Français - English
Unité Matériaux et Transformations

Unité Matériaux et Transformations
CNRS UMR 8207 - Université de Lille

Directeur : Alexandre Legris

Directeur adjoint : Patrice Woisel

Secrétariat Tél : +33 (0) 320 43 49 67
Fax : + 33 (0) 320 43 65 91
Courriel: secretariat-umet@univ-lille1.fr

UMET - Métallurgie Physique et Génie des Matériaux

UMET - Métallurgie Physique et Génie des Matériaux

Auteurs () Entre et
Grouper par revues
2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005
2017
  1. O. A. Restrepo, C. S. Becquart, F. El-mellouhi, O. Bouhali, N. Mousseau, Diffusion mechanisms of C in 100, 110 and 111 Fe surfaces studied using kinetic activation-relaxation technique, Acta Materialia 136 303-314 (2017) [doi: 10.1016/j.actamat.2017.07.009]
  2. J. Marian, C. S. Becquart, C. Domain, S. L. Dudarev, M. R. Gilbert, R. J. Kurtz, D. R. Mason, K. Nordlund, A. E. Sand, L. L. Snead, T. Suzudo, B. D. Wirth, Recent advances in modeling and simulation of the exposure and response of tungsten to fusion energy conditions, Nuclear Fusion 57 092008 (2017) [doi: 10.1088/1741-4326/aa5e8d]
  3. C. Y. Dan, Z. Chen, G. Ji, S. H. Zhong, Y. Wu, F. Brisset, H. W. Wang, V. Ji, Microstructure study of cold rolling nanosized in-situ TiB 2 particle reinforced Al composites, Materials & Design 130 357-365 (2017) [doi: 10.1016/j.matdes.2017.05.076]
  4. E. A. Hodille, F. Ghiorghiu, Y. Addab, A. Založnik, M. Minissale, Z. Piazza, C. Martin, T. Angot, L. Gallais, M. F. Barthe, C. S. Becquart, S. Markelj, J. Mougenot, C. Grisolia, R. Bisson, Retention and release of hydrogen isotopes in tungsten plasma-facing components: the role of grain boundaries and the native oxide layer from a joint experiment-simulation integrated approach, Nuclear Fusion 57 076019 (2017) [doi: 10.1088/1741-4326/aa6d24]
  5. I. H. Sahputra, A. Chakrabarty, O. Restrepo, O. Bouhali, N. Mousseau, C. S. Becquart, F. El-mellouhi, Carbon adsorption on and diffusion through the Fe(110) surface and in bulk: Developing a new strategy for the use of empirical potentials in complex material set-ups, physica status solidi (b) 254 1600408 (2017) [doi: 10.1002/pssb.201600408]
  6. M. G. D. V. Cuppari, R. G. A. Veiga, H. Goldenstein, J. E. G. Silva, C. S. Becquart, Lattice Instabilities and Phase Transformations in Fe from Atomistic Simulations, Journal of Phase Equilibria and Diffusion 9 251 (2017) [doi: 10.1007/s11669-017-0524-0]
  7. A. Boucherit, M. N. Avettand-fènoël, R. Taillard, Effect of a Zn interlayer on dissimilar FSSW of Al and Cu, Materials & Design 124 87-99 (2017) [doi: 10.1016/j.matdes.2017.03.063]
  8. M. J. Peet, H. S. Hasan, M. N. Avettand-fènoël, S. H. A. Raubye, H. K. D. H. Bhadeshia, Low-temperature transformation to bainite in a medium-carbon steel, International Journal of Materials Research 108 89-98 (2017) [doi: 10.3139/146.111461]
  9. M. Chen, X. Li, G. Ji, Y. Wu, Z. Chen, W. Baekelant, K. Vanmeensel, H. Wang, J. P. Kruth, Novel Composite Powders with Uniform TiB2 Nano-Particle Distribution for 3D Printing, Applied Sciences 7 250 (2017) [doi: 10.3390/app7030250]
  10. X. P. Li, G. Ji, Z. Chen, A. Addad, Y. Wu, H. W. Wang, J. Vleugels, J. Van humbeeck, J. P. Kruth, Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility, Acta Materialia 129 183-193 (2017) [doi: 10.1016/j.actamat.2017.02.062]
  11. S. Tekumalla, R. Shabadi, C. Yang, S. Seetharaman, M. Gupta, Strengthening due to the in-situ evolution of ß 1 ′ Mg-Zn rich phase in a ZnO nanoparticles introduced Mg-Y alloy, Scripta Materialia 133 29-32 (2017) [doi: 10.1016/j.scriptamat.2017.02.019]
  12. E. A. Hodille, A. Založnik, S. Markelj, T. Schwarz-selinger, C. S. Becquart, R. Bisson, C. Grisolia, Simulations of atomic deuterium exposure in self-damaged tungsten, Nuclear Fusion 57 056002 (2017) [doi: 10.1088/1741-4326/aa5aa5]
  13. Z. Li, N. Limodin, A. Tandjaoui, P. Quaegebeur, P. Osmond, D. Balloy, Influence of Sr, Fe and Mn content and casting process on the microstructures and mechanical properties of AlSi7Cu3 alloy, Materials Science and Engineering: A 689 286-297 (2017) [doi: 10.1016/j.msea.2017.02.041]
  14. M. A. Louchez, L. Thuinet, R. Besson, A. Legris, Microscopic Phase-Field modeling of hcp/fcc interfaces, Computational Materials Science 132 62-73 (2017) [doi: 10.1016/j.commatsci.2017.02.012]
  15. M. Cao, D. B. Xiong, Z. Tan, G. Ji, B. Amin-ahmadi, Q. Guo, G. Fan, C. Guo, Z. Li, D. Zhang, Aligning graphene in bulk copper: Nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity, Carbon 117 65-74 (2017) [doi: 10.1016/j.carbon.2017.02.089]
  16. R. U. Din, N. Nikogeorgos, M. S. Jellesen, R. Shabadi, R. Ambat, Influence of steam-based pre-treatment using acidic chemistries on the adhesion performance of powder coated aluminium alloy AA6060, International Journal of Adhesion and Adhesives 74 167-176 (2017) [doi: 10.1016/j.ijadhadh.2017.01.008]
  17. M. Chiapetto, L. Messina, C. S. Becquart, P. Olsson, L. Malerba, Nanostructure evolution of neutron-irradiated reactor pressure vessel steels: Revised Object kinetic Monte Carlo model, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 393 105-109 (2017) [doi: 10.1016/j.nimb.2016.09.025]
  18. Z. Chen, G. A. Sun, Y. Wu, M. H. Mathon, A. Borbely, D. Chen, G. Ji, M. L. Wang, S. Y. Zhong, H. W. Wang, Multi-scale study of microstructure evolution in hot extruded nano-sized TiB2 particle reinforced aluminum composites, Materials & Design 116 577-590 (2017) [doi: 10.1016/j.matdes.2016.12.070]
  19. L. Thuinet, H. Rouchette, A. Legris, 3D phase-field modelling of dislocation loop sink strengths, Journal of Nuclear Materials 483 62-81 (2017) [doi: 10.1016/j.jnucmat.2016.10.041]
  20. O. Waseda, R. G. Veiga, J. Morthomas, P. Chantrenne, C. S. Becquart, F. Ribeiro, A. Jelea, H. Goldenstein, M. Perez, Formation of carbon Cottrell atmospheres and their effect on the stress field around an edge dislocation, Scripta Materialia 129 16-19 (2017) [doi: 10.1016/j.scriptamat.2016.09.032]
2016
  1. M. Desormeaux, B. Rouxel, A. T. Motta, M. Kirk, C. Bisor, Y. De carlan, A. Legris, Development of radiation damage during in-situ Kr ++ irradiation of Fe Ni Cr model austenitic steels, Journal of Nuclear Materials 475 156-167 (2016) [doi: 10.1016/j.jnucmat.2016.04.012]
  2. M. Delbove, J. B. Vogt, J. Bouquerel, T. Soreau, N. François, F. Primaux, Microstructure Evolution of a Precipitation Hardened Cu-Ni-Si Alloy during Low Cycle Fatigue, Solid State Phenomena 258 546-549 (2016) [doi: 10.4028/www.scientific.net/SSP.258.546]
  3. C. Schayes, J. Bouquerel, J. B. Vogt, F. Palleschi, S. Zaefferer, A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading, Materials Characterization 115 61-70 (2016) [doi: 10.1016/j.matchar.2016.03.020]
  4. C. Schayes, J. B. Vogt, J. Bouquerel, F. Palleschi, S. Zaefferer, Cyclic plasticity mechanism of the M330-35A steel, International Journal of Fatigue 82 530-539 (2016) [doi: 10.1016/j.ijfatigue.2015.09.008]
  5. P. Olsson, C. S. Becquart, C. Domain, Ab initio threshold displacement energies in iron, Materials Research Letters 4 219-225 (2016) [doi: 10.1080/21663831.2016.1181680]
  6. A. Chakrabarty, O. Bouhali, N. Mousseau, C. S. Becquart, F. El-mellouhi, Insights on finite size effects in ab initio study of CO adsorption and dissociation on Fe 110 surface, Journal of Applied Physics 120 055301 (2016) [doi: 10.1063/1.4959990]
  7. A. Chakrabarty, O. Bouhali, N. Mousseau, C. S. Becquart, F. El-mellouhi, Influence of surface vacancy defects on the carburisation of Fe 110 surface by carbon monoxide, The Journal of Chemical Physics 145 044710 (2016) [doi: 10.1063/1.4958966]
  8. V. Subramanian, V. V. Ordomsky, B. Legras, K. Cheng, C. Cordier, P. A. Chernavskii, A. Y. Khodakov, Design of iron catalysts supported on carbon–silica composites with enhanced catalytic performance in high-temperature Fischer–Tropsch synthesis, Catalysis Science & Technology 6 4953-4961 (2016) [doi: 10.1039/C6CY00060F]
  9. A. Simar, M. N. Avettand-fènoël, State of the art about dissimilar metal friction stir welding, Science and Technology of Welding and Joining 1-15 (2016) [doi: 10.1080/13621718.2016.1251712]
  10. M. N. Avettand-fènoël, A. Simar, A review about Friction Stir Welding of metal matrix composites, Materials Characterization 120 1-17 (2016) [doi: 10.1016/j.matchar.2016.07.010]
  11. S. Tekumalla, C. Yang, S. Seetharaman, W. L. E. Wong, C. S. Goh, R. Shabadi, M. Gupta, Enhancing overall static/dynamic/damping/ignition response of magnesium through the addition of lower amounts (<2%) of yttrium, Journal of Alloys and Compounds 689 350-358 (2016) [doi: 10.1016/j.jallcom.2016.07.324]
  12. A. Dorbane, G. Ayoub, B. Mansoor, R. F. Hamade, G. Kridli, R. Shabadi, A. Imad, Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets, Materials Science and Engineering: A 649 190-200 (2016) [doi: 10.1016/j.msea.2015.09.097]
  13. E. W. Awin, S. Sridar, R. Shabadi, R. Kumar, Structural, functional and mechanical properties of spark plasma sintered gadolinia (Gd2O3), Ceramics International 42 1384-1391 (2016) [doi: 10.1016/j.ceramint.2015.09.080]
  14. S. Sankaranarayanan, Q. B. Nguyen, R. Shabadi, A. H. Almajid, M. Gupta, Powder metallurgy hollow fly ash cenospheres’ particles reinforced magnesium composites, Powder Metallurgy 59 188-196 (2016) [doi: 10.1080/00325899.2016.1139339]
  15. S. Tekumalla, S. Seetharaman, N. Quy bau, W. Leong eugene wong, C. Sim goh, R. Shabadi, M. Gupta, Influence of Cerium on the Deformation and Corrosion of Magnesium, Journal of Engineering Materials and Technology 138 031011 (2016) [doi: 10.1115/1.4033033]
  16. M. Chiapetto, L. Malerba, A. Puype, C. S. Becquart, Object kinetic Monte Carlo study of the effect of grain boundaries in martensitic Fe-Cr-C alloys, physica status solidi (a) 213 2981-2987 (2016) [doi: 10.1002/pssa.201600294]
  17. L. Messina, M. Chiapetto, P. Olsson, C. S. Becquart, L. Malerba, An object kinetic Monte Carlo model for the microstructure evolution of neutron-irradiated reactor pressure vessel steels, physica status solidi (a) 213 2974-2980 (2016) [doi: 10.1002/pssa.201600038]
  18. M. Chiapetto, C. S. Becquart, L. Malerba, Simulation of nanostructural evolution under irradiation in Fe-9%CrC alloys: An object kinetic Monte Carlo study of the effect of temperature and dose-rate, Nuclear Materials and Energy 9 565-570 (2016) [doi: 10.1016/j.nme.2016.04.009]
  19. M. Delbove, J. B. Vogt, J. Bouquerel, T. Soreau, F. Primaux, Low cycle fatigue behaviour of a precipitation hardened Cu-Ni-Si alloy, International Journal of Fatigue 92 313-320 (2016) [doi: 10.1016/j.ijfatigue.2016.07.019]
  20. F. Rouillard, J. L. Courouau, B. Duprey, S. Mathieu, M. Vilasi, Y. Bouizi, G. Boissonnet, F. Pedraza, I. Proriol-serre, Evaluation of the Compatibility of Aluminide Coatings in High-Temperature Sodium for Fast Reactor Application, Oxidation of Metals (2016) [doi: 10.1007/s11085-016-9689-x]
  21. G. Seidametova, J. B. Vogt, I. Proriol-serre, AFM Study of Microstructure Role in the Cyclic Plasticity of Martensitic Steel, Solid State Phenomena 258 444-447 (2016) [doi: 10.4028/www.scientific.net/SSP.258.444]
  22. I. H. Sahputra, A. Chakrabarty, O. Restrepo, O. Bouhali, N. Mousseau, C. S. Becquart, F. El-mellouhi, Carbon adsorption on and diffusion through the Fe(110) surface and in bulk: Developing a new strategy for the use of empirical potentials in complex material set-ups, physica status solidi (b) (2016) [doi: 10.1002/pssb.201600408]
  23. Z. Tan, G. Ji, A. Addad, Z. Li, J. F. Silvain, D. Zhang, Tailoring interfacial bonding states of highly thermal performance diamond/Al composites: Spark plasma sintering vs. vacuum hot pressing, Composites Part A: Applied Science and Manufacturing 91 9-19 (2016) [doi: 10.1016/j.compositesa.2016.09.012]
  24. W. Ben haj othmen, B. Sieber, C. Cordier, H. Elhouichet, A. Addad, B. Gelloz, M. Moreau, A. Barras, M. Férid, R. Boukherroub, Iron addition induced tunable band gap and tetravalent Fe ion in hydrothermally prepared SnO2 nanocrystals: Application in photocatalysis, Materials Research Bulletin 83 481-490 (2016) [doi: 10.1016/j.materresbull.2016.06.041]
  25. J. B. Piochaud, M. Nastar, F. Soisson, L. Thuinet, A. Legris, Atomic-based phase-field method for the modeling of radiation induced segregation in Fe–Cr, Computational Materials Science 122 249-262 (2016) [doi: 10.1016/j.commatsci.2016.05.021]
  26. M. N. Avettand-fènoël, G. Racineux, L. Debeugny, R. Taillard, Microstructural characterization and mechanical performance of an AA2024 aluminium alloy — Pure copper joint obtained by linear friction welding, Materials & Design 98 305-318 (2016) [doi: 10.1016/j.matdes.2016.03.029]
  27. A. De backer, A. Sand, C. J. Ortiz, C. Domain, P. Olsson, E. Berthod, C. S. Becquart, Primary damage in tungsten using the binary collision approximation, molecular dynamic simulations and the density functional theory, Physica Scripta T167 014018 (2016) [doi: 10.1088/0031-8949/T167/1/014018]
  28. E. A. Hodille, Y. Ferro, N. Fernandez, C. S. Becquart, T. Angot, J. M. Layet, R. Bisson, C. Grisolia, Study of hydrogen isotopes behavior in tungsten by a multi trapping macroscopic rate equation model, Physica Scripta T167 014011 (2016) [doi: 10.1088/0031-8949/2016/T167/014011]
  29. L. Yan, Z. Tan, G. Ji, Z. Li, G. Fan, D. Schryvers, A. Shan, D. Zhang, A quantitative method to characterize the Al4C3-formed interfacial reaction: The case study of MWCNT/Al composites, Materials Characterization 112 213-218 (2016) [doi: 10.1016/j.matchar.2015.12.031]
  30. A. E. Sand, J. Dequeker, C. S. Becquart, C. Domain, K. Nordlund, Non-equilibrium properties of interatomic potentials in cascade simulations in tungsten, Journal of Nuclear Materials 470 119-127 (2016) [doi: 10.1016/j.jnucmat.2015.12.012]
  31. G. Ji, Z. Tan, Y. Lu, D. Schryvers, Z. Li, D. Zhang, Heterogeneous interfacial chemical nature and bonds in a W-coated diamond/Al composite, Materials Characterization 112 129-133 (2016) [doi: 10.1016/j.matchar.2015.12.013]
  32. P. Nogning kamta, A. Mejias, F. Roudet, G. Louis, M. Touzin, D. Chicot, Indentation creep analysis of T22 and T91 chromium based steels, Materials Science and Engineering: A 652 315-324 (2016) [doi: 10.1016/j.msea.2015.11.098]
  33. O. A. Restrepo, N. Mousseau, F. El-mellouhi, O. Bouhali, M. Trochet, C. S. Becquart, Diffusion properties of Fe–C systems studied by using kinetic activation–relaxation technique, Computational Materials Science 112 96-106 (2016) [doi: 10.1016/j.commatsci.2015.10.017]
  34. Z. Tan, Z. Chen, G. Fan, G. Ji, J. Zhang, R. Xu, A. Shan, Z. Li, D. Zhang, Effect of particle size on the thermal and mechanical properties of aluminum composites reinforced with SiC and diamond, Materials & Design 90 845-851 (2016) [doi: 10.1016/j.matdes.2015.11.028]
  35. M. N. Avettand-fènoël, R. Taillard, Effect of a pre or postweld heat treatment on microstructure and mechanical properties of an AA2050 weld obtained by SSFSW, Materials & Design 89 348-361 (2016) [doi: 10.1016/j.matdes.2015.09.151]
2015
  1. J. Ribis, E. Bordas, P. Trocellier, Y. Serruys, Y. De carlan, A. Legris, Radiation-sustained nanocluster metastability in oxide dispersion strengthened materials, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 365 22-25 (2015) [doi: 10.1016/j.nimb.2015.07.062]
  2. J. Ribis, E. Bordas, P. Trocellier, Y. Serruys, Y. De carlan, A. Legris, Radiation-sustained nanocluster metastability in oxide dispersion strengthened materials, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 365 22-25 (2015) [doi: 10.1016/j.nimb.2015.07.062]
  3. C. Schayes, J. B. Vogt, J. Bouquerel, F. Palleschi, Rotor Design Optimisation through Low Cycle Fatigue Testing, Procedia Engineering 133 233-243 (2015) [doi: 10.1016/j.proeng.2015.12.663]
  4. E. A. Hodille, X. Bonnin, R. Bisson, T. Angot, C. S. Becquart, J. M. Layet, C. Grisolia, Macroscopic rate equation modeling of trapping/detrapping of hydrogen isotopes in tungsten materials, Journal of Nuclear Materials 467 424-431 (2015) [doi: 10.1016/j.jnucmat.2015.06.041]
  5. G. Serghiou, G. Ji, N. Odling, H. J. Reichmann, J. P. Morniroli, R. Boehler, D. J. Frost, J. P. Wright, B. Wunder, Creating Reactivity with Unstable Endmembers using Pressure and Temperature: Synthesis of Bulk Cubic Mg0.4Fe0.6N, Angewandte Chemie International Edition 54 15109-15112 (2015) [doi: 10.1002/anie.201506257]
  6. F. Housaer, F. Beclin, M. Touzin, D. Tingaud, A. Legris, A. Addad, Interfacial characterization in carbon nanotube reinforced aluminum matrix composites, Materials Characterization 110 94-101 (2015) [doi: 10.1016/j.matchar.2015.10.014]
  7. A. Anghelus, M. N. Avettand-fènoël, C. Cordier, R. Taillard, Thermal crystallization of an Al88Ni6Sm6 metallic glass, Journal of Alloys and Compounds 651 454-464 (2015) [doi: 10.1016/j.jallcom.2015.08.102]
  8. Z. Chen, J. Li, A. Borbely, G. Ji, S. Y. Zhong, Y. Wu, M. L. Wang, H. W. Wang, The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing, Materials & Design 88 999-1007 (2015) [doi: 10.1016/j.matdes.2015.09.127]
  9. R. G. A. Veiga, H. Goldenstein, M. Perez, C. S. Becquart, Monte Carlo and molecular dynamics simulations of screw dislocation locking by Cottrell atmospheres in low carbon Fe–C alloys, Scripta Materialia 108 19-22 (2015) [doi: 10.1016/j.scriptamat.2015.06.012]
  10. S. Davıðsdottir, J. Petit, R. Shabadi, S. Canulescu, K. Almtoft, K. Dirscher, I. Andersen, R. Ambat, Effect of interfacial oxide thickness on the photocatalytic activity of magnetron-sputtered TiO2 coatings on aluminum substrate, physica status solidi (a) 1-11 (2015) [doi: 10.1002/pssa.201532238]
  11. M. Chiapetto, L. Malerba, C. S. Becquart, Effect of Cr content on the nanostructural evolution of irradiated ferritic/martensitic alloys: An object kinetic Monte Carlo model, Journal of Nuclear Materials 465 326-336 (2015) [doi: 10.1016/j.jnucmat.2015.06.012]
  12. L. Cheng, G. De temmerman, P. A. Zeijlmans van emmichoven, G. Ji, H. B. Zhou, B. Wang, Y. Yuan, Y. Zhang, G. H. Lu, Effect of neon plasma pre-irradiation on surface morphology and deuterium retention of tungsten, Journal of Nuclear Materials 463 1025-1028 (2015) [doi: 10.1016/j.jnucmat.2014.11.110]
  13. Z. Chen, Z. Tan, G. Ji, G. Fan, D. Schryvers, Q. Ouyang, Z. Li, Effect of Interface Evolution on Thermal Conductivity of Vacuum Hot Pressed SiC/Al Composites, Advanced Engineering Materials 17 1076-1084 (2015) [doi: 10.1002/adem.201400412]
  14. K. Cheng, M. Virginie, V. V. Ordomsky, C. Cordier, P. A. Chernavskii, M. I. Ivantsov, S. Paul, Y. Wang, A. Y. Khodakov, Pore size effects in high-temperature Fischer–Tropsch synthesis over supported iron catalysts, Journal of Catalysis 328 139-150 (2015) [doi: 10.1016/j.jcat.2014.12.007]
  15. L. Pittarello, G. Ji, A. Yamaguchi, D. Schryvers, V. Debaille, P. Claeys, From olivine to ringwoodite: a TEM study of a complex process, Meteoritics & Planetary Science 50 944-957 (2015) [doi: 10.1111/maps.12441]
  16. M. Chiapetto, C. S. Becquart, C. Domain, L. Malerba, Nanostructure evolution under irradiation of Fe(C)MnNi model alloys for reactor pressure vessel steels, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 352 56-60 (2015) [doi: 10.1016/j.nimb.2014.11.102]
  17. A. Souidi, M. Hou, C. S. Becquart, C. Domain, A. De backer, Long term simulation of point defect cluster size distributions from atomic displacement cascades in Fe70Cr20Ni10, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 352 51-55 (2015) [doi: 10.1016/j.nimb.2014.11.114]
  18. M. Chiapetto, C. S. Becquart, C. Domain, L. Malerba, Kinetic Monte Carlo simulation of nanostructural evolution under post-irradiation annealing in dilute FeMnNi, physica status solidi (c) 12 20-24 (2015) [doi: 10.1002/pssc.201400143]
  19. M. Chiapetto, L. Malerba, C. S. Becquart, Nanostructure evolution under irradiation in FeMnNi alloys: A “grey alloy” object kinetic Monte Carlo model, Journal of Nuclear Materials 462 91-99 (2015) [doi: 10.1016/j.jnucmat.2015.03.045]
  20. S. Bellayer, M. Jimenez, B. Gardelle, G. Delaplace, J. Bouquerel, S. Duquesne, S. Bourbigot, The electron microanalyzer (EPMA): a powerful device for the microanalysis of filled polymeric materials, Polymers for Advanced Technologies (2015) [doi: 10.1002/pat.3523]
  21. Y. Tang, Z. Chen, A. Borbély, G. Ji, S. Y. Zhong, D. Schryvers, V. Ji, H. W. Wang, Quantitative study of particle size distribution in an in-situ grown Al–TiB2 composite by synchrotron X-ray diffraction and electron microscopy, Materials Characterization 102 131-136 (2015) [doi: 10.1016/j.matchar.2015.03.003]
  22. A. Anghelus, M. N. Avettand-fènoël, C. Cordier, R. Taillard, Microstructural evolution of aluminium/Al–Ni–Sm glass forming alloy laminates obtained by Controlled Accumulative Roll Bonding, Journal of Alloys and Compounds 631 209-218 (2015) [doi: 10.1016/j.jallcom.2014.12.231]
  23. H. Rouchette, L. Thuinet, A. Legris, A. Ambard, C. Domain, Numerical evaluation of dislocation loop sink strengths: A phase-field approach, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms (2015) [doi: 10.1016/j.nimb.2015.01.006]
  24. G. Serghiou, G. Ji, N. Odling, H. J. Reichmann, D. J. Frost, J. P. Wright, Synthesis and high-resolution study distinguishing between very similar interstitial iron nitride structures, High Pressure Research 1-9 (2015) [doi: 10.1080/08957959.2014.996561]
  25. R. Besson, M. N. Avettand-fènoël, L. Thuinet, J. Kwon, A. Addad, P. Roussel, A. Legris, Mechanisms of formation of Al4Cu9 during mechanical alloying: An experimental study, Acta Materialia 87 216-224 (2015) [doi: 10.1016/j.actamat.2014.12.050]
  26. C. Zhou, D. Chen, X. B. Zhang, Z. Chen, S. Y. Zhong, Y. Wu, G. Ji, H. W. Wang, The roles of geometry and topology structures of graphite fillers on thermal conductivity of the graphite/aluminum composites, Physics Letters A 379 452-457 (2015) [doi: 10.1016/j.physleta.2014.10.048]
  27. M. N. Avettand-fenoel, R. Taillard, Heterogeneity of the Nugget Microstructure in a Thick 2050 Al Friction-Stirred Weld, Metallurgical and Materials Transactions A 46 300-314 (2015) [doi: 10.1007/s11661-014-2638-x]
  28. C. Zhou, W. Huang, Z. Chen, G. Ji, M. L. Wang, D. Chen, H. W. Wang, In-plane thermal enhancement behaviors of Al matrix composites with oriented graphite flake alignment, Composites Part B: Engineering 70 256-262 (2015) [doi: 10.1016/j.compositesb.2014.11.018]
2014
  1. M. L. Lescoat, J. Ribis, Y. Chen, E. A. Marquis, E. Bordas, P. Trocellier, Y. Serruys, A. Gentils, O. Kaïtasov, Y. De carlan, A. Legris, Radiation-induced Ostwald ripening in oxide dispersion strengthened ferritic steels irradiated at high ion dose, Acta Materialia 78 328-340 (2014) [doi: 10.1016/j.actamat.2014.06.060]
  2. T. Popela, D. Vojtěch, J. B. Vogt, A. Michalcová, Structural, mechanical and oxidation characteristics of siliconized Ti–Al–X (X=Nb, Ta) alloys, Applied Surface Science 307 579-588 (2014) [doi: 10.1016/j.apsusc.2014.04.076]
  3. A. Alhussein, M. Risbet, A. Bastien, J. P. Chobaut, D. Balloy, J. Favergeon, Influence of silicon and addition elements on the mechanical behavior of ferritic ductile cast iron, Materials Science and Engineering: A 605 222-228 (2014) [doi: 10.1016/j.msea.2014.03.057]
  4. O. Hamdane, J. B. Vogt, I. Proriol-serre, N. Nuns, ToF-SIMS analyses of brittle crack initiation of T91 steel by liquid sodium, Materials Chemistry and Physics 145 243-249 (2014) [doi: 10.1016/j.matchemphys.2014.02.016]
  5. C. Ye, J. B. Vogt, I. Proriol-serre, Brittle fracture of T91 steel in liquid lead–bismuth eutectic alloy, Nuclear Engineering and Design 280 680-685 (2014) [doi: 10.1016/j.nucengdes.2014.04.044]
  6. J. Boisse, A. De backer, C. Domain, C. S. Becquart, Modeling of the self trapping of helium and the trap mutation in tungsten using DFT and empirical potentials based on DFT, Journal of Materials Research 29 2374-2386 (2014) [doi: 10.1557/jmr.2014.258]
  7. J. Boisse, C. Domain, C. S. Becquart, Modelling self trapping and trap mutation in tungsten using DFT and Molecular Dynamics with an empirical potential based on DFT, Journal of Nuclear Materials 455 10-15 (2014) [doi: 10.1016/j.jnucmat.2014.02.031]
  8. C. J. Ortiz, A. Souidi, C. S. Becquart, C. Domain, M. Hou, Recent radiation damage studies and developments of the Marlowe code, Radiation Effects and Defects in Solids 169 592-602 (2014) [doi: 10.1080/10420150.2014.920018]
  9. D. Costa, G. Adjanor, C. S. Becquart, P. Olsson, C. Domain, Vacancy migration energy dependence on local chemical environment in Fe–Cr alloys: A Density Functional Theory study, Journal of Nuclear Materials 452 425-433 (2014) [doi: 10.1016/j.jnucmat.2014.05.007]
  10. G. H. Lu, H. B. Zhou, C. S. Becquart, A review of modelling and simulation of hydrogen behaviour in tungsten at different scales, Nuclear Fusion 54 086001 (2014) [doi: 10.1088/0029-5515/54/8/086001]
  11. S. Davíđsdóttir, J. P. Petit, M. Mermoux, R. Shabadi, S. Canulescu, K. P. Almtoft, K. Dirscherl, R. Ambat, Interfacial Structure and Photocatalytic Activity of Magnetron Sputtered TiO2 on Conducting Metal Substratesundefined, ACS Applied Materials & Interfaces 141209160026002 (2014) [doi: 10.1021/am5059298]
  12. S. Hany, B. Duponchel, C. Poupin, A. A. Kais, D. Dewael, J. B. Vogt, J. Bouquerel, H. Kacem, A. Mouftiez, S. Hariri, M. Milochova, E. Bychkov, E. A. Aad, Microstructural and Mechanical Properties of 9%Ni Steels Used for the Construction of LNG Storage Tanks, Advanced Materials Research 936 1953-1957 (2014) [doi: 10.4028/www.scientific.net/AMR.936.1953]
  13. J. Bouquerel, B. Diawara, A. Dubois, M. Dubar, J. B. Vogt, D. Najjar, Investigations of the microstructural response to a cold forging process of the 6082-T6 alloy, Materials & Design (2014) [doi: 10.1016/j.matdes.2014.12.005]
  14. R. Besson, J. Kwon, L. Thuinet, M. N. Avettand-fènoël, A. Legris, First-principles study of Al-Cu energetics and consequences on athermal formation of Cu-rich compounds, Physical Review B 90 (2014) [doi: 10.1103/PhysRevB.90.214104]
  15. V. C. Gudla, F. Jensen, A. Simar, R. Shabadi, R. Ambat, Friction Stir Processed Al-TiO2 Surface Composites: Anodizing Behaviour and Optical Appearance, Applied Surface Science (2014) [doi: 10.1016/j.apsusc.2014.10.151]
  16. K. Cheng, V. V. Ordomsky, M. Virginie, B. Legras, P. A. Chernavskii, V. O. Kazak, C. Cordier, S. Paul, Y. Wang, A. Y. Khodakov, Support effects in high temperature Fischer-Tropsch synthesis on iron catalysts, Applied Catalysis A: General 488 66-77 (2014) [doi: 10.1016/j.apcata.2014.09.033]
  17. R. Shabadi, M. N. Avettand-fènoël, A. Simar, R. Taillard, P. K. Jain, R. Johnson, Thermal Conductivity in Yttria Dispersed Copper, Materials & Design (2014) [doi: 10.1016/j.matdes.2014.09.083]
  18. V. C. Gudla, S. Canulescu, R. Shabadi, K. Rechendorff, K. Dirscherl, R. Ambat, Structure of anodized Al-Zr sputter deposited coatings and effect on optical appearance, Applied Surface Science (2014) [doi: 10.1016/j.apsusc.2014.09.037]
  19. H. S. Hasan, M. J. Peet, M. N. Avettand-fènoël, H. K. D. H. Bhadeshia, Effect of tempering upon the tensile properties of a nanostructured bainitic steel, Materials Science and Engineering: A 615 340-347 (2014) [doi: 10.1016/j.msea.2014.07.097]
  20. C. Cordier-robert, J. Foct, Driving force for low temperature sintering of interstitial and intermetallic powders and induced applications, Powder Metallurgy 57 220-224 (2014) [doi: 10.1179/1743290114Y.0000000090]
  21. S. M. Ma, P. Zhang, G. Ji, Z. Chen, G. A. Sun, S. Y. Zhong, V. Ji, H. W. Wang, Microstructure and mechanical properties of friction stir processed Al–Mg–Si alloys dispersion-strengthened by nanosized TiB2 particles, Journal of Alloys and Compounds 616 128-136 (2014) [doi: 10.1016/j.jallcom.2014.07.092]
  22. C. Zhou, G. Ji, Z. Chen, M. Wang, A. Addad, D. Schryvers, H. Wang, Fabrication, interface characterization and modeling of oriented graphite flakes/Si/Al composites for thermal management applications, Materials & Design 63 719-728 (2014) [doi: 10.1016/j.matdes.2014.07.009]
  23. H. Rouchette, L. Thuinet, A. Legris, A. Ambard, C. Domain, Influence of shape anisotropy of self-interstitials on dislocation sink efficiencies in Zr: Multiscale modeling, Physical Review B 90 (2014) [doi: 10.1103/PhysRevB.90.014104]
  24. S. Daviðsdóttir, R. Shabadi, A. C. Galca, I. H. Andersen, K. Dirscherl, R. Ambat, Investigation of DC magnetron-sputtered TiO2 coatings: Effect of coating thickness, structure, and morphology on photocatalytic activity, Applied Surface Science (2014) [doi: 10.1016/j.apsusc.2014.06.047]
  25. X. P. Li, J. Q. Wang, M. Yan, G. Ji, G. B. Schaffer, M. Qian, Formation of anomalously large Al single crystals at triple points during pulsed electric current sintering (PECS) of Al86Ni6Y4.5Co2La1.5 metallic glass, Materials Letters 132 196-199 (2014) [doi: 10.1016/j.matlet.2014.06.077]
  26. G. Serghiou, G. Ji, M. Koch-müller, N. Odling, H. J. Reichmann, J. P. Wright, P. Johnson, Dense Si x Ge 1– x (0 < x < 1) Materials Landscape Using Extreme Conditions and Precession Electron Diffraction, Inorganic Chemistry 53 5656-5662 (2014) [doi: 10.1021/ic500416s]
  27. N. Dauphas, M. Roskosz, E. E. Alp, D. R. Neuville, M. Y. Hu, C. K. Sio, F. L. H. Tissot, J. Zhao, L. Tissandier, E. Médard, C. Cordier, Magma redox and structural controls on iron isotope variations in Earth's mantle and crust, Earth and Planetary Science Letters 398 127-140 (2014) [doi: 10.1016/j.epsl.2014.04.033]
  28. C. Ye, J. B. Vogt, I. P. Serre, Liquid metal embritllement of the T91 steel in lead bismuth eutectic : the role of the loading rate and of the oxygen content in the liquid metal, Materials Science and Engineering: A (2014) [doi: 10.1016/j.msea.2014.04.082]
  29. O. Hamdane, I. Proriol serre, J. B. Vogt, N. Nuns, ToF-SIMS analyses of brittle crack initiation of T91 steel by liquid sodium, Materials Chemistry and Physics 145 243-249 (2014) [doi: 10.1016/j.matchemphys.2014.02.016]
  30. M. N. Avettand-fènoël, A. Simar, R. Shabadi, R. Taillard, B. De meester, Characterization of oxide dispersion strengthened copper based materials developed by friction stir processing, Materials & Design 60 343-357 (2014) [doi: 10.1016/j.matdes.2014.04.012]
  31. M. N. Avettand-fènoël, R. Taillard, J. Laye, T. Odièvre, Experimental Investigation of Three-Dimensional (3-D) Material Flow Pattern in Thick Dissimilar 2050 Friction-Stir Welds, Metallurgical and Materials Transactions A 45 563-578 (2014) [doi: 10.1007/s11661-013-2015-1]
  32. H. Rouchette, L. Thuinet, A. Legris, A. Ambard, C. Domain, Quantitative phase field model for dislocation sink strength calculations, Computational Materials Science 88 50-60 (2014) [doi: 10.1016/j.commatsci.2014.02.011]
  33. R. G. A. Veiga, C. S. Becquart, M. Perez, Comments on “Atomistic modeling of an Fe system with a small concentration of C”, Computational Materials Science 82 118-121 (2014) [doi: 10.1016/j.commatsci.2013.09.048]
  34. J. B. Piochaud, T. P. C. Klaver, G. Adjanor, P. Olsson, C. Domain, C. S. Becquart, First-principles study of point defects in an fcc Fe-10Ni-20Cr model alloy, Physical Review B 89 (2014) [doi: 10.1103/PhysRevB.89.024101]
  35. G. Ji, Z. Tan, R. Shabadi, Z. Li, W. Grünewald, A. Addad, D. Schryvers, D. Zhang, Triple ion beam cutting of diamond/Al composites for interface characterization, Materials Characterization 89 132-137 (2014) [doi: 10.1016/j.matchar.2014.01.008]
  36. J. Kwon, L. Thuinet, M. N. Avettand-fènoël, A. Legris, R. Besson, Point defects and formation driving forces of complex metallic alloys: Atomic-scale study of Al4Cu9, Intermetallics 46 250-258 (2014) [doi: 10.1016/j.intermet.2013.11.023]
  37. Z. Tan, Z. Li, D. B. Xiong, G. Fan, G. Ji, D. Zhang, A predictive model for interfacial thermal conductance in surface metallized diamond aluminum matrix composites, Materials & Design 55 257-262 (2014) [doi: 10.1016/j.matdes.2013.09.060]
2013
  1. G. Vérité, C. Domain, C. C. Fu, P. Gasca, A. Legris, F. Willaime, Self-interstitial defects in hexagonal close packed metals revisited: Evidence for low-symmetry configurations in Ti, Zr, and Hf, Physical Review B 87 (2013) [doi: 10.1103/PhysRevB.87.134108]
  2. B. Diawara, J. Bouquerel, J. B. Vogt, D. Najjar, M. Dubar, J. Chone, J. D. Guerin, P. Quaegebeur, Effect of the forming process on the microstructure of aluminium parts for collective transports, MATEC Web of Conferences 7 01003 (2013) [doi: 10.1051/matecconf/20130701003]
  3. M. Collignon, A. L. Cristol, Y. Desplanques, P. Dufrénoy, G. Regheere, D. Balloy, J. Chone, J. D. Guerin, P. Quaegebeur, Modification de la morphologie du graphite pour l'amélioration de la durée de vie des disques de frein poids lourd, MATEC Web of Conferences 7 01006 (2013) [doi: 10.1051/matecconf/20130701006]
  4. M. Collignon, A. L. Cristol, P. Dufrénoy, Y. Desplanques, D. Balloy, Failure of truck brake discs: A coupled numerical–experimental approach to identifying critical thermomechanical loadings, Tribology International 59 114-120 (2013) [doi: 10.1016/j.triboint.2012.01.001]
  5. M. Collignon, G. Regheere, A. L. Cristol, Y. Desplanques, D. Balloy, Braking performance and influence of microstructure of advanced cast irons for heavy goods vehicle brake discs, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227 930-940 (2013) [doi: 10.1177/1350650113484212]
  6. G. Regheere, M. Collignon, A. L. Cristol, Y. Desplanques, P. Dufrenoy, D. Balloy, Thermocracks®, a Specific Testing Machine for Evaluation of the Thermal Fatigue Resistance of Materials, Procedia Engineering 66 250-263 (2013) [doi: 10.1016/j.proeng.2013.12.080]
  7. F. Housaer, A. Legris, F. Béclin, M. Touzin, D. Tingaud, G. Ji, R. Shabadi, Characterization of Al/MWCNTs composites prepared by powder metallurgy routes, MATEC Web of Conferences 7 01002 (2013) [doi: 10.1051/matecconf/20130701002]
  8. J. B. Vogt, J. Bouquerel, F. Léaux, F. Palleschi, Fatigue Damage Assessment of Alternator Fans by EBSD, Procedia Engineering 66 608-614 (2013) [doi: 10.1016/j.proeng.2013.12.112]
  9. O. Hamdane, J. B. Vogt, I. Proriol-serre, Role of Microstructure on Fracture Behavior of T91 Steel in Presence of Liquid Sodium, Key Engineering Materials 592-593 761-764 (2013) [doi: 10.4028/www.scientific.net/KEM.592-593.761]
  10. V. Jansson, L. Malerba, A. De backer, C. S. Becquart, C. Domain, Sink strength calculations of dislocations and loops using OKMC, Journal of Nuclear Materials 442 218-226 (2013) [doi: 10.1016/j.jnucmat.2013.08.052]
  11. J. B. Vogt, I. Proriol-serre, Fatigue Behaviour of a Martensitic and an Austenitic Steel in Heavy Liquid Metals, Procedia Engineering 55 812-818 (2013) [doi: 10.1016/j.proeng.2013.03.336]
  12. S. Daviðsdóttir, K. Dirscherl, S. Canulescu, R. Shabadi, R. Ambat, Nanoscale surface potential imaging of the photocatalytic TiO2 films on aluminum, RSC Advances (2013) [doi: 10.1039/c3ra43082k]
  13. R. Shabadi, R. Ambat, E. S. Dwarakadasa, AZ91C Magnesium Alloy Modified by Cd, Materials & Design (2013) [doi: 10.1016/j.matdes.2013.07.032]
  14. R. Besson, L. Favergeon, Atomic-Scale Study of Calcite Nucleation in Calcium Oxide, The Journal of Physical Chemistry C 117 8813-8821 (2013) [doi: 10.1021/jp4002252]
  15. J. Zou, C. Buckley, H. Shao, G. Ji, K. Zhang, Light-Metal-Based Nanostructures for Energy and Biomedical Applications, Journal of Nanomaterials 2013 1-2 (2013) [doi: 10.1155/2013/203542]
  16. Y. Wu, C. Cordier, E. Berrier, N. Nuns, C. Dujardin, P. Granger, Surface reconstructions of LaCo1−xFexO3 at high temperature during N2O decomposition in realistic exhaust gas composition: Impact on the catalytic properties, Applied Catalysis B: Environmental 140-141 151-163 (2013) [doi: 10.1016/j.apcatb.2013.04.002]
  17. L. Thuinet, A. Legris, L. Zhang, A. Ambard, Mesoscale modeling of coherent zirconium hydride precipitation under an applied stress, Journal of Nuclear Materials 438 32-40 (2013) [doi: 10.1016/j.jnucmat.2013.02.034]
  18. G. Ji, J. P. Morniroli, Electron diffraction characterization of a new metastable Al2Cu phase in an Al–Cu friction stir weld, Journal of Applied Crystallography 46 430-442 (2013) [doi: 10.1107/S0021889813001635]
  19. X. P. Li, M. Yan, G. Ji, M. Qian, Applied Pressure on Altering the Nano-Crystallization Behavior of Al86Ni6Y4.5Co2La1.5 Metallic Glass Powder during Spark Plasma Sintering and Its Effect on Powder Consolidation, Journal of Nanomaterials 2013 1-6 (2013) [doi: 10.1155/2013/101508]
  20. Z. Chen, G. Ji, N. Prud’homme, A. Addad, V. Ji, J. Chevalier, G. Bernard-granger, Stabilization of the tetragonal phase in large columnar zirconia crystals without incorporating dopants, Scripta Materialia 68 559-562 (2013) [doi: 10.1016/j.scriptamat.2012.11.028]
  21. R. Shabadi, M. Suery, A. Deschamps, Characterization of Joints Between Aluminum and Galvanized Steel Sheets, Metallurgical and Materials Transactions A (2013) [doi: 10.1007/s11661-012-1605-7]
  22. Z. Tan, Z. Li, G. Fan, Q. Guo, X. Kai, G. Ji, L. Zhang, D. Zhang, Enhanced thermal conductivity in diamond/aluminum composites with a tungsten interface nanolayer, Materials & Design 47 160-166 (2013) [doi: 10.1016/j.matdes.2012.11.061]
  23. Z. Tan, Z. Li, G. Fan, X. Kai, G. Ji, L. Zhang, D. Zhang, Fabrication of diamond/aluminum composites by vacuum hot pressing: Process optimization and thermal properties, Composites Part B: Engineering 47 173-180 (2013) [doi: 10.1016/j.compositesb.2012.11.014]
  24. R. G. A. Veiga, M. Perez, C. S. Becquart, C. Domain, Atomistic modeling of carbon Cottrell atmospheres in bcc iron, Journal of Physics: Condensed Matter 25 025401 (2013) [doi: 10.1088/0953-8984/25/2/025401]
  25. Z. Tan, Z. Li, G. Fan, X. Kai, G. Ji, L. Zhang, D. Zhang, Diamond/aluminum composites processed by vacuum hot pressing: Microstructure characteristics and thermal properties, Diamond and Related Materials 31 1-5 (2013) [doi: 10.1016/j.diamond.2012.10.008]
  26. M. Rieth, S. L. Dudarev, S. M. Gonzalez de vicente, J. Aktaa, T. Ahlgren, S. Antusch, D. E. J. Armstrong, M. Balden, N. Baluc, M. F. Barthe, W. W. Basuki, M. Battabyal, C. S. Becquart, D. Blagoeva, H. Boldyryeva, J. Brinkmann, M. Celino, L. Ciupinski, J. B. Correia, A. De backer, C. Domain, E. Gaganidze, C. García-rosales, J. Gibson, M. R. Gilbert, S. Giusepponi, B. Gludovatz, H. Greuner, K. Heinola, T. Höschen, A. Hoffmann, N. Holstein, F. Koch, W. Krauss, H. Li, S. Lindig, J. Linke, C. Linsmeier, P. López-ruiz, H. Maier, J. Matejicek, T. P. Mishra, M. Muhammed, A. Muñoz, M. Muzyk, K. Nordlund, D. Nguyen-manh, J. Opschoor, N. Ordás, T. Palacios, G. Pintsuk, R. Pippan, J. Reiser, J. Riesch, S. G. Roberts, L. Romaner, M. Rosiński, M. Sanchez, W. Schulmeyer, H. Traxler, A. Ureña, J. G. Van der laan, L. Veleva, S. Wahlberg, M. Walter, T. Weber, T. Weitkamp, S. Wurster, M. A. Yar, J. H. You, A. Zivelonghi, Recent progress in research on tungsten materials for nuclear fusion applications in Europe, Journal of Nuclear Materials 432 482-500 (2013) [doi: 10.1016/j.jnucmat.2012.08.018]
  27. G. Ji, F. Bernard, S. Launois, T. Grosdidier, Processing conditions, microstructure and mechanical properties of hetero-nanostructured ODS FeAl alloys produced by spark plasma sintering, Materials Science and Engineering: A 559 566-573 (2013) [doi: 10.1016/j.msea.2012.08.142]
2012
  1. M. L. Lescoat, J. Ribis, A. Gentils, O. Kaïtasov, Y. De carlan, A. Legris, In situ TEM study of the stability of nano-oxides in ODS steels under ion-irradiation, Journal of Nuclear Materials 428 176-182 (2012) [doi: 10.1016/j.jnucmat.2011.12.009]
  2. R. Besson, M. Rocha vargas, L. Favergeon, CO2 adsorption on calcium oxide: An atomic-scale simulation study, Surface Science 606 490-495 (2012) [doi: 10.1016/j.susc.2011.11.016]
  3. A. De backer, C. J. Ortiz, C. Domain, M. F. Barthe, C. S. Becquart, Spatial effects in the 800keV 3He implantation in W followed by isochronal annealing at 900K, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms (2012) [doi: 10.1016/j.nimb.2012.10.025]
  4. A. De backer, P. E. Lhuillier, C. S. Becquart, M. F. Barthe, Modelling of the implantation and the annealing stages of 800keV 3He implanted tungsten: Formation of nanovoids in the near surface region, Journal of Nuclear Materials 429 78-91 (2012) [doi: 10.1016/j.jnucmat.2012.05.024]
  5. R. Shabadi, S. Suwas, S. Kumar, H. J. Roven, E. S. Dwarkadasa, Texture and formability studies on AA7020 Al alloy sheets, Materials Science and Engineering: A 558 439-445 (2012) [doi: 10.1016/j.msea.2012.08.024]
  6. K. M. Rehouma, R. Shabadi, R. Taillard, M. Bouabdallah, A. Imad, Effect of Aging at 700°C on Ferrite Transformation in a 316L/308L Weldment, Materials and Manufacturing Processes 27 1370-1375 (2012) [doi: 10.1080/10426914.2012.663134]
  7. A. Daoud, J. B. Vogt, E. Charkaluk, J. Bouquerel, L. Zhang, J. C. Biasci, Anisotropy effects on the tensile and fatigue behaviour of an oxide dispersion strengthened copper alloy, Materials Science and Engineering: A 534 640-648 (2012) [doi: 10.1016/j.msea.2011.12.021]
  8. J. Zou, H. Sun, X. Zeng, G. Ji, W. Ding, Preparation and Hydrogen Storage Properties of Mg-Rich Mg-Ni Ultrafine Particles, Journal of Nanomaterials 2012 1-8 (2012) [doi: 10.1155/2012/592147]
  9. C. Cordier, J. Foct, Influence of concentration in interstitial elements on mechanical alloying of Fe-C powder mixtures, Powder Metallurgy 55 273-279 (2012) [doi: 10.1179/1743290112Y.0000000008]
  10. M. N. Avettand-fenoël, R. Taillard, G. Ji, D. Goran, Multiscale Study of Interfacial Intermetallic Compounds in a Dissimilar Al 6082-T6/Cu Friction-Stir Weld, Metallurgical and Materials Transactions A 43 4655-4666 (2012) [doi: 10.1007/s11661-012-1277-3]
  11. R. Shabadi, S. Suwas, S. Kumar, H. J. Roven, E. S. Dwarkadasa, Texture and formability studies on AA7020 Al alloy sheets, Materials Science and Engineering: A 558 439-445 (2012) [doi: 10.1016/j.msea.2012.08.024]
  12. D. Jacob, G. Ji, J. P. Morniroli, A systematic method to identify the space group from PED and CBED patterns part II – practical examples, Ultramicroscopy 121 61-71 (2012) [doi: 10.1016/j.ultramic.2012.04.015]
  13. J. P. Morniroli, G. Ji, D. Jacob, A systematic method to identify the space group from PED and CBED patterns part I - theory, Ultramicroscopy 121 42-60 (2012) [doi: 10.1016/j.ultramic.2012.04.008]
  14. F. Lebel, E. Abdi-aad, B. Duponchel, I. Proriol-serre, S. Ringot, P. Langry, A. Aboukaïs, Thermal ageing process at laboratory scale to evaluate the lifetime of Liquefied Natural Gas storage and loading/unloading materials, Materials & Design (2012) [doi: 10.1016/j.matdes.2012.07.043]
  15. L. Thuinet, A. De backer, A. Legris, Phase-field modeling of precipitate evolution dynamics in elastically inhomogeneous low-symmetry systems: Application to hydride precipitation in Zr, Acta Materialia 60 5311-5321 (2012) [doi: 10.1016/j.actamat.2012.05.041]
  16. L. Thuinet, R. Besson, New insights on strain energies in hexagonal systems, Applied Physics Letters 100 251902 (2012) [doi: 10.1063/1.4729426]
  17. L. Thuinet, R. Besson, Ab initio study of competitive hydride formation in zirconium alloys, Intermetallics 20 24-32 (2012) [doi: 10.1016/j.intermet.2011.08.005]
  18. C. S. Becquart, C. Domain, Solute–point defect interactions in bcc systems: Focus on first principles modelling in W and RPV steels, Current Opinion in Solid State and Materials Science (2012) [doi: 10.1016/j.cossms.2012.01.001]
  19. R. Ngayam-happy, C. S. Becquart, C. Domain, L. Malerba, Formation and evolution of MnNi clusters in neutron irradiated dilute Fe alloys modelled by a first principle-based AKMC method, Journal of Nuclear Materials 426 198-207 (2012) [doi: 10.1016/j.jnucmat.2012.03.033]
  20. M. N. Avettand-fènoël, R. Taillard, G. Ji, Quality of Interfaces in Cu/Al Dissimilar Friction-Stirred Welds, Materials Science Forum 706-709 959-964 (2012) [doi: 10.4028/www.scientific.net/MSF.706-709.959]
2011
  1. A. Ollivier-leduc, M. L. Giorgi, D. Balloy, J. B. Guillot, Study of selective oxidation by means of glow discharge optical emission spectroscopy, Corrosion Science 53 1375-1382 (2011) [doi: 10.1016/j.corsci.2011.01.012]
  2. A. Chahadih, H. El hamzaoui, R. Bernard, L. Bois, F. Beclin, O. Cristini, B. Capoen, M. Bouazaoui, Continuous laser direct-writing of PbS nanoparticles inside transparent silica monoliths, Journal of Nanoparticle Research 13 6507-6515 (2011) [doi: 10.1007/s11051-011-0554-1]
  3. L. Holliger, R. Besson, Reciprocal-space cluster expansions for complex alloys with long-range interactions, Physical Review B 83 p. 174202 (2011) [doi: 10.1103/PhysRevB.83.174202]
  4. H. J. Fitting, M. Touzin, E. Schreiber, Fast electron beam charge injection and switching in dielectrics, physica status solidi (c) 8 1282-1286 (2011) [doi: 10.1002/pssc.201084003]
  5. C. S. Becquart, M. F. Barthe, A. De backer, Modelling radiation damage and He production in tungsten, Physica Scripta T145 014048 (2011) [doi: 10.1088/0031-8949/2011/T145/014048]
  6. D. Goran, G. Ji, M. N. Avettand-fènoël, R. Taillard, Texture and Microstructure Evolution in Friction Stir Welded Cu-Al Sheets Characterized by EBSD, Materials Science Forum 702-703 574-577 (2011) [doi: 10.4028/www.scientific.net/MSF.702-703.574]
  7. M. Rieth, J. L. Boutard, S. L. Dudarev, T. Ahlgren, S. Antusch, N. Baluc, M. F. Barthe, C. S. Becquart, L. Ciupinski, J. B. Correia, C. Domain, J. Fikar, E. Fortuna, C. C. Fu, E. Gaganidze, T. L. Galán, C. García-rosales, B. Gludovatz, H. Greuner, K. Heinola, N. Holstein, N. Juslin, F. Koch, W. Krauss, K. J. Kurzydlowski, J. Linke, C. Linsmeier, N. Luzginova, H. Maier, M. S. Martínez, J. M. Missiaen, M. Muhammed, A. Muñoz, M. Muzyk, K. Nordlund, D. Nguyen-manh, P. Norajitra, J. Opschoor, G. Pintsuk, R. Pippan, G. Ritz, L. Romaner, D. Rupp, R. Schäublin, J. Schlosser, I. Uytdenhouwen, J. G. Van der laan, L. Veleva, L. Ventelon, S. Wahlberg, F. Willaime, S. Wurster, M. A. Yar, Review on the EFDA programme on tungsten materials technology and science, Journal of Nuclear Materials 417 463-467 (2011) [doi: 10.1016/j.jnucmat.2011.01.075]
  8. A. Souidi, M. Hou, C. S. Becquart, L. Malerba, C. Domain, R. E. Stoller, On the correlation between primary damage and long-term nanostructural evolution in iron under irradiation, Journal of Nuclear Materials (2011) [doi: 10.1016/j.jnucmat.2011.08.049]
  9. R. G. A. Veiga, M. Perez, C. S. Becquart, E. Clouet, C. Domain, Comparison of atomistic and elasticity approaches for carbon diffusion near line defects in α-iron, Acta Materialia 59 6963-6974 (2011) [doi: 10.1016/j.actamat.2011.07.048]
  10. R. Shabadi, R. Taillard, B. Radiguet, J. De baerdemaeker, E. Leunis, Effect of Mn on the Nanoprecipitation in Binary Fe-Cu alloys, Solid State Phenomena 172-174 297-302 (2011) [doi: 10.4028/www.scientific.net/SSP.172-174.297]
  11. O. Hamdane, J. Bouquerel, I. Proriol-serre, J. B. Vogt, Effect of heat treatment on liquid sodium embrittlement of T91 martensitic steel, Journal of Materials Processing Technology 211 2085-2090 (2011) [doi: 10.1016/j.jmatprotec.2011.07.006]
  12. H. J. Fitting, M. Touzin, Secondary electron emission and self-consistent charge transport in semi-insulating samples, Journal of Applied Physics 110 044111 (2011) [doi: 10.1063/1.3608151]
  13. L. Thuinet, A. Legris, Zêta Hydride Precipitation in Zirconium Alloys: an Example of Elastically Driven Morphology of Coherent Trigonal Precipitates inside a Сlose-Packed Hexagonal Matrix, Solid State Phenomena 172-174 248-253 (2011) [doi: 10.4028/www.scientific.net/SSP.172-174.248]
  14. F. Z. Bouanis, F. Bentiss, S. Bellayer, J. B. Vogt, C. Jama, Radiofrequency cold plasma nitrided carbon steel: Microstructural and micromechanical characterizations, Materials Chemistry and Physics 127 329-334 (2011) [doi: 10.1016/j.matchemphys.2011.02.013]
  15. I. Proriol-serre, I. Diop, N. David, M. Vilasi, J. B. Vogt, Mechanical behavior of coated T91 steel in contact with lead–bismuth liquid alloy at 300°C, Surface and Coatings Technology 205 4521-4527 (2011) [doi: 10.1016/j.surfcoat.2011.03.089]
  16. M. I. Pascuet, N. Castin, C. S. Becquart, L. Malerba, Stability and mobility of Cu–vacancy clusters in Fe–Cu alloys: A computational study based on the use of artificial neural networks for energy barrier calculations, Journal of Nuclear Materials 412 106-115 (2011) [doi: 10.1016/j.jnucmat.2011.02.038]
  17. T. Auger, D. Gorse, Z. Hamouche-hadjem, J. Van den bosch, G. Coen, A. Almazouzi, A. Hojna, K. Dalikova, F. Di gabriele, M. Serrano, A. Gessi, P. Agostini, J. B. Vogt, I. Serre, Fracture mechanics behavior of the T91 Martensiticsteel in contact with liquid lead-bismuth eutectic for application in an Accelerator Driven System, Journal of Nuclear Materials 415 293-301 (2011) [doi: 10.1016/j.jnucmat.2011.04.021]
  18. D. Gorse, T. Auger, J. B. Vogt, I. Serre, A. Weisenburger, A. Gessi, P. Agostini, C. Fazio, A. Hojna, F. Di gabriele, J. Van den bosch, G. Coen, A. Almazouzi, M. Serrano, Influence of liquid Lead and Lead-Bismuth Eutectic on tensile, fatigue and creep properties of Ferritic/Martensitic and austenitic steels for Transmutation Systems, Journal of Nuclear Materials 415 284-292 (2011) [doi: 10.1016/j.jnucmat.2011.04.047]
  19. M. Touzin, F. Béclin, Fabrication and characterization of composite sol–gel coatings on porous ceramic substrate, Journal of the European Ceramic Society 31 1661-1667 (2011) [doi: 10.1016/j.jeurceramsoc.2011.03.002]
  20. C. S. Becquart, C. Domain, Modeling Microstructure and Irradiation Effects, Metallurgical and Materials Transactions A 42 852-870 (2011) [doi: 10.1007/s11661-010-0460-7]
  21. J. P. Dacquin, C. Lancelot, C. Dujardin, C. Cordier-robert, P. Granger, Support-Induced Effects of LaFeO3Perovskite on the Catalytic Performances of Supported Pt Catalysts in DeNOxApplications, The Journal of Physical Chemistry C 115 110106145700062 (2011) [doi: 10.1021/jp1069779]
  22. M. Balbi, S. Hereñú, I. Proriol-serre, J. B. Vogt, A. F. Armas, I. Alvarez-armas, Initiation and Growth of Short Cracks during Cycling in an Aged Superduplex Stainless Steel, Key Engineering Materials 465 411-414 (2011) [doi: 10.4028/www.scientific.net/KEM.465.411]
  23. G. Ji, D. Jacob, J. P. Morniroli, The state of order in Fe-Al studied by precession electron diffraction, Philosophical Magazine Letters 91 57-63 (2011) [doi: 10.1080/09500839.2010.524898]
2010
  1. A. Ollivier-leduc, M. L. Giorgi, D. Balloy, J. B. Guillot, Nucleation and growth of selective oxide particles on ferritic steel, Corrosion Science 52 2498-2504 (2010) [doi: 10.1016/j.corsci.2010.03.030]
  2. D. Balloy, J. C. Tissier, M. L. Giorgi, M. Briant, Corrosion Mechanisms of Steel and Cast Iron by Molten Aluminum, Metallurgical and Materials Transactions A 41 2366-2376 (2010) [doi: 10.1007/s11661-010-0306-3]
  3. V. Petit, A. Le rouge, F. Béclin, H. El hamzaoui, L. Bigot, Experimental Study of SiO2Soot Deposition using the Outside Vapor Deposition Method, Aerosol Science and Technology 44 388-394 (2010) [doi: 10.1080/02786821003671315]
  4. D. Tingaud, F. Nardou, R. Besson, Diffusion in complex ordered alloys: Atomic-scale investigation of NiAl_{3}, Physical Review B 81 p. 174108 (2010) [doi: 10.1103/PhysRevB.81.174108]
  5. H. J. Fitting, M. Touzin, Time-dependent start-up and decay of secondary electron emission in dielectrics, Journal of Applied Physics 108 033711 (2010) [doi: 10.1063/1.3460284]
  6. R. Ngayam-happy, P. Olsson, C. S. Becquart, C. Domain, Isochronal annealing of electron-irradiated dilute Fe alloys modelled by an ab initio based AKMC method: Influence of solute–interstitial cluster properties, Journal of Nuclear Materials 407 16-28 (2010) [doi: 10.1016/j.jnucmat.2010.07.004]
  7. L. Malerba, M. C. Marinica, N. Anento, C. Björkas, H. Nguyen, L. Ventelon, C. Domain, F. Djurabekova, P. Olsson, K. Nordlund, A. Serra, D. Terentyev, F. Willaime, C. S. Becquart, Comparison of empirical interatomic potentials for iron applied to radiation damage studies, Journal of Nuclear Materials 406 19 (2010) [doi: 10.1016/j.jnucmat.2010.05.017]
  8. F. Soisson, C. S. Becquart, N. Castin, C. Domain, L. Malerba, E. Vincent, Atomistic Kinetic Monte Carlo Studies of Microchemical Evolutions driven by Diffusion Processes under Irradiation, Journal of Nuclear Materials 406 55 (2010) [doi: 10.1016/j.jnucmat.2010.05.018]
  9. L. Malerba, G. J. Ackland, C. S. Becquart, G. Bonny, C. Domain, S. Dudarev, C. . Fu, D. Hepburn, M. C. Marinica, P. Olsson, R. C. Pasianot, J. M. Raulot, F. Soisson, D. Terentyev, E. Vincent, F. Willaime, Ab initio calculations and interatomic potentials for iron and iron alloys: achievements within the FP6/Perfect project, Journal of Nuclear Materials 406 7 (2010) [doi: 10.1016/j.jnucmat.2010.05.016]
  10. C. S. Becquart, A. Barbu, J. L. Bocquet, M. J. Caturla, C. Domain, C. C. Fu, S. I. Golubov, M. Hou, L. Malerba, C. J. Ortiz, A. Souidi, R. E. Stoller, Modeling the long-term evolution of the primary damage in ferritic alloys using coarse-grained methods, Journal of Nuclear Materials 406 39 (2010) [doi: 10.1016/j.jnucmat.2010.05.019 ]
  11. A. Daoud, J. B. Vogt, E. Charkaluk, L. Zhang, J. C. Biasci, Effect of temperature on the low cycle fatigue behavior of Glidcop Al-15, Procedia Engineering 2 1487-1495 (2010) [doi: 10.1016/j.proeng.2010.03.160]
  12. H. Bultel, J. B. Vogt, Influence of heat treatment on fatigue behaviour of 4130 AISI steel, Procedia Engineering 2 917-924 (2010) [doi: 10.1016/j.proeng.2010.03.099]
  13. D. Tingaud, F. Nardou, R. Besson, Critical effect of local pressure on jump frequencies in intermetallics, Scripta Materialia 62 727-730 (2010) [doi: 10.1016/j.scriptamat.2010.02.007]
  14. R. Veiga, M. Perez, C. Becquart, C. Domain, S. Garruchet, Effect of the stress field of an edge dislocation on carbon diffusion in α-iron: Coupling molecular statics and atomistic kinetic Monte Carlo, Physical Review B 82 054103 (2010) [doi: 10.1103/PhysRevB.82.054103]
  15. M. Hou, C. J. Ortiz, C. S. Becquart, C. Domain, U. Sarkar, A. Debacker, Microstructure evolution of irradiated tungsten: Crystal effects in He and H implantation as modelled in the Binary Collision Approximation, Journal of Nuclear Materials 403 89-100 (2010) [doi: 10.1016/j.jnucmat.2010.06.004]
  16. C. S. Becquart, C. Domain, U. Sarkar, A. Debacker, M. Hou, Microstructural evolution of irradiated tungsten: Ab initio parameterisation of an OKMC model, Journal of Nuclear Materials 403 75-88 (2010) [doi: 10.1016/j.jnucmat.2010.06.003]
  17. C. S. Becquart, C. Domain, Introducing chemistry in atomistic kinetic Monte Carlo simulations of Fe alloys under irradiation, Physica Status Solidi 247 9 (2010) [doi: 10.1002/pssb.200945251]
  18. T. Grosdidier, D. Goran, G. Ji, N. Llorca, On the processing of hetero-nanostructured metals for improved strength/ductility balance by ECAE and SPS techniques, Journal of Alloys and Compounds 504S S456-S459 (2010) [doi: 10.1016/j.jallcom.2010.03.035]
  19. J. V. Slycken, J. Bouquerel, P. Verleysen, K. Verbeken, J. Degrieck, Y. Houbaert, Static and impact-dynamic characterization of multiphase TRIP steels, Materials Science Forum 638-642 3585-3590 (2010) [doi: 10.4028/www.scientific.net/MSF.638-642.3585]
  20. R. Petrov, J. Bouquerel, K. Verbeken, L. Kestens, P. Verleysen, Y. Houbaert, OIM Analysis of Microstructure and Texture of a TRIP Assisted Steel after Static and Dynamic Deformation, Materials Science Forum 638-642 3447-3452 (2010) [doi: 10.4028/www.scientific.net/MSF.638-642.3447]
  21. L. Thuinet, A. Legris, Elastically driven morphology of coherent trigonal precipitates inside a close-packed hexagonal matrix, Acta Materialia 58 2250-2261 (2010) [doi: 10.1016/j.actamat.2009.12.012]
  22. G. Serghiou, A. J. Mcgaff, N. Russell, J. P. Morniroli, D. J. Frost, N. Odling, R. Boehler, D. Troadec, C. Lathe, Extreme conditions synthesis, processing and characterization of metal-nitrides and alloys of mechanical and optoelectronic importance, Journal of Physics: Conference Series 215 012128 (2010) [doi: 10.1088/1742-6596/215/1/012128]
  23. G. Serghiou, C. L. Guillaume, C. E. Jeffree, A. Thomson, D. J. Frost, J. P. Morniroli, N. Odling, Imaging of mixing and reaction in group IV systems recovered from high pressures and temperatures, High Pressure Research 30 44–50 (2010) [doi: 10.1080/08957950903565960]
  24. J. P. Morniroli, P. Stadelmann, G. Ji, S. Nicolopoulos, The symmetry of precession electron diffraction patterns, Journal of Microscopy 237 511-515 (2010) [doi: 10.1111/j.1365-2818.2009.03311.x]
  25. M. N. Avettand-fènoël, R. Taillard, C. Herbelot, A. Imad, Structure and Mechanical Properties of Friction-Stirred Beads of 6082-T6 Al Alloy and Pure Copper, Material Science Forum 638-642 1209-1214 (2010) [doi: 10.4028/www.scientific.net/MSF.638-642.1209]
  26. R. Taillard, Problems and promises of metal matrix composites, Material Science Forum 638-642 154-159 (2010) [doi: 10.4028/www.scientific.net/MSF.638-642.154]
  27. R. Besson, Point defects in multicomponent ordered alloys: Methodological issues and working equations, Acta Materialia 58 379 (2010) [doi: 10.1016/j.actamat.2009.09.014]
  28. M. Touzin, D. Geuriot, C. Guerret-piécourt, D. Juvé, H. J. Fitting, Alumina based ceramics for high-voltage insulation, Journal of the European Ceramic Society 30 805-817 (2010) [doi: 10.1016/j.jeurceramsoc.2009.09.025]
2009
  1. B. N. S. Bhaktha, C. Kinowski, M. Bouazaoui, B. Capoen, O. Robbe-cristini, F. Beclin, P. Roussel, M. Ferrari, S. Turrell, Controlled Growth of SnO2Nanocrystals in Eu3+-Doped SiO2−SnO2Planar Waveguides: A Spectroscopic Investigation, The Journal of Physical Chemistry C 113 21555-21559 (2009) [doi: 10.1021/jp907764p]
  2. I. Serre, J. B. Vogt, Mechanical properties of a 316L/T91 weld joint tested in lead–bismuth liquid, Materials & Design 30 3776-3783 (2009) [doi: 10.1016/j.matdes.2009.01.038]
  3. G. Ji, J. P. Morniroli, G. J. Aucherlonie, J. Drnnan, D. Jacob, An efficient approach to characterize pseudo-merohedral twins by precession electron diffraction: application to the LaGaO3 perovskite, Ultramicroscopy 109 1282-1294 (2009) [doi: 10.1016/j.ultramic.2009.05.014]
  4. M. N. Avettand-fènoël, C. Cordier, G. Guillemot, F. Goodwin, J. Foct, Feature of solid-liquid metals reaction revealed by conversion electron Mössbauer spectrometry, Hyperfine Interactions 190 29-36 (2009) [doi: 10.1007/ s10751-009-9918-7]
  5. J. Foct, C. Cordier, Ball Milling induced interstitial atoms redistributions revealed by Mössbauer effect in Fe bases alloys, Hyperfine Interactions 190 15-22 (2009) [doi: 10.1007/s10751-009-9916-9]
  6. L. Thuinet, H. Combeau, A New Model of Microsegregation for Macrosegregation Computation in Multicomponent Steels. Part I: Theoretical Formulation and Algorithm, Computational Materials Science 45 294-304 (2009) [doi: 10.1016/j.commatsci.2008.09.023]
  7. L. Thuinet, H. Combeau, A New Model of Microsegregation for Macrosegregation Computation in Multicomponent Steels. Part II: Application to Fe-Ni-C Alloys, Computational Materials Science 45 285-293 (2009) [doi: 10.1016/j.commatsci.2008.09.026]
  8. G. E. Stan, C. O. Morosanu, D. A. Marcov, I. Pasuk, F. Miculescu, G. Reumont, Effect of annealing upon the structure and adhesion properties of sputtered bio-glass/titanium coatings, Applied Surface Science 255 9132-9138 (2009) [doi: 10.1016/j.apsusc.2009.06.117]
  9. L. Holliger, A. Legris, R. Besson, Hexagonal-based ordered phases in H-Zr, Physical Review B 80 094111 (2009) [doi: 10.1103/PhysRevB.80.094111]
  10. D. Tingaud, R. Besson, Point defect phonons in intermetallics: NiAl3 by atomic-scale simulation, Physica Status Solidi C 6 2008 (2009) [doi: 10.1002/pssc.200881765]
  11. C. S. Becquart, C. Domain, A density functional theory assessment of the clustering behaviour of He and H in tungsten, Journal of Nuclear Materials 386 109 (2009) [doi: 10.1016/j.jnucmat.2008.12.085]
  12. C. S. Becquart, C. Domain, An object Kinetic Monte Carlo simulation of the dynamics of He and point defects in tungsten, Journal of Nuclear Materials 385 223 (2009) [doi: 10.1016/j.jnucmat.2008.11.027]
  13. D. Hourlier, P. Lefebvre-legry, P. Perrot, Preparation of Silicon-based nanowires and the thermochemistry of the process, JEEP Proceedings 00002 1-4 (2009) [doi: 10.1051]
  14. M. N. Avettand-fÈnoËl, G. Reumont, P. Perrot, Ball milling as a possible means to produce zinc based coatings, International Journal of Material Research 100 1582-1592 (2009) [doi: 10.3139/146.110216 ]
  15. D. Hourlier, B. Legrand, C. Boyaval, P. Perrot, Towards silicon-nanowire-structured materials by the intimate mixing of patterning the solid state and chemical reactions, Journal of Nano Research 6 215-224 (2009) [doi: 10.4028/www.scientific.net/JNanoR.6.215]
  16. S. N. B. Bhaktha, C. Armellini, F. Beclin, M. Bouazaoui, B. Capoen, A. Chiappini, A. Chiasera, M. Ferrari, Y. Jestin, C. Kinowski, E. Moser, D. N. Rao, G. C. Righini, S. Turrell, SiO2-SnO2 glass-ceramic planar waveguides activated by rare earth ions, Proceedings of SPIE 7212 721207-1 - 721207-7 (2009) [doi: 10.1117/12.808277]
  17. A. Mussi, G. Bernard granger, A. Addad, N. Benameur, F. Beclin, A. Bataille, Inversion defects in MgAl2O4 elaborated by pressureless sintering, pressureless sintering plus hot isostatic pressing, and spark plasma sintering, Scripta Materialia 61 516-519 (2009) [doi: 10.1016/j.scriptamat.2009.05.011]
  18. H. J. Fitting, N. Cornet, M. Touzin, D. Goeuriot, C. Guerret-piécourt, D. Juvé, D. Tréheux, Injection of charge nanostructures into insulators, Superlattices and Microstructures 45 200-205 (2009) [doi: 10.1016/j.spmi.2008.10.009]
  19. N. Cornet, D. Goeuriot, M. Touzin, C. Guerret-piécourt, D. Juvé, D. Tréheux, H. J. Fitting, Electron beam probing of silica surface layers on alumina, Journal of Non-Crystalline Solids 355 1111-1114 (2009) [doi: 10.1016/j.jnoncrysol.2009.03.007]
  20. N. Nuns, F. Béclin, J. Crampon, Grain-Boundary Characterization in a Nonstoichiometric Fine-Grained Magnesium Aluminate Spinel : Effects of Defect Segregation at the Space-Charge Layers, Journal of the American Ceramic Society 92 870–875 (2009) [doi: 10.1111/j.1551-2916.2008.02901.x]
2008
  1. M. Briant, D. Balloy, Combined analysis with WDS/EDS spectrometers in SEM, The European Physical Journal Applied Physics 44 37-42 (2008) [doi: 10.1051/epjap:2008146]
  2. J. Bouquerel, K. Verbeken, J. V. Slycken, P. Verleysen, Y. Houbaert, Physically based modeling of the behaviour of TRIP steels International Journal of Material Forming, International Journal of Material Forming 1 57-60 (2008) [doi: 10.1007/s12289-008-0047-7]
  3. J. Bouquerel, K. Verbeken, D. Krizan, L. Barbe, P. Verleysen, Y. Houbaert, Evaluation of the static stress-strain behaviour of phosphorus alloyed and titanium micro-alloyed TRIP steels, Steel Research International 10 79 (2008) [doi: 10.2374/SRI08SP01]
  4. I. Proriol-serre, J. B. Vogt, Heat Treatment Effect of T91 martensitic steel on Liquid Metal Embrittlement, Journal of Nuclear Materials 376 330–335 (2008) [doi: 10.1016/j.jnucmat.2008.02.018]
  5. T. Auger, I. Proriol-serre, G. Lorang, Z. Hamouche, D. Gorse, J. B. Vogt, Role of oxidation on LME of T91 steel studied by Small Punch Test, Journal of Nuclear Materials 376 336-340 (2008) [doi: 10.1016/j.jnucmat.2008.02.076]
  6. I. Proriol-serre, D. Salazar, J. B. Vogt, Atomic Force Microscopy investigation of surface relief in individual phases of deformed Duplex Stainless Steel, Materials Science and Engineering 492 428-433 (2008) [doi: 10.1016/j.msea.2008.04.060]
  7. C. Cordier, B. Forfert, B. Bolle, J. J. Fundenberger, A. Tidu, Influence of torsion deformation on microstructure of cold drawn pearlitic steel wire, Journal of Materials Science 43 1241-1248 (2008) [doi: 10.1007/s10853-007-2272-8]
  8. Z. Zhao, J. P. Morniroli, A. Legris, A. Ambard, Y. Khin, L. Legras, M. Blat-yrieix, Identification and characterization of a new zirconium hydride, Journal of Microscopy 232 410-421 (2008) [doi: 10.1111/j.1365-2818.2008.02136.x]
  9. A. Rabhi, R. Taillard, C. Verwaerde, A 3D finite element analysis of the drawing of multifilamentary composites, Steel Research International 2 506-512 (2008)
  10. R. Besson, A. Legris, D. Connétable, P. Maugis, Atomic-scale study of low-temperature equilibria in iron-rich Al-C-Fe, Physical Review B 78 014204 (2008) [doi: 10.1103/PhysRevB.78.014204]
  11. E. Vincent, C. S. Becquart, C. Domain, Microstructural evolution under high flux irradiation of dilute Fe-CuNiMnSi alloys studied by atomic kinetic Monte Carlo model accounting for both vacancies and self interstitials, Journal of Nuclear Materials 382 154 (2008) [doi: 10.1016/j.jnucmat.2008.08.019]
  12. R. E. Stoller, S. I. Golubov, C. Domain, C. S. Becquart, Mean field rate theory and object kinetic Monte Carlo : a comparison of kinetic models, Journal of Nuclear Materials 382 77 (2008) [doi: 10.1016/j.jnucmat.2008.08.047]
  13. M. Hou, A. Souidi, C. S. Becquart, C. Domain, L. Malerba, Relevancy of displacement cascades features to the long term point defect cluster growth, Journal of Nuclear Materials 382 103 (2008) [doi: 10.1016/j.jnucmat.2008.08.034]
  14. D. Hourlier, P. Perrot, The Answer to the Challenging Question: Is there a size limit of Nanowires?, Journal of Nano Research 4 135-144 (2008) [doi: 10.4028/www.scientific.net/JNanoR.4.135]
  15. R. Fourmentin, M. N. Avettand-fÈnoËl, G. Reumont, P. Perrot, The Fe-Zn-Al-Cr system and its impact on the galvanizing process in chromium-added zinc baths, Journal of Materials Science 43 6872-6880 (2008) [doi: 10.1007/s10853-008-3011-5]
  16. M. N. Avettand-fÈnoËl, A. Hadadi, G. Reumont, P. Perrot, Experimental Zn rich corner of Fe-Zn-Cu ternary phase diagram at 460°C, Journal of Materials Science 43 1740-1744 (2008) [doi: 10.1007/s10853-007-2413-0]
  17. S. N. B. Bhaktha, F. Beclin, M. Bouazaoui, B. Capoen, A. Chiasera, M. Ferrari, C. Kinowski, G. C. Righini, O. Robbe, S. Turrell, Enhanced fluorescence from Eu3+ in low-loss silica glass-ceramic waveguides with high SnO2 content, Applied Physics Letters 93 11904-1 - 211904-3 (2008) [doi: 10.1063/1.3037224]
  18. A. Bataille, A. Addad, C. Courtois, T. Duhoo, J. Crampon, Solute and defect segregation at the space charge layers of Fe-doped fine-grained Al2O3: Effect on the creep rate, Journal of the European Ceramic Society 28 1129-1134 (2008) [doi: 10.1016/j.jeurceramsoc.2007.09.054]
  19. G. Ehrhart, B. Capoen, O. Robbe, F. Béclin, P. Boy, S. Turrell, M. Bouazaoui, Energy transfer between semiconductor nanoparticles(ZnS or CdS) and Eu3+ ions in sol–gel derived ZrO2 thin films, Optical Materials 30 1595-1602 (2008) [doi: 10.1016/j.optmat.2007.10.004]
  20. N. Cornet, D. Goeuriot, C. Guerret-piécourt, D. Juvé, D. Tréheux, M. Touzin, H. J. Fitting, Electron Beam Charging of Insulators with Surface Layer and Leakage Currents, Journal of Applied Physics 103 064110 (2008) [doi: 10.1063/1.2890427]
  21. G. Bernard-granger, C. Guizard, A. Addad, Influence of co-doping on the sintering path and on the optical properties of a submicronic alumina material, Journal of the American Ceramic Society 91 1703-1706 (2008) [doi: 10.1111/j.1551-2916.2008.02335.x]
2007
  1. L. Guillou, D. Balloy, P. Supiot, V. Le courtois, Preparation of a multilayered composite catalyst for Fischer–Tropsch synthesis in a micro-chamber reactor, Applied Catalysis A: General 324 42-51 (2007) [doi: 10.1016/j.apcata.2007.03.006]
  2. D. Balloy, J. Y. Dauphin, J. C. Tissier, Study of the comportment of fatty acids and mineral oils on the surface of steel pieces during galvanization, Surface and Coatings Technology 202 479-485 (2007) [doi: 10.1016/j.surfcoat.2007.06.021]
  3. J. Bouquerel, K. Verbeken, B. C. D. Cooman, Y. Houbaert, J. V. Slycken, Physical based model static and dynamic behaviour of TRIP steel, Advanced materials research 15-17 744-749 (2007) [doi: 10.4028/www.scientific.net/AMR.15-17.744]
  4. J. V. Slycken, P. Verleysen, J. Degrieck, J. Bouquerel, B. C. D. Cooman, Dynamic response of aluminium containing TRIP steel and its constituent phases, Materials Science and Engineering A 460 516-524 (2007) [doi: 10.1016/j.msea.2007.01.075 ]
  5. J. V. Slycken, P. Verleysen, J. Degrieck, J. Bouquerel, B. C. D. Cooman, The effect of silicon, aluminium and phosphor on the dynamic behaviour and phenomenological modelling of multiphase TRIP steels, Metals and Materials International 13 93-101 (2007) [doi: 10.1007/BF03027558]
  6. A. Addad, F. Béclin, J. Crampon, R. Duclos, High temperature deformation of spinelle–zirconia composites: Effect of zirconia content, Ceramics International 33 1057-1063 (2007) [doi: 10.1016/j.ceramint.2006.03.008]
  7. M. Touzin, D. Goeuriot, C. Guerret-piécourt, H. J. Fitting, D. Tréheux, D. Juvé, Relationships between dielectric breakdown resistance and charge transport in alumina materials - effects of the microstructure, Journal of the European Ceramic Society 27 1193-1197 (2007) [doi: 10.1016/j.jeurceramsoc.2006.05.047]
  8. G. Bernard-granger, C. Guizard, A. Addad, Sintering of an ultra pure alpha-alumina powder: I. Densification, grain growth and sintering path, Journal of Materials Science 42 6316-6324 (2007) [doi: 10.1007/s10853-006-1206-1]
  9. H. J. Fitting, N. Cornet, M. Touzin, D. Goeuriot, C. Guerret-piécourt, D. Tréheux, Injection and selfconsistent charge transport in bulk insulators, Journal of the European Ceramic Society 27 3977-3982 (2007) [doi: 10.1016/j.jeurceramsoc.2007.02.078]
  10. P. Hivart, J. Crampon, Interfacial indentation test and adhesive fracture characteristics of plasma sprayed cermet Cr3C2/Ni–Cr coatings, Mechanics of Materials 39 998-1005 (2007) [doi: 10.1016/j.mechmat.2007.05.002]
2006
  1. J. Bouquerel, K. Verbeken, B. C. D. Cooman, Microstructure based model for the static mechanical behaviour of multiphase steels, Acta materialia 54 1443-1456 (2006) [doi: 10.1016/j.actamat.2005.10.059]
  2. S. J. Van, P. Verleysen, J. Degrieck, J. Bouquerel, Constitutive equations for multiphase TRIP steels at high rates of strain, Journal de Physique IV 134 69-74 (2006) [doi: 10.1051/jp4:2006134012]
  3. J. V. Slycken, P. Verleysen, J. Degrieck, J. Bouquerel, B. C. D. Cooman, Crashworthiness characterization and modelling of high strength steels for the automotive industry, Journal of automobile engineering 220 391-400 (2006) [doi: 10.1243/09544070JAUTO26]
  4. C. Courtois, J. Crampon, P. Champagne, C. Cochrane, N. Texier, A. Leriche, STEM-X-EDS analysis of morphotropic PZT ceramics: Analysis of Zr/Ti + Zr values fluctuation depending on microstructure and synthesis route of powders, Ceramics International 32 767-773 (2006) [doi: 10.1016/j.ceramint.2005.05.019]
  5. M. Touzin, D. Goeuriot, C. Guerret-piécourt, D. Juvé, D. Tréheux, H. J. Fitting, Electron Beam Charging of Insulators – a Selfconsistent Flight-Drift Model, Journal of Applied Physics 99 114110-114123 (2006) [doi: 10.1063/1.2201851]
2005
  1. E. Berrier, C. Zoller, F. Béclin, S. Turrell, M. Bouazaoui, B. Capoen, Microstructures and structural properties of sol-gel silica foams, Journal of Physical Chemistry B 109 22799-22807 (2005) [doi: 10.1021/jp053089]
  2. B. Capoen, V. Q. Lam, S. Turrell, J. P. Vilcot, F. Béclin, Y. Jestin, M. Bouazaoui, Study of structural and optical properties of InSb-doped SiO2 thin films, Journal of Non-Crystalline Solids 351 1819-1824 (2005) [doi: 10.1016/j.jnoncrysol.2005.04.023]
  3. N. Nuns, F. Béclin, J. Crampon, Space charge characterisation by EDS microanalysis in spinel MgAl2O4”, Journal of the European Ceramic Society 25 2809-2811 (2005) [doi: 10.1016/j.jeurceramsoc.2005.03.145]
  4. M. Lancry, M. Douay, P. Niay, F. Beclin, Y. Menke, D. Milanese, M. Ferraris, B. Poumellec, Self induced gratings in ternary SiO2:SnO2:Na2O bulk glasses by UV light seeding, Optics express 13 6878-6886 (2005) [doi: 10.1364/OPEX.13.006878 ]
  5. H. J. Fitting, X. Meyza, C. Guerret-piécourt, C. Dutriez, M. Touzin, D. Goeuriot, D. Tréheux, “Selfconsistent electrical charging in insulators”, Journal of the European Ceramic Society 25 2799-2803 (2005) [doi: 10.1016/j.jeurceramsoc.2005.03.143]
  6. O. Guillon, F. Thiebaud, D. Perreux, C. Courtois, P. Champagne, A. Leriche, J. Crampon, New considerations about the fracture mode of PZT ceramics, Journal of the European Ceramic Society 25 2421-2424 (2005) [doi: 10.1016/j.jeurceramsoc.2005.03.074]
  7. A. Bataille, J. Crampon, A. Addad, R. Duclos, Deformation behaviour of iron-doped alumina, Journal of the European Ceramic Society 25 857-862 (2005) [doi: 10.1016/j.jeurceramsoc.2004.01.006]

Métallurgie Physique et Génie des Matériaux

Equipements

Documents

Unité Matériaux et Transformations, CNRS UMR 8207, Université Lille1, Bâtiment C6, 59655 Villeneuve d'Ascq, France
Mentions Légales - Contacter le webmaster
Valid CSSValid HTML 4.01 Transitional