiene-styrene nanocomposites reinforced with multilayer graphene, Polymer Degradation and Stability 120 88-97 (2015) [doi: DOI: 10.1016/j.polymdegradstab.2015.06.013]
  157. P. Jiang, X. Gu, S. Zhang, J. Sun, R. Xu, S. Bourbigot, S. Duquesne, M. Casetta, Flammability and thermal degradation of poly (lactic acid)/polycarbonate alloys containing a phosphazene derivative and trisilanollsobutyl POSS, Polymer 79 221-231 (2015) [doi: DOI: 10.1016/j.polymer.2015.10.029]
  156. B. K. Kandola, P. Luangtriratana, S. Duquesne, S. Bourbigot, The effects of thermophysical properties and environmental conditions on fire performance of intumescent coatings on glass fibre-reinforced epoxy composites, Materials 8 5216-5237 (2015) [doi: DOI: 10.3390/ma8085216]
  155. B. Rimez, H. Rahier, M. Biesemans, S. Bourbigot, B. Vanmele, Flame retardancy and degradation mechanism of poly(vinyl acetate) in combination with intumescent flame retardants: I. Ammonium poly(phosphate), Polymer Degradation and Stability 121 321-330 (2015) [doi: DOI: 10.1016/j.polymdegradstab.2015.09.024]
  154. F. Carosio, G. Fontaine, J. Alongi, S. Bourbigot, Starch-Based Layer by Layer Assembly: Efficient and Sustainable Approach to Cotton Fire Protection, ACS Applied Materials & Interfaces 7(22) 12158-12167 (2015) [doi: 10.1021/acsami.5b02507]
  153. A. D. Naik, G. Fontaine, S. Bellayer, S. Bourbigot, Crossing the Traditional Boundaries: Salen-Based Schiff Bases for Thermal Protective Applications, ACS Applied Materials & Interfaces 7(38) 21208-21217 (2015) [doi: 10.1021/acsami.5b05164]
  152. P. Tranchard, F. Samyn, S. Duquesne, M. Thomas, B. Estèbe, J. L. Montès, S. Bourbigot, Fire behaviour of carbon fibre epoxy composite for aircraft: Novel test bench and experimental study, Journal of Fire Sciences 33 247-266 (2015) [doi: doi:10.1177/0734904115584093]
  151. M. Jimenez, N. Lesaffre, S. Bellayer, R. Dupretz, M. Vandenbossche, S. Duquesne, S. Bourbigot, Novel flame retardant flexible polyurethane foam: plasma induced graft-polymerization of phosphonates, RSC Advances 5 63853-63865 (2015) [doi: 10.1039/C5RA08289G]
  150. J. Bardon, K. Apaydin, A. Laachachi, M. Jimenez, T. Fouquet, F. Hilt, S. Bourbigot, D. Ruch, Characterization of a plasma polymer coating from an organophosphorus silane deposited at atmospheric pressure for fire-retardant purposes, Progress in Organic Coatings 88 39-47 (2015) [doi: doi:10.1016/j.porgcoat.2015.06.005]
  149. C. Hoffendahl, S. Duquesne, G. Fontaine, F. Taschner, M. Mezger, S. Bourbigot, The combination of aluminum trihydroxide (ATH) and melamine borate (MB) as fire retardant additives for elastomeric ethylene vinyl acetate (EVM)., Polymer Degradation and Stability 115 77-88 (2015) [doi: 10.1016/j.polymdegradstab.2015.03.001]
  148. F. E. Ngohang, G. Fontaine, L. Gay, S. Bourbigot, Smoke composition using MLC/FTIR/ELPI: Application to flame retarded ethylene vinyl acetate, Polymer Degradation and Stability 115 89-109 (2015) [doi: 10.1016/j.polymdegradstab.2015.03.002]
  147. F. Bonnet, F. Stoffelbach, G. Fontaine, S. Bourbigot, Continuous cyclo-polymerisation of L-lactide by reactive extrusion using atoxic metal-based catalysts: easy access to well-defined polylactide macrocycles, RSC Advances 5 31303-31310 (2015) [doi: 10.1039/C4RA16634E]
  146. D. Battegazzore, J. Alongi, G. Fontaine, A. Frache, S. Bourbigot, G. Malucelli, Bulk vs.surface flame retardancy of fully bio-based polyamide 10,10, RSC Advances 5 39424-39432 (2015) [doi: 10.1039/C5RA04149J]
  145. A. D. Naik, G. Fontaine, S. Bellayer, S. Bourbigot, Salen based Schiff bases to flame retard thermoplastic polyurethane mimicking operational strategies of thermosetting resin, RSC Advances 5 48224-48235 (2015) [doi: 10.1039/C5RA06242J]
  144. S. Bellayer, M. Jimenez, B. Gardelle, G. Delaplace, J. Bouquerel, S. Duquesne, S. Bourbigot, The electron microanalyzer (EPMA): a powerful device for the microanalysis of filled polymeric materials, Polymers for Advanced Technologies (2015) [doi: 10.1002/pat.3523]
  143. J. Alongi, A. D. Blasio, J. Milnes, G. Malucelli, S. Bourbigot, B. Kandola, G. Camino, THERMAL DEGRADATION OF DNA, AN ALL-IN-ONE NATURAL INTUMESCENT FLAME RETARDANT, Polymer Degradation and Stability 113 110-118 (2015) [doi: http://dx.doi.org/10.1016/j.polymdegradstab.2014.11.001]
  142. A. Witkowski, B. Girardin, M. Försth, F. Hewitt, G. Fontaine, S. Duquesne, S. Bourbigot, T. R. Hull, DEVELOPMENT OF AN ANAEROBIC PYROLYSIS MODEL FOR FIRE RETARDANT CABLE SHEATHING MATERIALS, Polymer Degradation and Stability 113 208-217 (2015) [doi: http://dx.doi.org/10.1016/j.polymdegradstab.2015.01.006]
  141. C. Hoffendahl, G. Fontaine, S. Duquesne, F. Taschner, M. Mezger, S. Bourbigot, DECOMPOSITION MECHANISM OF FIRE RETARDED ETHYLENE VINYL ACETATE ELASTOMER (EVA) CONTAINING ALUMINUM TRIHYDROXIDE AND MELAMINE, Polymer Degradation and Stability 113 168-179 (2015) [doi: http://dx.doi.org/10.1016/j.polymdegradstab.2014.09.016]
  140. M. Coquelle, S. Duquesne, M. Casetta, J. Sun, X. Gu, S. Zhang, S. Bourbigot, FLAME RETARDANCY OF PA6 USING A GUANIDINE SULFAMATE/MELAMINE POLYPHOSPHATE MIXTURE, Polymers 7 316-332 (2015) [doi: DOI: 10.3390/polym7020316]
  139. S. Duquesne, F. Samyn, P. Ouagne, S. Bourbigot, FLAME RETARDANCY AND MECHANICAL PROPERTIES OF FLAX REINFORCED WOVEN COMPOSITE, journal of industrial textiles 44(5) 665-681 (2015) [doi: DOI: 10.1177/1528083713505633]
  138. K. Apaydin, A. Laachachi, T. Fouquet, M. Jimenez, S. Bourbigot, D. Ruch, LAYER-BY-LAYER DEPOSITION OF A TIO2-FILLED INTUMESCENT COATING AND ITS EFFECT ON THE FLAME RETARDANCY OF POLYAMIDE AND POLYESTER FABRICS, Colloids and Surfaces A: Physicochemical and Engineering Aspects 469 1-10 (2015) [doi: DOI: 10.1016/j.colsurfa.2014.12.021]
  137. A. Celzard, A. Szczurek, P. Jana, V. Fierro, M. C. Basso, S. Bourbigot, M. S. E. A. Pizzi, LATEST PROGRESSES IN THE PREPARATION OF TANNIN-BASED CELLULAR SOLIDS, Journal of Cellular plastics 51 89-102 (2015) [doi: DOI: 10.1177/0021955X14538273]
• 2014
  136. J. Sun, X. Gu, S. Zhang, M. Coquelle, S. Bourbigot, S. Duquesne, M. Casetta, Improving the flame retardancy of polyamide 6 by incorporating hexachlorocyclotriphosphazene modified MWNT, Polymers for Advanced Technologies 25 1099-1107 (2014) [doi: 10.1002/pat.3358]
  135. A. Gallos, G. Fontaine, S. Bourbigot, INFLUENCE OF MWNT AND -TROPOLONE ON THERMAL STABILITY AND CRYSTALLINITY BEHAVIOR OF STEREOCOMPLEXED POLY-L,D-LACTIDES, Industrial and Engineering Chemistry Research 53(22) 9377-9382 (2014) [doi: DOI: dx.doi.org/10.1021/ie403657p]
  134. A. D. Naik, G. Fontaine, F. Samyn, S. Bellayer, X. Delva, Y. Bourgeois, S. Bourbigot, OUTLINING THE MECHANISM OF FLAME RETARDANCY IN POLYAMIDE 66 BLENDED WITH MELAMINE POLY(ZINC PHOSPHATE), Fire Safety Journal 70 46-60 (2014) [doi: DOI: 10.1016/j.firesaf.2014.08.019]
  133. G. Stoclet, M. Sclavons, B. Lecouvet, J. Devaux, P. V. Velthem, S. Bourbigot, N. Sallem-Idrissi, ELABORATION OF POLY(LACTIC ACID)/HALLOYSITE NANOCOMPOSITES BY MEANS OF WATER ASSISTED EXTRUSION: STRUCTURE, MECHANICAL PROPERTIES AND FIRE PERFORMANCE, RSC Advances 4 57553-57563 (2014) [doi: DOI: 10.1039/c4ra06845a]
  132. K. Apaydin, A. Laachachi, T. Fouquet, M. Jimenez, S. Bourbigot, D. Ruch, Mechanistic investigation of flame retardant coatings made by Layer-by-Layer, RSC Advances 4(82) 43326-43334 (2014) [doi: DOI: 10.1039/C4RA08500K]
  131. J. Alongi, J. Milnes, G. Malucelli, S. Bourbigot, B. Kandola, THERMAL DEGRADATION OF DNA-TREATED COTTON FABRICS UNDER DIFFERENT HEATING CONDITIONS, Journal of Analytical and Applied Pyrolysis 108 pp. 212-221 (2014) [doi: DOI: 10.1016/j.jaap.2014.04.014]
  130. F. Samyn, S. Bourbigot, PROTECTION MECHANISM OF A FLAME RETARDED PA6 NANOCOMPOSITE, Journal of Fire Sciences 32(3) pp. 241-256 (2014) [doi: 10.1177/0734904113510685]
  129. M. Coquelle, S. Duquesne, M. Casetta, J. Sun, S. Zhang, S. Bourbigot, INVESTIGATION OF THE DECOMPOSITION PATHWAY OF POLYAMIDE 6/AMMONIUM SULFAMATE FIBERS, Polymer Degradation and Stability 106 pp. 150-157 (2014) [doi: DOI: 10.1016/j.polymdegradstab.2014.02.007]
  128. C. Hoffendahl, G. Fontaine, S. Duquesne, F. Taschner, M. Mezger, S. Bourbigot, DECOMPOSITION MECHANISM OF MELAMINE BORATE IN PYROLYTIC AND THERMO-OXIDATIVE CONDITIONS, Thermochimica Acta 590 pp. 73-83 (2014) [doi: DOI: 10.1016/j.tca.2014.06.016]
  127. F. E. Ngohang, G. Fontaine, L. Gay, S. Bourbigot, REVISITED INVESTIGATION OF FIRE BEHAVIOR OF ETHYLENE VINYL ACETATE/ALUMINUM TRIHYDROXIDE USING A COMBINATION OF MASS LOSS CONE, FOURIER TRANSFORM INFRARED SPECTROSCOPY AND ELECTRICAL LOW PRESSURE IMPACTOR, Polymer Degradation and Stability 106 pp. 26-35 (2014) [doi: DOI: 10.1016/j.polymdegradstab.2014.01.019]
  126. R. Crétois, N. Follain, E. Dargent, J. Soulestin, S. Bourbigot, S. Marais, L. Lebrun, MICROSTRUCTURE AND BARRIER PROPERTIES OF PHBV/ORGANOCLAYS BIONANOCOMPOSITES, Journal of Membrane Science 467 pp. 56-66 (2014) [doi: DOI: 10.1016/j.memsci.2014.05.015]
  125. C. Hoffendahl, G. Fontaine, S. Duquesne, F. Taschner, M. Mezger, S. Bourbigot, FIRE RETARDANT MECHANISM OF ETHYLENE VINYL ACETATE ELASTOMER (EVM) CONTAINING ALUMINIUM TRIHYDROXIDE AND MELAMINE PHOSPHATE, RSC Advances 4 pp. 20185–20199 (2014) [doi: DOI: 10.1039/c4ra01111b]
  124. B. Gardelle, S. Duquesne, P. Vandereecken, S. Bourbigot, RESISTANCE TO FIRE OF SILICONE BASED COATINGS: FIRE PROTECTION OF STEEL AGAINST CELLULOSIC FIRE, Journal of Fire Sciences 32(4) 374–387 (2014) [doi: DOI: 10.1177/0734904114522390]
  123. R. Dupretz, G. Fontaine, S. Bourbigot, FIRE RETARDANCY OF A NEW POLYPROPYLENE-GRAFTED STARCH PART II: MECHANISMS OF FIRE RETARDANCY, Journal of Fire Sciences 32(3) pp. 210–229 (2014) [doi: DOI: 10.1177/0734904113508725]
  122. B. Lecouvet, M. Sclavons, S. Bourbigot, C. Bailly, HIGHLY LOADED POLYAMIDE 12/HALLOYSITE NANOCOMPOSITE FILMS AS FIRE PROTECTIVE COATING FOR POLYMERIC SUBSTRATES, Journal of Fire Sciences 32(2) pp. 145-164 (2014) [doi: DOI: 10.1177/0734904113500207]
  121. B. Lecouvet, M. Sclavons, S. Bourbigot, C. Bailly, TOWARDS SCALABLE PRODUCTION OF POLYAMIDE 12/HALLOYSITE NANOCOMPOSITES VIA WATER-ASSISTED EXTRUSION: MECHANICAL MODELLING, THERMAL AND FIRE PROPERTIES, Polymers for Advanced Technologies 25 137-151 (2014) [doi: 10.1002/pat.3215]
  120. K. Apaydin, A. Laachachi, V. Ball, M. Jimenez, S. Bourbigot, V. Toniazzo, D. Ruch, Intumescent coating of (polyallylamine-polyphosphates) deposited on polyamide fabrics via layer-by-layer technique, Polymer Degradation and Stability 106 158-164 (2014) [doi: 10.1016/j.polymdegradstab.2014.01.006]
  119. S. Duquesne, M. Jimenez, S. Bourbigot, Aging of the flame-retardant properties of polycarbonate and polypropylene protected by an intumescent coating, Journal of Applied Polymer Science 131(3) art n° 39566 (2014) [doi: 10.1002/app.39566]
• 2013
  118. R. Dupretz, G. Fontaine, S. Bourbigot, Fire retardancy of a new polypropylene-grafted starch, Journal of Fire Sciences 31 (6) 563-575 (2013) [doi: DOI: 10.1177/0734904113487491]
  117. S. Bourbigot, APPLICATIONS OF INTUMESCENCE FOR REACTION AND RESISTANCE TO FIRE OF MATERIALS, Materials China 32 9-15 (2013) [doi: 10.7502/j.issn.1674-3962.2013.03.02]
  116. A. D. Naik, G. Fontaine, F. Samyn, X. Delva, Y. Bourgeois, S. Bourbigot, MELAMINE INTEGRATED METAL PHOSPHATES AS NON-HALOGENATED FLAME RETARDANTS: SYNERGISM WITH ALUMINIUM PHOSPHINATE FOR FLAME RETARDANCY IN GLASS FIBER REINFORCED POLYAMIDE 66, Polymer Degradation and Stability (2013) [doi: 10.1016/j.polymdegradstab.2013.09.029]
  115. B. Lecouvet, M. Sclavons, C. Bailly, S. Bourbigot, A COMPREHENSIVE STUDY OF THE SYNERGISTIC FLAME RETARDANT MECHANISMS OF HALLOYSITE IN INTUMESCENT POLYPROPYLENE, Polymer Degradation and Stability (2013) [doi: 10.1016/j.polymdegradstab.2013.08.024]
  114. A. Gallos, G. Fontaine, S. Bourbigot, REACTIVE EXTRUSION OF STEREOCOMPLEXED POLY-L,D-LACTIDES: PROCESSING, CHARACTERIZATION AND PROPERTIES, Macromolecular Materials and Engineering 298(9) 1016-1023 (2013) [doi: 10.1002/mame.201200271]
  113. B. Lecouvet, M. Sclavons, S. Bourbigot, C. Bailly, THERMAL AND FLAMMABILITY PROPERTIES OF POLYETHERSULFONE/HALLOYSITE NANOCOMPOSITES PREPARED BY MELT COMPOUNDING, Polymer Degradation and Stability 98 1993-2004 (2013) [doi: 10.1016/j.polymdegradstab.2013.07.013]
  112. B. Gardelle, S. Duquesne, P. Vanderecken, S. Bourbigot, RESISTANCE TO FIRE OF INTUMESCENT SILICONE BASED COATING: THE ROLE OF ORGANOCLAY, Progress in Organic Coatings 71 1633-1641 (2013) [doi: 10.1016/j.porgcoat.2013.07.011]
  111. M. Muller, S. Bourbigot, S. Duquesne, R. Klein, G. Gianini, C. Lindsay, J. Vlassenbroeck, INVESTIGATION OF THE SYNERGY IN INTUMESCENT POLYURETHANE BY 3D COMPUTED TOMOGRAPHY, Polymer Degradation and Stability 98(9) 1638-1942 (2013) [doi: 10.1016/j.polymdegradstab.2013.06.018]
  110. B. Gardelle, S. Duquesne, P. Vanderecken, S. Bellayer, S. Bourbigot, RESISTANCE TO FIRE OF CURABLE SILICONE/EXPANDABLE GRAPHITE BASED COATING: EFFECT OF THE CATALYST, European Polymer Journal 49(8) 1633-1641 (2013) [doi: 10.1016/j.eurpolymj.2013.04.021]
  109. N. Tenn, N. Follain, J. Soulestin, R. Cretois, S. Bourbigot, S. Marais, EFFECT OF NANOCLAY HYDRATION ON BARRIER PROPERTIES OF PLA/MONTMORILLONITE BASED NANOCOMPOSITES, Journal of Physical Chemistry. Part C 117 (23) 12117-12135 (2013) [doi: 10.1021/jp401546t]
  108. K. Apaydin, A. Laachachi, V. Ball, M. Jimenez, S. Bourbigot, V. Toniazzo, D. Ruch, Polyallylamine–montmorillonite as super flame retardant coating assemblies by layer-by layer deposition on polyamide, Polymer Degradation and Stability 98 627-634 (2013) [doi: 10.1016/j.polymdegradstab.2012.11.006]
  107. S. Bourbigot, P. Bachelet, F. Samyn, M. Jimenez, S. Duquesne, Intumescence as method for providing fire resistance to structural composites: Application to poly(ethylene terephtalate) foam sandwich-structured composite, Composite Interfaces 20(4) 269-277 (2013) [doi: 10.1080/15685543.2013.793586]
  106. M. Muller, S. Bourbigot, S. Duquesne, R. Klein, G. Gianini, C. Lindsay, MEASUREMENT AND INVESTIGATION OF INTUMESCENT CHAR STRENGTH: APPLICATION TO POLYURETHANES, Journal of Fire Sciences 31(4) 293-308 (2013) [doi: 10.1177/0734904112472015]
  105. J. Louisy, S. Bourbigot, S. Duquesne, P. Desbois, A. König, M. Klatt, NOVEL SYNERGISTS FOR FLAME RETARDED GLASS-FIBER REINFORCED POLY(1,4-BUTYLENETEREPHTALATE), Polymery 58 403-412 (2013) [doi: 10.14314/polimery.2013.403]
  104. C. Hoffendahl, G. Fontaine, S. Bourbigot, FLAME RETARDANCY OF BIO-BASED POLYETHER-BLOCK-AMIDE POLYMER (PEBAX), Polymer Degradation and Stability 98(6) 1247-1255 (2013) [doi: 10.1016/j.polymdegradstab.2013.03.002]
  103. S. Duquesne, P. Bachelet, S. Bellayer, S. Bourbigot, W. Mertens, INFLUENCE OF INORGANIC FILLERS ON THE FIRE PROTECTION OF INTUMESCENT COATINGS, Journal of Fire Sciences 31 258-275 (2013) [doi: 10.1177/0734904112467291]
  102. B. Gardelle, S. Duquesne, P. Vanderecken, S. Bourbigot, CHARACTERIZATION OF THE CARBONIZATION PROCESS OF EXPANDABLE GRAPHITE/SILICONE FORMULATIONS IN A SIMULATED FIRE, Polymer Degradation and Stability 98(5) 1052-1063 (2013) [doi: 10.1016/j.polymdegradstab.2013.02.001]
  101. S. Bourbigot, O. Cérin, S. Duquesne, N. Clavel, Flame retardancy of bitumen: a calorimetric study, Journal of Fire Sciences 31(2) 109-127 (2013) [doi: 10.1177/0734904112458240]
  100. S. Bourbigot, L. Garnier, B. Revel, S. Duquesne, Characterization of the morphology of iPP/sPP blends with various compositions, eXpress Polymer Letters 7(3) 224-237 (2013) [doi: 10.3144/expresspolymlett.2013.21]
  99. A. Gallos, G. Fontaine, S. Bourbigot, Reactive extrusion of intumescent stereocomplexed poly L,D lactide : characterization and reaction to fire, Polymers for Advanced Technologies 24 130-133 (2013) [doi: 10.1002/pat.3058]
  98. B. Gardelle, S. Duquesne, V. Rerat, S. Bourbigot, Thermal degradation and fire performance of intumescent silicone-based coatings, Polymers for Advanced Technologies 24 62-69 (2013) [doi: 10.1002/pat.3050]
  97. M. Jimenez, S. Duquesne, S. Bourbigot, Enhanced fire retardant properties of glass-fiber reinforced Polyamide 6,6 by combining bulk and surface treatments: Toward a better understanding of the fire-retardant mechanism, Polymer Degradation and Stability 98 (7) 1378-1388 (2013) [doi: 10.1016/j.polymdegradstab.2013.03.026]
  96. M. Jimenez, S. Bellayer, B. Revel, S. Duquesne, S. Bourbigot, Comprehensive Study of the Influence of Different Aging Scenarios on the Fire Protective Behavior of an Epoxy Based Intumescent Coating, Industrial and Engineering Chemistry Research 52(2) 729-743 (2013) [doi: 10.1021/ie302137g]
  95. S. Duquesne, O. Cérin-Delaval, G. Fontaine, G. Tricot, S. Bourbigot, STUDY OF THE THERMAL DEGRADATION OF AN ALUMINIUM PHOSPHINATE - ALUMINIUM TRIHYDRATE COMBINATION, Thermochimica Acta 551 175-183 (2013) [doi: 10.1016/j.tca.2012.10.025]
  94. M. Vandenbossche, M. Jimenez, M. Casetta, S. Bellayer, A. Beaurain, S. Bourbigot, M. Traisnel, Chitosan-grafted nonwoven geotextile for heavy metal sorption in sediments, Reactive and Functional Polymers 73 53-59 (2013) [doi: 10.1016/j.reactfunctpolym.2012.09.002]
• 2012
  93. W. Liu, S. Zhang, S. Bourbigot, J. Sun, L. Yu, Q. Feng, X. Chen, X. Zhu, BURNING BEHAVIOR AND THERMAL DEGRADATION KINETICS OF SURFACE PHOTOGRAFTED POLYAMIDE 6.6 FABRIC, Polymers for Advanced Technologies 23(12) 1550-1554 (2012) [doi: DOI: 10.1002/pat.3028]
  92. B. Lecouvet, S. Bourbigot, M. Sclavons, C. Bailly, KINETICS OF THE THERMAL AND THERMO-OXIDATIVE DEGRADATION OF POLYPROPYLENE/HALLOYSITE NANOCOMPOSITES, Polymer Degradation and Stability 97(9) 1745-1754 (2012)
  91. C. Gérard, G. Fontaine, S. Bellayer, S. Bourbigot, REACTION TO FIRE OF AN INTUMESCENT EPOXY RESIN: PROTECTION MECHANISMS AND SYNERGY, Polymer Degradation and Stability 97(8) 1366-1386 (2012) [doi: DOI: 10.1016/j.polymdegradstab.2012.05.025]
  90. J. Soulestin, B. J. Rashmi, S. Bourbigot, M. F. Lacrampe, P. Krawczak, MECHANICAL AND OPTICAL PROPERTIES OF POLYAMIDE 6/CLAY NANOCOMPOSITE CAST FILMS: INFLUENCE OF THE DEGREE OF EXFOLIATION, Macromolecular Materials and Engineering 297(5) 444-454 (2012) [doi: DOI: 10.1002/mame.20110020]
  89. S. Alix, N. Follain, N. Tenn, B. Alexandre, S. Bourbigot, J. Soulestin, S. Marais, BARRIER PROPERTIES OF PA6 NANOCOMPOSITES WITH HIGHLY EXFOLIATED AND ORIENTED ORGANOCLAYS, Journal of Physical Chemistry. Part C 116 (8) 4937-4947 (2012) [doi: DOI: 10.1021/jp2052344]
  88. S. Bourbigot, P. Bachelet, M. Jimenez, S. Duquesne, Intumescent coating providing fire resistance to materials, European Coatings Journal 9 28-33 (2012)
  87. F. Samyn, S. Bourbigot, THERMAL DECOMPOSITION OF FLAME RETARDED FORMULATIONS PA6/ALUMINUM PHOSPHINATE/MELAMINE POLYPHOSPHATE/ORGANOMODIFIED CLAY: INTERACTIONS BETWEEN THE CONSTITUENTS?, Polymer Degradation and Stability 97(11) 2217–2230 (2012) [doi: http://dx.doi.org/10.1016/j.polymdegradstab.2012.08.004]
  86. M. Jimenez, H. Gallou, S. Duquesne, C. Jama, S. Bourbigot, X. Couillens, F. Speroni, New routes to flame retard PA6,6 for electrical applications, Journal of Fire Sciences 30 535-551 (2012) [doi: 10.1177/0734904112449992]
  85. M. Jimenez, S. Duquesne, S. Bourbigot, Fire protection of polypropylene and polycarbonate by intumescent coatings, Polymers for Advanced Technologies 23(1) 130-135 (2012) [doi: 10.1002/pat.1809]
• 2011
  84. O. Cérin, S. Duquesne, G. Fontaine, A. Roos, S. Bourbigot, THERMAL DEGRADATION OF ELASTOMERIC VULCANIZED POLY(ETHYLENE-CO-VINYLACETATE): CHEMICAL AND KINETIC INVESTIGATIONS, Polymer Degradation and Stability 96 1812-1820 (2011) [doi: doi:10.1016/j.polymdegradstab.2011.07.015]
  83. B. Lecouvet, M. Sclavons, S. Bourbigot, J. Devaux, C. Bailly, WATER-ASSISTED EXTRUSION AS A NOVEL PROCESSING ROUTE TO PREPARE POLYPROPYLENE/HALLOYSITE NANOTUBE NANOCOMPOSITES: STRUCTURE AND PROPERTIES, Polymer 52 4284-4295 (2011) [doi: doi:10.1016/j.polymer.2011.07.021]
  82. C. Gérard, G. Fontaine, S. Bourbigot, SYNERGISTIC AND ANTAGONISTIC EFFECTS IN FLAME RETARDANCY OF AN INTUMESCENT EPOXY RESIN, Polymers for Advanced Technologies 22 (7) 1085-1090 (2011) [doi: DOI: 10.1002/pat.1996]
  81. B. Gardelle, S. Duquesne, C. Vu, S. Bourbigot, THERMAL DEGRADATION AND FIRE PERFORMANCE OF POLYSILAZANE-BASED COATINGS, Thermochimica Acta 519 28-37 (2011) [doi: doi:10.1016/j.tca.2011.02.025]
  80. F. Salaün, M. Lewandowski, I. Vroman, G. Bedek, S. Bourbigot, DEVELOPMENT AND CHARACTERISATION OF FLAME-RETARDANT FIBRES FROM ISOTACTIC POLYPROPYLENE MELT-COMPOUNDED WITH MELAMINE-FORMALDEHYDE MICROCAPSULES, Polymer Degradation and Stability 96 131-143 (2011) [doi: doi:10.1016/j.polymdegradstab.2010.10.009]
  79. S. Bourbigot, G. Fontaine, A. Gallos, S. Bellayer, Reactive extrusion of PLA and of PLA/carbon nanotubes nanocomposite: Processing, characterization and flame retardancy, Polymers for Advanced Technologies 22(1) 30-37 (2011) [doi: DOI: 10.1002/pat.1715]
  78. S. Bellayer, E. Tavard, S. Duquesne, A. Piechaczyk, S. Bourbigot, Natural mineral fire retardant fillers for polyethylene, Fire and Materials 35(3) 183-192 (2011) [doi: DOI: 10.1002/fam.1048]
  77. M. Casetta, D. Delaval, M. Traisnel, S. Bourbigot, Reprocessed high impact polypropylene containing oil pollutant exhibiting flame retardant properties, Macromolecular Symposia 301(1) 31-39 (2011) [doi: DOI: 10.1002/masy.201150305]
  76. M. Casetta, D. Delaval, M. Traisnel, S. Bourbigot, Influence of the recycling process on the fire-retardant properties of PP/EPR blends, Macromolecular Materials and Engineering 296(6) 494-505 (2011) [doi: DOI: 10.1002/mame.201000334]
• 2010
  75. M. Jimenez, S. Duquesne, S. Bourbigot, Keeping cool in the mass-Waterborne intumescent coatings can prevent thermoplastics from burning., European Coatings Journal 10 26-31 (2010)
  74. S. Bourbigot, G. Fontaine, Flame retardancy of polylactide: an overview, Polymer Chemistry 1 1413-1422 (2010) [doi: 10.1039/c0py00106f]
  73. L. Garnier, S. Duquesne, S. Bourbigot, Melt spinning of silane-water cross-linked polyethylene-octene through a reactive extrusion process, Reactive and Functional Polymers 70 775-783 (2010) [doi: 10.1016/j.reactfunctpolym.2010.07.004]
  72. M. Jimenez, S. Bellayer, S. Duquesne, S. Bourbigot, Improvement of heat resistance of high performance fibers using a cold plasma polymerization process, Surface and Coatings Technology 205 745-758 (2010) [doi: 10.1016/j.surfcoat.2010.07.091]
  71. I. Vroman, S. Giraud, F. Salaün, S. Bourbigot, POLYPROPYLENE FABRICS PADDED WITH MICROENCAPSULATED AMMONIUM PHOSPHATE: EFFECT OF THE SHELL STRUCTURE ON THE THERMAL STABILITY AND FIRE PERFORMANCE, Polymer Degradation and Stability 95 315-319 (2010) [doi: DOI: 10.1016/j.polymdegradstab.2010.05.019]
  70. C. Gérard, G. Fontaine, S. Bourbigot, NEW TRENDS IN REACTION AND RESISTANCE TO FIRE OF FIRE-RETARDED EPOXIES, Materials 3 4476-4499 (2010) [doi: DOI:10.3390/ma3084476]
  69. Z. Sebih, S. Bourbigot, R. Delobel, F. Poutch, QUANTITATIVE ANALYSIS OF AUTOMOTIVE EXHAUST GAS BY FOURIER TRANSFORM INFRARED SPECTROSCOPY, International Journal of Environmental Technology and Management 13(2) 188-205 (2010) [doi: DOI: 10.1504/IJETM.2010.034301]
  68. F. Salaün, E. Devaux, S. Bourbigot, P. Rumeau, THERMOREGULATING RESPONSE OF COTTON FABRIC CONTAINING MICROENCAPSULATED PHASE CHANGE MATERIALS, Thermochimica Acta 506(1-2) 82-93 (2010) [doi: DOI: 10.1016/j.tca.2010.04.020]
  67. M. Murariu, A. L. Dechief, L. Bonnaud, P. Yoann, A. Gallos, G. Fontaine, S. Bourbigot, P. Dubois, THE PRODUCTION AND PROPERTIES OF POLYLACTIDE COMPOSITES FILLED WITH EXPANDED GRAPHITE, Polymer Degradation and Stability 95 889-900 (2010) [doi: DOI: 10.1016/j.polymdegradstab.2009.12.019]
  66. M. Murariu, L. Bonnaud, P. Yoann, G. Fontaine, S. Bourbigot, P. Dubois, NEW TRENDS IN POLYLACTIDE (PLA)-BASED MATERIALS: “GREEN” PLA–CALCIUM SULFATE (NANO)COMPOSITES TAILORED WITH FLAME RETARDANT PROPERTIES, Polymer Degradation and Stability 95 374-381 (2010) [doi: doi:10.1016/j.polymdegradstab.2009.11.032]
  65. S. Bourbigot, F. Samyn, T. Turf, S. Duquesne, NANOMORPHOLOGY AND REACTION TO FIRE OF POLYURETHANE AND POLYAMIDE NANOCOMPOSITES CONTAINING FLAME RETARDANTS, Polymer Degradation and Stability 95 320-326 (2010) [doi: 10.1016/j.polymdegradstab.2009.11.011]
  64. S. Giraud, F. Salaün, G. Bedek, I. Vroman, S. Bourbigot, INFLUENCE OF CHEMICAL SHELL STRUCTURE ON THE THERMAL PROPERTIES OF MICROCAPSULES CONTAINING A FLAME RETARDANT AGENT, Polymer Degradation and Stability 95 315-319 (2010) [doi: 10.1016/j.polymdegradstab.2009.11.018]
  63. L. Urbanczyk, S. Bourbigot, C. Calberg, C. Detrembleur, C. Jérôme, F. Boschini, M. Alexandre, PREPARATION OF FIRE-RESISTANT POLY(STYRENE-CO-ACRYLONITRILE) FOAMS USING THE SUPERCRITICAL CO2 TECHNOLOGY, Journal of Materials Chemistry 20 1567-1576 (2010) [doi: 10.1039/b917539c]
  62. F. Salaün, E. Devaux, S. Bourbigot, P. Rumeau, INFLUENCE OF THE SOLVENT ON THE MICROENCAPSULATION OF A HYDRATED SALT, Carbohydrate Polymers 79(4) 964-974 (2010) [doi: 10.1016/j.carbpol.2009.10.027]
  61. M. Mainil, L. Urbanczyk, C. Calberg, A. Germain, C. Jérôme, S. Bourbigot, J. Devaux, M. Sclavons, MORPHOLOGY AND PROPERTIES OF SAN-CLAY NANOCOMPOSITES PREPARED PRINCIPALLY BY WATER-ASSISTED EXTRUSION, Polymer Engineering & Science 50 10-21 (2010) [doi: 10.1002/pen.21501]
• 2009
  60. S. Nazare, T. R. Hull, B. Biswas, F. Samyn, S. Bourbigot, C. Jama, A. Castrovinci, A. Fina, G. Camino, Study of the relationship between flammability and melt rheological properties of flame-retarded poly(butylene terephthalate) containing nanoclays, Fire Retardancy of Polymers: New Strategies and Mechanisms 168-183 (2009)
  59. F. Salaün, E. Devaux, P. Rumeau, S. Bourbigot, INFLUENCE OF PROCESS PARAMETERS ON MICROCAPSULES LOADED WITH N-HEXADECANE PREPARED BY IN SITU POLYMERIZATION, Chemical Engineering Journal 155 457-465 (2009) [doi: 10.1016/j.cej.2009.07.018]
  58. A. Vannier, S. Duquesne, S. Bourbigot, J. Alongi, G. Camino, R. Delobel, INVESTIGATION OF THE THERMAL DEGRADATION OF PET, ZINC PHOSPHINATE, OMPOSS AND THEIR BLENDS, Thermochimica Acta 495 155–166 (2009) [doi: 10.1016/j.tca.2009.06.013]
  57. J. Zhang, M. A. Delichatsios, S. Bourbigot, EXPERIMENTAL AND NUMERICAL STUDY OF THE EFFECTS OF NANOPARTICLES ON PYROLYSIS OF A POLYAMIDE-6 NANOCOMPOSITE IN THE CONE CALORIMETER, Combustion and Flame 156(11) 2056-2062 (2009) [doi: 10.1016/j.combustflame.2009.08.002]
  56. C. Reti, M. Casetta, S. Duquesne, R. Delobel, J. Soulestin, S. Bourbigot, INTUMESCENT BIOBASED-POLYLACTIDE FILMS TO FLAME RETARD NONWOVENS, Journal of Engineered Fibers and Fabrics 4(2) 33-39 (2009)
  55. G. Fontaine, S. Bourbigot, INTUMESCENT PLA : A NON FLAMMABLE MATERIAL, Journal of Applied Polymer Science 113(6) 3860-3865 (2009) [doi: 10.1002/app.30379]
  54. F. Salaün, E. Devaux, P. Rumeau, S. Bourbigot, APPLICATION OF CONTACT ANGLE MEASUREMENT TO THE MANUFACTURE OF TEXTILES CONTAINING MICROCAPSULES, Textile Research Journal 79(13) 1202-1212 (2009) [doi: 10.1177/0040517508100724]
  53. F. Raut, E. Pleyber, C. Campagne, M. Rochery, S. Giraud, S. Bourbigot, E. Devaux, EFFECT OF MANGANESE NANOPARTICLES ON THE MECHANICAL, THERMAL AND FIRE PROPERTIES OF POLYPROPYLENE MULTIFILAMENT YARN, Polymer Degradation and Stability 94 955–964 (2009) [doi: 10.1016/j.polymdegradstab.2009.03.012]
  52. S. Bourbigot, T. Turf, S. Bellayer, S. Duquesne, POLYHEDRAL OLIGOMERIC SILSESQUIOXANE AS FLAME RETARDANT FOR THERMOPLASTIC POLYURETHANE, Polymer Degradation and Stability 94 1230–1237 (2009) [doi: 10.1016/j.polymdegradstab.2009.04.016]
  51. S. Benali, A. Olivier, P. Brocorens, L. Bonnaud, M. Alexandre, S. Bourbigot, E. Espuche, F. Gouanvé, R. Lazzaroni, P. Dubois, FIRE AND GAS BARRIER PROPERTIES OF POLY(STYRENE-CO-ACRYLONITRILE) NANOCOMPOSITES USING POLYCAPROLACTONE/CLAY NANOHYBRID BASED-MASTERBATCH, Advances in Materials Science and Engineering 2008, Article ID 394235 11 (2009) [doi: 10.1155/2008/394235]
  50. D. Delaval, M. Casetta, R. Delobel, M. Traisnel, J. Guillet, C. Raveyre, S. Bourbigot, THERMAL AND FIRE DEGRADATION OF RECYCLED AND POLLUTED POLYPROPYLENE-BASED MATERIALS, Journal of Applied Polymer Science 112 2270–2279 (2009) [doi: 10.1002/app.29775]
  49. S. Bellayer, E. Tavard, S. Duquesne, A. Piechaczyk, S. Bourbigot, MECHANISM OF INTUMESCENCE OF A POLYETHYLENE/CALCIUM CARBONATE/STEARIC ACID SYSTEM, Polymer Degradation and Stability 94(5) 797-803 (2009) [doi: 10.1016/j.polymdegradstab.2009.01.032]
  48. J. Zhang, J. Hereid, M. Hagen, D. Bakirtzis, M. A. Delichatsios, A. Fina, A. Castrovinci, G. Camino, F. Samyn, S. Bourbigot, EFFECTS OF NANOCLAY AND FIRE RETARDANTS ON FIRE RETARDANCY OF A POLYMER BLEND OF EVA AND LDPE, Fire Safety Journal 44 504-513 (2009) [doi: 10.1016/j.firesaf.2008.10.005]
  47. E. Naveau, C. Calberg, C. Detrembleur, S. Bourbigot, C. Jérôme, M. Alexandre, SUPERCRITICAL CO2 AS AN EFFICIENT MEDIUM FOR LAYERED SILICATE ORGANOMODIFICATION: PREPARATION OF THERMALLY STABLE ORGANOCLAYS AND DISPERSION IN POLYAMIDE 6, Polymer 50 1438-1446 (2009) [doi: 10.1016/j.polymer.2009.01.040]
  46. V. Mamleev, S. Bourbigot, M. L. Bras, J. Yvon, THE FACTS AND HYPOTHESES RELATING TO THE PHENOMENOLOGICAL MODEL OF CELLULOSE PYROLYSIS. INTERDEPENDENCE OF THE STEPS, Journal of Analytical and Applied Pyrolysis 84(1) 1-17 (2009) [doi: DOI: 10.1016/j.jaap.2008.10.014]
  45. M. Jimenez, S. Duquesne, S. Bourbigot, KINETIC ANALYSIS OF THE THERMAL DEGRADATION OF AN EPOXY BASED INTUMESCENT COATING, Polymer Degradation and Stability 94 404-409 (2009) [doi: 10.1016/j.polymdegradstab.2008.11.021]
  44. L. Garnier, S. Duquesne, R. Delobel, S. Bourbigot, NON-ISOTHERMAL CRYSTALLIZATION OF iPP/sPP BLENDS, Thermochimica Acta 481(1-2) 32-45 (2009) [doi: 10.1016/j.tca.2008.10.006]
• 2008
  43. F. Samyn, S. Bourbigot, C. Jama, S. Bellayer, S. Nazare, R. Hull, A. Fina, A. Castrovinci, G. Camino, Characterisation of the dispersion in polymer flame retarded nanocomposites, European Polymer Journal 44 1631-1641 (2008) [doi: 10.1016/j.eurpolymj.2008.03.018]
  42. F. Samyn, S. Bourbigot, C. Jama, S. Bellayer, Flame retardancy of polymer clay nanocomposite: is there an influence of the nanomorphology?, Polymer Degradation and Stability 93 2019-2024 (2008) [doi: 10.1016/j.polymdegradstab.2008.02.013]
  41. F. Salaün, E. Devaux, S. Bourbigot, P. Rumeau, P. O. Chapuis, S. K. Saha, S. Volz, POLYMER NANOPARTICLES TO DECREASE THERMAL CONDUCTIVITY OF PHASE CHANGE MATERIALS, Thermochimica Acta 477 25-31 (2008) [doi: 10.1016/j.tca.2008.07.006]
  40. L. Urbanczyk, C. Calberg, S. Benali, S. Bourbigot, E. Espuche, F. Gouanvé, P. Dubois, A. Germain, C. Jérôme, C. Detrembleur, M. Alexandre, POLY(CAPROLACTONE)/CLAY MASTERBATCHES PREPARED IN SUPERCRITICAL CO2 AS EFFICIENT CLAY DELAMINATION PROMOTERS IN POLY(STYRENE-CO-ACRYLONITRILE), Journal of Materials Chemistry 18 4623-4630 (2008) [doi: 10.1039/b807357k]
  39. P. Bordes, E. Pollet, S. Bourbigot, L. Avérous, Structure and properties of PHA/clay nano-biocomposites prepared by melt intercalation, Macromolecular Chemistry and Physics 209 1473-1484 (2008) [doi: 10.1002/macp.200800022]
  38. X. Almeras, P. Vandendaele, A. Vannier, S. Duquesne, S. Bourbigot, R. Delobel, M. Ortiz, G. Gupta, E. Pivotto, New halogen free masterbatch for PET fibers, Chemical Fibers International 58, Issue 3 178-181 (2008)
  37. G. Fontaine, S. Bourbigot, S. Duquesne, Neutralized flame retardant phosphorus agent: facile synthesis, reaction to fire in PP and synergy with zinc borate, Polymer Degradation and Stability 93 68-76 (2008) [doi: 10.1016/j.polymdegradstab.2007.10.019]
  36. S. Bourbigot, S. Duquesne, A. Vannier, R. Delobel, Nonwoven as heat barrier: modeling of the efficiency of Carbtex fibers, Journal of Applied Polymer Science 108 3245-3255 (2008) [doi: 10.1002/app.28015 00218995]
  35. A. Vannier, S. Duquesne, S. Bourbigot, R. Delobel, A. Castrovinci, G. Camino, The use of POSS as synergist in intumescent recycled PET, Polymer Degradation and Stability 93 818-826 (2008) [doi: 10.1016/j.polymdegradstab.2008.01.016]
  34. S. Solarski, M. Ferreira, E. Devaux, G. Fontaine, P. Bachelet, S. Bourbigot, R. Delobel, P. Coszach, M. Murariu, A. Da Silva Ferreira, M. Alexandre, P. Degee, P. Dubois, Designing polylactide/clay nanocomposites for textile applications: effect of processing conditions, spinning and characterization, Journal of Applied Polymer Science 109 841–851 (2008) [doi: 10.1002/app.28138]
  33. F. Salaün, E. Devaux, S. Bourbigot, P. Rumeau, Preparation of multinuclear microparticles using a polymerization in emulsion process, Journal of Applied Polymer Science 107 2444-2452 (2008) [doi: 10.1002/app.27283 00218995]
  32. F. Samyn, S. Bourbigot, C. Jama, S. Bellayer, S. Nazare, R. Hull, A. Castrovinci, A. Fina, G. Camino, Crossed characterisation of polymer-layered silicate (PLS) nanocomposite morphology: TEM, X-Ray Diffraction, Rheology and solid-state Nuclear Magnetic Resonance measurements, European Polymer Journal 44 1642–1653 (2008) [doi: 10.1016/j.eurpolymj.2008.03.021]
  31. S. Bourbigot, G. Fontaine, S. Duquesne, R. Delobel, PLA nanocomposite: quantification of clay nanodispersion and reaction to fire, International Journal of Nanotechnology 5 683-692 (2008) [doi: 10.1504/IJNT.2008.018690]
  30. S. Bourbigot, G. Fontaine, S. Bellayer, R. Delobel, Processing and nanodispersion: a quantitative approach for polylactide nanocomposite, Polymer Testing 27 2-10 (2008) [doi: 10.1016/j.polymertesting.2007.07.008]
  29. F. Salaün, E. Devaux, S. Bourbigot, P. Rumeau, Development of a precipitation method intended for the entrapment of hydrated salt, Carbohydrate Polymers 73 231-240 (2008) [doi: 10.1016/j.carbpol.2007.11.020]
  28. S. Duquesne, F. Samyn, S. Bourbigot, P. Amigouet, F. Jouffret, K. Shen, Influence of talc on the fire retardant properties of highly filled intumescent polypropylene composites, Polymers for Advanced Technologies 19 620–627 (2008) [doi: 10.1002/pat.1127]
  27. S. Bourbigot, S. Duquesne, G. Fontaine, S. Bellayer, T. Turf, F. Samyn, characterization and reaction to fire of polymer nanocomposites with and without conventional flame retardants, Molecular Crystals & Liquid Crystals 486 325-339 (2008) [doi: 10.1080/15421400801921983]
  26. C. Reti, M. Casetta, S. Duquesne, S. Bourbigot, R. Delobel, Flammability properties of intumescent PLA including starch and lignin, Polymers for Advanced Technologies 19 628–635 (2008) [doi: 10.1002/pat.1130]
• 2007
  25. R. Kozlowski, D. Wesolek, M. Wladyka-Przybylak, S. Duquesne, A. Vannier, S. Bourbigot, R. Delobel, Intumescent flame-retardant treatments for flexible barriers, Springer series in Materials Science 97 39-61 (2007)
  24. S. Bourbigot, S. Duquesne, Fire retardant polymers: recent developments and opportunities, Journal of Materials Chemistry 17 2283–2300 (2007) [doi: 10.1039/b702511d]
  23. S. Solarski, F. Mahjoubi, M. Ferreira, E. Devaux, P. Bachelet, S. Bourbigot, R. Delobel, M. Murariu, A. D. S. Ferreira, M. Alexandre, P. Degée, P. Dubois, Plasticized polylactide nanocomposite textile: thermal properties, shrinkage and fire properties, Journal of Material Science 42 5105–5117 (2007) [doi: 10.1007/s10853-006-0911-0]
  22. V. Mamleev, S. Bourbigot, J. Yvon, Kinetic analysis of the thermal decomposition of cellulose: the main step of mass loss, Journal of Analytical and Applied Pyrolysis 80 151-165 (2007) [doi: 10.1016/j.jaap.2007.01.013]
  21. S. Bellayer, J. W. Gilman, S. S. Rahatekar, S. Bourbigot, X. Flambard, L. M. Hanssen, H. Guo, S. Kumar, Characterization of SWCNT and PAN/SWCNT films, Carbon 45 2417-2423 (2007) [doi: 10.1016/j.carbon.2007.06.057]
  20. F. Samyn, S. Bourbigot, S. Duquesne, R. Delobel, Effect of Zinc borate on the thermal degradation of ammonium polyphosphate, Thermochimica Acta 456 134–144 (2007) [doi: 10.1016/j.tca.2007.02.006]
  19. V. Mamleev, S. Bourbigot, J. Yvon, Kinetic analysis of the thermal decomposition of cellulose: the change of the rate limitation, Journal of Analytical and Applied Pyrolysis 80 141-150 (2007) [doi: 10.1016/j.jaap.2007.01.012]
• 2006
  18. V. Mamleev, S. Bourbigot, M. Le Bras, J. Yvon, J. Lefebvre, Model-free method for evaluation of activation energies in modulated thermogravimetry and analysis of cellulose decomposition, Chemical Engineering Science 61 1276-1292 (2006) [doi: 10.1016/j.ces.2005.07.040]
  17. M. Jimenez, S. Duquesne, S. Bourbigot, High throughput fire testing for intumescent coating, Industrial and Engineering Chemistry Research 45 7475-7481 (2006) [doi: 10.1021/ie0608410]
  16. P. Ducroq, S. Duquesne, S. Magnet, S. Bourbigot, R. Delobel, Interactions between chlorinated paraffins and melamine in intumescent paint - Investing a way to suppress chlorinated paraffins from the formulations, Progress in Organic Coatings 57 430-438 (2006) [doi: 10.1016/j.porgcoat.2006.10.002]
  15. S. Fourdrin, M. Rochery, L. Gengembre, P. Rumeau, M. Lewandowski, M. Ferreira, S. Bourbigot, Effect of spin finish on fiber/binder adhesion in chemically bonded nonwovens, Journal of Applied Polymer Science 102 4092-4100 (2006) [doi: 10.1002/app.24098]
  14. E. Lecoeur, I. Vroman, S. Bourbigot, R. Delobel, Optimization of monoguanidine dihydrogen phosphate and amino propylethoxysilane based flame retardant formulations for cotton, Polymer Degradation and Stability 91 1909-1914 (2006) [doi: 10.1016/j.polymdegradstab.2005.10.015]
  13. D. Saihi, I. Vroman, S. Giraud, S. Bourbigot, Microencapsulation of ammonium phosphate with a polyurethane shell - Part II: Interfacial polymerization technique, Reactive and Functional Polymer 66 1118-1125 (2006) [doi: 10.1016/j.reactfunctpolym.2006.02.001]
  12. M. Jimenez, S. Duquesne, S. Bourbigot, Characterization of the performance of an intumescent fire protective coating, Surface and Coatings Technology 201 979-987 (2006) [doi: 10.1016/j.surfcoat.2006.01.026]
  11. S. Bourbigot, S. Duquesne, C. Jama, Polymer nanocomposite: How to reach low flammability?, Macromolecular Symposia 233 180-190 (2006) [doi: 10.1002/masy.200690016]
  10. M. Jimenez, S. Duquesne, S. Bourbigot, Multiscale Experimental Approach for Developing High-Performance Intumescent Coatings, Industrial and Engineering Chemistry Research 45 4500-4508 (2006) [doi: 10.1021/ie060040x]
  9. F. Belva, S. Bourbigot, S. Duquesne, M. Le Bras, C. Jama, C. Pelegris, M. Rivenet, Heat and fire resistance of polyurethane – polydimethylsiloxane hybrid material, Polymers for Advanced Technologies 17 304-311 (2006) [doi: 10.1002/pat.689]
  8. M. Jimenez, S. Duquesne, S. Bourbigot, Intumescent fire protective coating: toward a better understanding of their mechanism of action, Thermochimica Acta 449 16-26 (2006) [doi: 10.1016/j.tca.2006.07.008]
  7. S. Fourdrin, M. Rochery, M. Lewandowski, M. Ferreira, S. Bourbigot, Rheological and thermogravimetric studies of the crosslinking process of functionalised acrylic latexes, Journal of Applied Polymer Science 99 1117-1123 (2006) [doi: 10.1002/app.22281]
• 2005
  6. S. Bellayer, J. W. Gilman, N. Eidelmen, S. Bourbigot, X. Flambard, D. M. Fox, H. C. De Long, P. C. Trulove, Preparation of homogeneously dispersed multiwalled carbon nanotube/polystyrene nanocomposites via melt extrusion using trialkyl imidazolium compatibilizer, Advanced Functional Materials 15 910-916 (2005) [doi: 10.1002/adfm.200400441]
  5. J. Lefebvre, V. Mamleev, M. Le Bras, S. Bourbigot, Kinetic analysis of pyrolysis of cross-linked polymers, Polymer Degradation and Stability 88 85-91 (2005) [doi: 10.1016/j.polymdegradstab.2004.02.020]
  4. X. Flambard, S. Bourbigot, R. Kozlowski, M. Muzyczek, B. Mieleniak, M. Ferreira, B. Vermeulen, F. Poutch, Progress in safety, flame retardant textiles and flexible fire barriers for seats in transportation, Polymer Degradation and Stability 88 98-105 (2005) [doi: 10.1016/j.polymdegradstab.2004.02.024]
  3. V. Mamleev, S. Bourbigot, Modulated Thermogravimetric in Analysis of Decomposition Kinetics, Chemical Engineering Science 60 747-766 (2005) [doi: 10.1016/j.ces.2004.08.044]
  2. S. Giraud, S. Bourbigot, M. Rochery, I. Vroman, L. Tighzert, R. Delobel, F. Poutch, Flame retarted polyurea with encapsulated ammonium phosphate for textile coating, Polymer Degradation and Stability 88 106-113 (2005) [doi: 10.1016/j.polymdegradstab.2004.01.028]
  1. D. Saihi, I. Vroman, S. Giraud, S. Bourbigot, Microencapsulation of ammonium phosphate with a polyurethane shell - Part I: coacervation technique, Reactive and Functional Polymer 64 127-138 (2005) [doi: 10.1016/j.reactfunctpolym.2005.05.004]