Français - English
Unité Matériaux et Transformations

Unité Matériaux et Transformations
CNRS UMR 8207 - Université Lille 1

Directeur : Alexandre Legris

Directeur adjoint : Patrice Woisel

Secrétariat Tél : +33 (0) 320 43 49 67
Fax : + 33 (0) 320 43 65 91
Courriel: secretariat-umet@univ-lille1.fr

Gloaguen Jean-Michel
Jean-Michel Gloaguen
Professeur
Bâtiment C6 - 205
Unité Matériaux et Transformations
Bât. C6
Université Lille1
59655 Villeneuve d'Ascq
France
Tel: +33 (0)3 20 33 71 24
Fax: +33 (0) 320 43 65 91
Courriel: Jean-Michel.Gloaguen@univ-lille1.fr

Thèses soutenues

  • Saadia Ouchiar, Étude des relations structure – propriétés physiques de composites verts biopolymère/argile : Effet de la nature et de la teneur en renfort. Thèse soutenue en 2016. Co-directeurs: Grégory Stoclet, Cyrille Cabaret, Vincent Gloaguen. Situation actuelle: Ingénieure développement chez MacoPharma.
  • J Soulestin, Elaboration et comportement mécanique de nanocomposites à matrice PMMA et renfort plaquettaires . Thèse soutenue en 2004. Co-directeur: Jean-Marc Lefebvre. Situation actuelle: Maitre de conférence, Ecole des mines de Douai.

Brevets

  1. 2013 - B. Hue, J. M. Gloaguen: Suivi de la striction d'un matériau quel que soit son aspect par deux caméras 3D.
    Brevet FR n°1360061 déposé le 16/10/2013
  2. 2006 - R. Delobel, S. Duquesne, J. M. Gloaguen, C. Jama, J. M. Lefebvre, P. Bardollet: Polymer matrix composites comprising a two-filler population .
    WO2006018495 (A1)par CNRS

Communications récentes

4 communication(s) orale(s). 2 communication(s) par affiche. Liste détaillée.

Publications récentes

  • 2015
    1. K. Anoukou, A. Zaoui, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, Structural and thermodynamics properties of organo-modified montmorillonite clay, Physica E: Low-dimensional Systems and Nanostructures 65 56-60 (2015) [doi: 10.1016/j.physe.2014.07.025]
  • 2014
    1. A. Mesbah, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, K. Anoukou, A. Zaoui, Z. Qu, T. Boukharouba, J. M. Lefebvre, Micromechanics-based constitutive modeling of plastic yielding and damage mechanisms in polymer–clay nanocomposites: Application to polyamide-6 and polypropylene-based nanocomposites, Composites Science and Technology 101 71-78 (2014) [doi: 10.1016/j.compscitech.2014.05.032]
    2. K. Anoukou, F. Zaïri, M. Naït-abdelaziz, A. Zaoui, Z. Qu, J. M. Gloaguen, J. M. Lefebvre, A micromechanical model taking into account the contribution of α- and γ-crystalline phases in the stiffening of polyamide 6-clay nanocomposites: A closed-formulation including the crystal symmetry, Composites Part B: Engineering 64 84-96 (2014) [doi: 10.1016/j.compositesb.2014.01.012]
    3. G. Ayoub, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, G. Kridli, A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory, International Journal of Plasticity 54 19-33 (2014) [doi: 10.1016/j.ijplas.2013.08.001]
    4. F. Bouaksa, C. Ovalle rodas, F. Zaïri, G. Stoclet, M. Naït-abdelaziz, J. M. Gloaguen, T. Tamine, J. M. Lefebvre, Molecular chain orientation in polycarbonate during equal channel angular extrusion: Experiments and simulations, Computational Materials Science 85 244-252 (2014) [doi: 10.1016/j.commatsci.2013.12.028]
    5. K. Hachour, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, M. Aberkane, J. M. Lefebvre, Experiments and modeling of high-crystalline polyethylene yielding under different stress states, International Journal of Plasticity 54 1-18 (2014) [doi: 10.1016/j.ijplas.2013.06.004]
  • 2013
    1. M. Elmeguenni, M. Naït-abdelaziz, F. Zaïri, J. M. Gloaguen, Fracture characterization of high-density polyethylene pipe materials using the J-integral and the essential work of fracture, INTERNATIONAL JOURNAL OF FRACTURE 183 119-133 (2013) [doi: 10.1007/s10704-013-9848-x]
    2. K. Anoukou, A. Zaoui, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, Molecular dynamics study of the polymer clay nanocomposites (PCNs): Elastic constants and basal spacing predictions, Computational Materials Science 77 417-423 (2013) [doi: 10.1016/j.commatsci.2013.04.015]
  • 2012
    1. G. Ayoub, M. Naït-abdelaziz, F. Zaïri, J. M. Gloaguen, P. Charrier, Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: Effects of two-blocks loading and R ratio, Mechanics of Materials 52 87-102 (2012) [doi: 10.1016/j.mechmat.2012.03.012]
  • 2011
    1. G. Ayoub, M. Naït-abdelaziz, F. Zaïri, J. M. Gloaguen, P. Charrier, A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading, International Journal of Solids and Structures 48 2458-2466 (2011) [doi: 10.1016/j.ijsolstr.2011.04.003]
    2. F. Zaïri, J. M. Gloaguen, M. Naït-abdelaziz, A. Mesbah, J. M. Lefebvre, Study of the effect of size and clay structural parameters on the yield and post-yield response of polymer/clay nanocomposites via a multiscale micromechanical modelling, Acta Materialia 59 3851-3863 (2011) [doi: 10.1016/j.actamat.2011.03.009]
    3. G. Ayoub, F. Zaïri, C. Fréderix, J. M. Gloaguen, M. Naït-abdelaziz, R. Seguela, J. M. Lefebvre, Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling, International Journal of Plasticity 27 492-511 (2011) [doi: 10.1016/j.ijplas.2010.07.005]
    4. G. Ayoub, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: Application to styrene-butadiene rubber, Journal of the Mechanics and Physics of Solids 59 473-495 (2011) [doi: 10.1016/j.jmps.2010.09.016]
    5. K. Anoukou, F. Zaïri, M. Naït-abdelaziz, A. Zaoui, T. Messager, J. M. Gloaguen, On the overall elastic moduli of polymer–clay nanocomposite materials using a self-consistent approach. Part I: Theory, Composites Science and Technology 71 197-205 (2011) [doi: 10.1016/j.compscitech.2010.11.018]
    6. K. Anoukou, F. Zaïri, M. Naït-abdelaziz, A. Zaoui, T. Messager, J. M. Gloaguen, On the overall elastic moduli of polymer–clay nanocomposite materials using a self-consistent approach. Part II: Experimental verification, Composites Science and Technology 71 206-215 (2011) [doi: 10.1016/j.compscitech.2010.11.020]
    7. F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, J. M. Lefebvre, A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation, International Journal of Plasticity 27 25-51 (2011) [doi: 10.1016/j.ijplas.2010.03.007]
  • 2010
    1. S. Belbachir, F. Zaïri, G. Ayoub, U. Maschke, M. Naït-abdelaziz, J. M. Gloaguen, M. Benguediab, J. M. Lefebvre, Modelling of photodegradation effect on elastic–viscoplastic behaviour of amorphous polylactic acid films, Journal of the Mechanics and Physics of Solids 58 241-255 (2010) [doi: 10.1016/j.jmps.2009.10.003]
    2. G. Ayoub, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, Modelling large deformation behaviour under loading–unloading of semicrystalline polymers: Application to a high density polyethylene, International Journal of Plasticity 26 329-347 (2010) [doi: 10.1016/j.ijplas.2009.07.005]
    3. G. Ayoub, M. Naït-abdelaziz, F. Zaïri, J. M. Gloaguen, Multiaxial fatigue life prediction of rubber-like materials using the continuum damage mechanics approach, Procedia Engineering 2 985-993 (2010) [doi: 10.1016/j.proeng.2010.03.107]
    4. G. Ayoub, F. Zaïri, C. Fréderix, J. M. Gloaguen, M. Naït-abdelaziz, R. Seguela, J. M. Lefebvre, Modelling finite deformation stress-strain response during loadingunloading of polyethylene over a wide range of crystallinities, Procedia Engineering 2 977-984 (2010) [doi: 10.1016/j.proeng.2010.03.106]
    5. F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, J. M. Lefebvre, Constitutive modelling of the large inelastic deformation behaviour of rubber-toughened poly(methyl methacrylate): effects of strain rate, temperature and rubber-phase volume fraction, Modelling and Simulation in Materials Science and Engineering 18 055004 (2010) [doi: 10.1088/0965-0393/18/5/055004]
  • 2009
    1. S. Boutaleb, F. Zaïri, A. Mesbah, M. Naït-abdelaziz, J. M. Gloaguen, T. Boukharouba, J. M. Lefebvre, Micromechanics-based modelling of stiffness and yield stress for silica/polymer nanocomposites, International Journal of Solids and Structures 46 1716-1726 (2009) [doi: 10.1016/j.ijsolstr.2008.12.011]
    2. B. Aour, F. Zaïri, R. Boulahia, M. Naït-abdelaziz, J. M. Gloaguen, J. M. Lefebvre, Experimental and numerical study of ECAE deformation of polyolefins, Computational Materials Science 45 646-652 (2009) [doi: 10.1016/j.commatsci.2008.08.020]
    3. B. Aour, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, J. M. Lefebvre, Finite Element Analysis of Plastic Strain Distribution in Multipass ECAE Process of High Density Polyethylene, Journal of Manufacturing Science and Engineering 131 031016 (2009) [doi: 10.1115/1.3139217]
    4. A. Mesbah, F. Zaïri, S. Boutaleb, J. M. Gloaguen, M. Naït-abdelaziz, S. Xie, T. Boukharouba, J. M. Lefebvre, Experimental characterization and modeling stiffness of polymer/clay nanocomposites within a hierarchical multiscale framework, Journal of Applied Polymer Science 114 3274-3291 (2009) [doi: 10.1002/app.30547]
    5. R. Boulahia, J. M. Gloaguen, F. Zaïri, M. Naït-abdelaziz, R. Seguela, T. Boukharouba, J. M. Lefebvre, Deformation behaviour and mechanical properties of polypropylene processed by equal channel angular extrusion: Effects of back-pressure and extrusion velocity, Polymer 50 5508-5517 (2009) [doi: 10.1016/j.polymer.2009.09.050]
    6. S. Xie, R. Séguéla, J. M. Lefebvre, J. M. Gloaguen, A re-examination of the sub-Tmexotherm in polyamide 6: The roles of thermal history, water and clay, Journal of Polymer Science Part B: Polymer Physics 47 2385-2393 (2009) [doi: 10.1002/polb.21835]
    7. S. Boutaleb, F. Zaïri, A. Mesbah, M. Naït-abdelaziz, J. M. Gloaguen, T. Boukharouba, J. M. Lefebvre, Micromechanical modelling of the yield stress of polymer-particulate nanocomposites with an inhomogeneous interphase, Procedia Engineering 1 217-220 (2009) [doi: 10.1016/j.proeng.2009.06.051]
    8. B. Aour, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, J. M. Lefebvre, Analysis of Polypropylene Deformation in a 135° ECAE Die: Experiments and Three-Dimensional Finite Element Simulations, Key Engineering Materials 424 71-78 (2009) [doi: 10.4028/www.scientific.net/KEM.424.71]
  • 2008
    1. F. Zairi, M. Naitabdelaziz, J. Gloaguen, A. Bouaziz, J. Lefebvre, Micromechanical modelling and simulation of chopped random fiber reinforced polymer composites with progressive debonding damage, International Journal of Solids and Structures 45 5220-5236 (2008) [doi: 10.1016/j.ijsolstr.2008.05.013]
    2. B. Aour, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, O. Rahmani, J. M. Lefebvre, A computational study of die geometry and processing conditions effects on equal channel angular extrusion of a polymer, International Journal of Mechanical Sciences 50 589-602 (2008) [doi: 10.1016/j.ijmecsci.2007.07.01]
    3. F. Zaïri, B. Aour, J. M. Gloaguen, M. Naït-abdelaziz, J. M. Lefebvre, Steady plastic flow of a polymer during ECAE process: experiments and numerical modelling, Polymer Engineering & Science 48 1015-21 (2008) [doi: 10.1002/pen.21042]
    4. F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, J. M. Lefebvre, Modelling of the elasto-viscoplastic damage behaviour of glassy polymers, International Journal of Plasticity 24 945-965 (2008) [doi: 10.1016/j.ijplas.2007.08.001]
  • 2007
    1. F. Zaïri, K. Woznica, M. Naït-abdelaziz, J. M. Gloaguen, Elasto-viscoplastic constitutive equations for the description of glassy polymers behaviour at constant strain rate, Journal of Engineering Materials and Technology 129 29-35 (2007) [doi: 10.1115/1.2400256]
    2. A. Bouaziz, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, J. M. Lefebvre, Micromechanical modelling and experimental investigation of random discontinuous glass fiber polymer-matrix composites, Composites Science and Technology 67 3278-3285 (2007) [doi: 10.1016/j.compscitech.2007.03.031]
    3. F. Zaïri, B. Aour, J. M. Gloaguen, M. Naït-abdelaziz, J. M. Lefebvre, Influence of the yield strain magnitude on the materials flow in equal-channel angular extrusion process, Scripta Materialia 56 105-108 (2007) [doi: 10.1016/j.scriptamat.2006.09.032]
  • 2006
    1. F. Zaïri, B. Aour, J. M. Gloaguen, M. Naït-abdelaziz, J. M. Lefebvre, Numerical modelling of elastic-viscoplastic equal channel angular extrusion process of a polymer, Computational Materials Science 38 202-216 (2006) [doi: 10.1016/j.commatsci.2006.02.008]
    2. B. Aour, F. Zaïri, J. M. Gloaguen, M. Naït-abdelaziz, J. M. Lefebvre, Numerical investigation on equal channel angular extrusion process of polymers, Computational Materials Science 37 491-506 (2006) [doi: 10.1016/j.commatsci.2005.11.008]
  • 2005
    1. F. Zaïri, M. Naït-abdelaziz, K. Woznica, J. M. Gloaguen, Constitutive equations for the viscoplastic-damage behaviour of a rubber-modified polymer, European Journal of Mechanics A/Solids 24 169-182 (2005) [doi: 10.1016/j.euromechsol.2004.11.003]
Unité Matériaux et Transformations, CNRS UMR 8207, Université Lille1, Bâtiment C6, 59655 Villeneuve d'Ascq, France
Mentions Légales - Contacter le webmaster
Valid CSSValid HTML 4.01 Transitional